CDC MME CQL Calculator
3.0.0 - release

This page is part of the CDC Opioid MME Calculator (v3.0.0: Release) based on FHIR R4. This is the current published version. For a full list of available versions, see the Directory of published versions

Resource Profile: MMEMedicationRequest

Defining URL:http://fhir.org/guides/cdc/opioid-mme-r4/StructureDefinition/mmemedicationrequest
Version:3.0.0
Name:MMEMedicationRequest
Status:Draft as of 4/21/17
Definition:

Defines the minimum expectations for a MedicationRequest that can be used to successfully calculate Morphine Milligram Equivalent (MME)/day according to the CDC Opioid Prescribing guideline

Publisher:Alphora
Copyright:

Copyright 2019+ Centers for Disease Control and Prevention (CDC)

Source Resource:XML / JSON / Turtle

The official URL for this profile is: 

http://fhir.org/guides/cdc/opioid-mme-r4/StructureDefinition/mmemedicationrequest

Formal Views of Profile Content

Description of Profiles, Differentials, Snapshots and how the different presentations work.

This structure is derived from CPGMedicationRequest

Summary

Mandatory: 6 elements
Must-Support: 14 elements

This structure is derived from CPGMedicationRequest

NameFlagsCard.TypeDescription & Constraintsdoco
.. MedicationRequest 0..*CPGMedicationRequestOrdering of medication for patient or group
... medication[x] S1..1CodeableConceptMedication to be taken
... dosageInstruction S1..1DosageHow the medication should be taken
.... text S0..1stringFree text dosage instructions e.g. SIG
.... timing S1..1TimingWhen medication should be administered
..... repeat S1..1ElementWhen the event is to occur
...... frequency S0..1positiveIntEvent occurs frequency times per period
...... frequencyMax S0..1positiveIntEvent occurs up to frequencyMax times per period
...... period S0..1decimalEvent occurs frequency times per period
...... periodMax S0..1decimalUpper limit of period (3-4 hours)
...... periodUnit S0..1codes | min | h | d | wk | mo | a - unit of time (UCUM)
...... timeOfDay S0..*timeTime of day for action
.... asNeeded[x] S0..1booleanTake "as needed" (for x)
.... doseAndRate S1..1ElementAmount of medication administered
..... dose[x] S1..1Range, SimpleQuantityAmount of medication per dose

doco Documentation for this format
NameFlagsCard.TypeDescription & Constraintsdoco
.. MedicationRequest 0..*CPGMedicationRequestOrdering of medication for patient or group
... id Σ0..1stringLogical id of this artifact
... meta Σ0..1MetaMetadata about the resource
... implicitRules ?!Σ0..1uriA set of rules under which this content was created
... language 0..1codeLanguage of the resource content
Binding: CommonLanguages (preferred)
Max Binding: AllLanguages: A human language.

... text 0..1NarrativeText summary of the resource, for human interpretation
... contained 0..*ResourceContained, inline Resources
... Slices for extension 0..*ExtensionExtension
Slice: Unordered, Open by value:url
... cpg-rationale S0..1markdownExplanation
URL: http://hl7.org/fhir/uv/cpg/StructureDefinition/cpg-rationale
... modifierExtension ?!0..*ExtensionExtensions that cannot be ignored
... identifier S0..*IdentifierExternal ids for this request
... status ?!SΣ1..1codeactive | on-hold | cancelled | completed | entered-in-error | stopped | draft | unknown
Binding: medicationrequest Status (required): A coded concept specifying the state of the prescribing event. Describes the lifecycle of the prescription.

... statusReason 0..1CodeableConceptReason for current status
Binding: medicationRequest Status Reason Codes (example): Identifies the reasons for a given status.

... intent ?!SΣ1..1codeproposal | plan | order | original-order | reflex-order | filler-order | instance-order | option
Binding: medicationRequest Intent (required): The kind of medication order.

... category S0..*CodeableConceptType of medication usage
Binding: medicationRequest Category Codes (example): A coded concept identifying the category of medication request. For example, where the medication is to be consumed or administered, or the type of medication treatment.


... priority SΣ0..1coderoutine | urgent | asap | stat
Binding: RequestPriority (required): Identifies the level of importance to be assigned to actioning the request.

... doNotPerform ?!SΣ0..1booleanTrue if request is prohibiting action
... reported[x] Σ0..1Reported rather than primary record
.... reportedBooleanboolean
.... reportedReferenceReference(Patient | Practitioner | PractitionerRole | RelatedPerson | Organization)
... medication[x] SΣ1..1CodeableConceptMedication to be taken
Binding: SNOMEDCTMedicationCodes (example): A coded concept identifying substance or product that can be ordered.

... subject SΣ1..1Reference(CPGPatient)Who or group medication request is for
... encounter S0..1Reference(CPGEncounter)Encounter created as part of encounter/admission/stay
... supportingInformation S0..*Reference(Resource)Pertinent information
... authoredOn Σ0..1dateTimeWhen request was initially authored
... requester Σ0..1Reference(Practitioner | PractitionerRole | Organization | Patient | RelatedPerson | Device)Who/What requested the Request
... performer 0..1Reference(Practitioner | PractitionerRole | Organization | Patient | Device | RelatedPerson | CareTeam)Intended performer of administration
... performerType Σ0..1CodeableConceptDesired kind of performer of the medication administration
Binding: ProcedurePerformerRoleCodes (example): Identifies the type of individual that is desired to administer the medication.

... recorder 0..1Reference(Practitioner | PractitionerRole)Person who entered the request
... reasonCode 0..*CodeableConceptReason or indication for ordering or not ordering the medication
Binding: Condition/Problem/DiagnosisCodes (example): A coded concept indicating why the medication was ordered.


... reasonReference 0..*Reference(Condition | Observation)Condition or observation that supports why the prescription is being written
... instantiatesCanonical SΣ0..*canonical()Source
... instantiatesUri Σ0..*uriInstantiates external protocol or definition
... basedOn Σ0..*Reference(CarePlan | MedicationRequest | ServiceRequest | ImmunizationRecommendation)What request fulfills
... groupIdentifier Σ0..1IdentifierComposite request this is part of
... courseOfTherapyType 0..1CodeableConceptOverall pattern of medication administration
Binding: medicationRequest Course of Therapy Codes (example): Identifies the overall pattern of medication administratio.

... insurance 0..*Reference(Coverage | ClaimResponse)Associated insurance coverage
... note 0..*AnnotationInformation about the prescription
... dosageInstruction S1..1DosageHow the medication should be taken
.... id 0..1stringUnique id for inter-element referencing
.... Slices for extension 0..*ExtensionAdditional content defined by implementations
Slice: Unordered, Open by value:url
.... modifierExtension ?!Σ0..*ExtensionExtensions that cannot be ignored even if unrecognized
.... sequence Σ0..1integerThe order of the dosage instructions
.... text SΣ0..1stringFree text dosage instructions e.g. SIG
.... additionalInstruction Σ0..*CodeableConceptSupplemental instruction or warnings to the patient - e.g. "with meals", "may cause drowsiness"
Binding: SNOMEDCTAdditionalDosageInstructions (example): A coded concept identifying additional instructions such as "take with water" or "avoid operating heavy machinery".


.... patientInstruction Σ0..1stringPatient or consumer oriented instructions
.... timing SΣ1..1TimingWhen medication should be administered
..... id 0..1stringUnique id for inter-element referencing
..... Slices for extension 0..*ExtensionAdditional content defined by implementations
Slice: Unordered, Open by value:url
..... modifierExtension ?!Σ0..*ExtensionExtensions that cannot be ignored even if unrecognized
..... event Σ0..*dateTimeWhen the event occurs
..... repeat SΣI1..1ElementWhen the event is to occur
...... id 0..1stringUnique id for inter-element referencing
...... Slices for extension 0..*ExtensionAdditional content defined by implementations
Slice: Unordered, Open by value:url
...... bounds[x] Σ0..1Length/Range of lengths, or (Start and/or end) limits
....... boundsDurationDuration
....... boundsRangeRange
....... boundsPeriodPeriod
...... count Σ0..1positiveIntNumber of times to repeat
...... countMax Σ0..1positiveIntMaximum number of times to repeat
...... duration Σ0..1decimalHow long when it happens
...... durationMax Σ0..1decimalHow long when it happens (Max)
...... durationUnit Σ0..1codes | min | h | d | wk | mo | a - unit of time (UCUM)
Binding: UnitsOfTime (required): A unit of time (units from UCUM).

...... frequency SΣ0..1positiveIntEvent occurs frequency times per period
...... frequencyMax SΣ0..1positiveIntEvent occurs up to frequencyMax times per period
...... period SΣ0..1decimalEvent occurs frequency times per period
...... periodMax SΣ0..1decimalUpper limit of period (3-4 hours)
...... periodUnit SΣ0..1codes | min | h | d | wk | mo | a - unit of time (UCUM)
Binding: UnitsOfTime (required): A unit of time (units from UCUM).

...... dayOfWeek Σ0..*codemon | tue | wed | thu | fri | sat | sun
Binding: DaysOfWeek (required)
...... timeOfDay SΣ0..*timeTime of day for action
...... when Σ0..*codeCode for time period of occurrence
Binding: EventTiming (required): Real world event relating to the schedule.


...... offset Σ0..1unsignedIntMinutes from event (before or after)
..... code Σ0..1CodeableConceptBID | TID | QID | AM | PM | QD | QOD | +
Binding: TimingAbbreviation (preferred): Code for a known / defined timing pattern.

.... asNeeded[x] SΣ0..1booleanTake "as needed" (for x)
.... site Σ0..1CodeableConceptBody site to administer to
Binding: SNOMEDCTAnatomicalStructureForAdministrationSiteCodes (example): A coded concept describing the site location the medicine enters into or onto the body.

.... route Σ0..1CodeableConceptHow drug should enter body
Binding: SNOMEDCTRouteCodes (example): A coded concept describing the route or physiological path of administration of a therapeutic agent into or onto the body of a subject.

.... method Σ0..1CodeableConceptTechnique for administering medication
Binding: SNOMEDCTAdministrationMethodCodes (example): A coded concept describing the technique by which the medicine is administered.

.... doseAndRate SΣ1..1ElementAmount of medication administered
..... id 0..1stringUnique id for inter-element referencing
..... Slices for extension 0..*ExtensionAdditional content defined by implementations
Slice: Unordered, Open by value:url
..... type Σ0..1CodeableConceptThe kind of dose or rate specified
Binding: DoseAndRateType (example): The kind of dose or rate specified.

..... dose[x] SΣ1..1Amount of medication per dose
...... doseRangeRange
...... doseQuantityQuantity(SimpleQuantity)
..... rate[x] Σ0..1Amount of medication per unit of time
...... rateRatioRatio
...... rateRangeRange
...... rateQuantityQuantity(SimpleQuantity)
.... maxDosePerPeriod Σ0..1RatioUpper limit on medication per unit of time
.... maxDosePerAdministration Σ0..1SimpleQuantityUpper limit on medication per administration
.... maxDosePerLifetime Σ0..1SimpleQuantityUpper limit on medication per lifetime of the patient
... dispenseRequest 0..1BackboneElementMedication supply authorization
.... id 0..1stringUnique id for inter-element referencing
.... extension 0..*ExtensionAdditional content defined by implementations
.... modifierExtension ?!Σ0..*ExtensionExtensions that cannot be ignored even if unrecognized
.... initialFill 0..1BackboneElementFirst fill details
..... id 0..1stringUnique id for inter-element referencing
..... extension 0..*ExtensionAdditional content defined by implementations
..... modifierExtension ?!Σ0..*ExtensionExtensions that cannot be ignored even if unrecognized
..... quantity 0..1SimpleQuantityFirst fill quantity
..... duration 0..1DurationFirst fill duration
.... dispenseInterval 0..1DurationMinimum period of time between dispenses
.... validityPeriod 0..1PeriodTime period supply is authorized for
.... numberOfRepeatsAllowed 0..1unsignedIntNumber of refills authorized
.... quantity 0..1SimpleQuantityAmount of medication to supply per dispense
.... expectedSupplyDuration 0..1DurationNumber of days supply per dispense
.... performer 0..1Reference(Organization)Intended dispenser
... substitution 0..1BackboneElementAny restrictions on medication substitution
.... id 0..1stringUnique id for inter-element referencing
.... extension 0..*ExtensionAdditional content defined by implementations
.... modifierExtension ?!Σ0..*ExtensionExtensions that cannot be ignored even if unrecognized
.... allowed[x] 1..1Whether substitution is allowed or not
Binding: ActSubstanceAdminSubstitutionCode (example): Identifies the type of substitution allowed.

..... allowedBooleanboolean
..... allowedCodeableConceptCodeableConcept
.... reason 0..1CodeableConceptWhy should (not) substitution be made
Binding: SubstanceAdminSubstitutionReason (example): A coded concept describing the reason that a different medication should (or should not) be substituted from what was prescribed.

... priorPrescription 0..1Reference(MedicationRequest)An order/prescription that is being replaced
... detectedIssue 0..*Reference(DetectedIssue)Clinical Issue with action
... eventHistory 0..*Reference(Provenance)A list of events of interest in the lifecycle

doco Documentation for this format
NameFlagsCard.TypeDescription & Constraintsdoco
.. MedicationRequest 0..*CPGMedicationRequestOrdering of medication for patient or group
... cpg-rationale 0..1markdownExplanation
URL: http://hl7.org/fhir/uv/cpg/StructureDefinition/cpg-rationale
... identifier 0..*IdentifierExternal ids for this request
... status ?!Σ1..1codeactive | on-hold | cancelled | completed | entered-in-error | stopped | draft | unknown
Binding: medicationrequest Status (required): A coded concept specifying the state of the prescribing event. Describes the lifecycle of the prescription.

... category 0..*CodeableConceptType of medication usage
Binding: medicationRequest Category Codes (example): A coded concept identifying the category of medication request. For example, where the medication is to be consumed or administered, or the type of medication treatment.


... priority Σ0..1coderoutine | urgent | asap | stat
Binding: RequestPriority (required): Identifies the level of importance to be assigned to actioning the request.

... doNotPerform ?!Σ0..1booleanTrue if request is prohibiting action
... medication[x] Σ1..1CodeableConceptMedication to be taken
Binding: SNOMEDCTMedicationCodes (example): A coded concept identifying substance or product that can be ordered.

... subject Σ1..1Reference(CPGPatient)Who or group medication request is for
... encounter 0..1Reference(CPGEncounter)Encounter created as part of encounter/admission/stay
... supportingInformation 0..*Reference(Resource)Pertinent information
... instantiatesCanonical Σ0..*canonical()Source
... dosageInstruction 1..1DosageHow the medication should be taken
.... text Σ0..1stringFree text dosage instructions e.g. SIG
.... timing Σ1..1TimingWhen medication should be administered
..... repeat ΣI1..1ElementWhen the event is to occur
...... frequency Σ0..1positiveIntEvent occurs frequency times per period
...... frequencyMax Σ0..1positiveIntEvent occurs up to frequencyMax times per period
...... period Σ0..1decimalEvent occurs frequency times per period
...... periodMax Σ0..1decimalUpper limit of period (3-4 hours)
...... periodUnit Σ0..1codes | min | h | d | wk | mo | a - unit of time (UCUM)
Binding: UnitsOfTime (required): A unit of time (units from UCUM).

...... timeOfDay Σ0..*timeTime of day for action
.... asNeeded[x] Σ0..1booleanTake "as needed" (for x)
.... doseAndRate Σ1..1ElementAmount of medication administered
..... dose[x] Σ1..1Amount of medication per dose
...... doseRangeRange
...... doseQuantityQuantity(SimpleQuantity)

doco Documentation for this format

This structure is derived from CPGMedicationRequest

Summary

Mandatory: 6 elements
Must-Support: 14 elements

Differential View

This structure is derived from CPGMedicationRequest

NameFlagsCard.TypeDescription & Constraintsdoco
.. MedicationRequest 0..*CPGMedicationRequestOrdering of medication for patient or group
... medication[x] S1..1CodeableConceptMedication to be taken
... dosageInstruction S1..1DosageHow the medication should be taken
.... text S0..1stringFree text dosage instructions e.g. SIG
.... timing S1..1TimingWhen medication should be administered
..... repeat S1..1ElementWhen the event is to occur
...... frequency S0..1positiveIntEvent occurs frequency times per period
...... frequencyMax S0..1positiveIntEvent occurs up to frequencyMax times per period
...... period S0..1decimalEvent occurs frequency times per period
...... periodMax S0..1decimalUpper limit of period (3-4 hours)
...... periodUnit S0..1codes | min | h | d | wk | mo | a - unit of time (UCUM)
...... timeOfDay S0..*timeTime of day for action
.... asNeeded[x] S0..1booleanTake "as needed" (for x)
.... doseAndRate S1..1ElementAmount of medication administered
..... dose[x] S1..1Range, SimpleQuantityAmount of medication per dose

doco Documentation for this format

Snapshot View

NameFlagsCard.TypeDescription & Constraintsdoco
.. MedicationRequest 0..*CPGMedicationRequestOrdering of medication for patient or group
... id Σ0..1stringLogical id of this artifact
... meta Σ0..1MetaMetadata about the resource
... implicitRules ?!Σ0..1uriA set of rules under which this content was created
... language 0..1codeLanguage of the resource content
Binding: CommonLanguages (preferred)
Max Binding: AllLanguages: A human language.

... text 0..1NarrativeText summary of the resource, for human interpretation
... contained 0..*ResourceContained, inline Resources
... Slices for extension 0..*ExtensionExtension
Slice: Unordered, Open by value:url
... cpg-rationale S0..1markdownExplanation
URL: http://hl7.org/fhir/uv/cpg/StructureDefinition/cpg-rationale
... modifierExtension ?!0..*ExtensionExtensions that cannot be ignored
... identifier S0..*IdentifierExternal ids for this request
... status ?!SΣ1..1codeactive | on-hold | cancelled | completed | entered-in-error | stopped | draft | unknown
Binding: medicationrequest Status (required): A coded concept specifying the state of the prescribing event. Describes the lifecycle of the prescription.

... statusReason 0..1CodeableConceptReason for current status
Binding: medicationRequest Status Reason Codes (example): Identifies the reasons for a given status.

... intent ?!SΣ1..1codeproposal | plan | order | original-order | reflex-order | filler-order | instance-order | option
Binding: medicationRequest Intent (required): The kind of medication order.

... category S0..*CodeableConceptType of medication usage
Binding: medicationRequest Category Codes (example): A coded concept identifying the category of medication request. For example, where the medication is to be consumed or administered, or the type of medication treatment.


... priority SΣ0..1coderoutine | urgent | asap | stat
Binding: RequestPriority (required): Identifies the level of importance to be assigned to actioning the request.

... doNotPerform ?!SΣ0..1booleanTrue if request is prohibiting action
... reported[x] Σ0..1Reported rather than primary record
.... reportedBooleanboolean
.... reportedReferenceReference(Patient | Practitioner | PractitionerRole | RelatedPerson | Organization)
... medication[x] SΣ1..1CodeableConceptMedication to be taken
Binding: SNOMEDCTMedicationCodes (example): A coded concept identifying substance or product that can be ordered.

... subject SΣ1..1Reference(CPGPatient)Who or group medication request is for
... encounter S0..1Reference(CPGEncounter)Encounter created as part of encounter/admission/stay
... supportingInformation S0..*Reference(Resource)Pertinent information
... authoredOn Σ0..1dateTimeWhen request was initially authored
... requester Σ0..1Reference(Practitioner | PractitionerRole | Organization | Patient | RelatedPerson | Device)Who/What requested the Request
... performer 0..1Reference(Practitioner | PractitionerRole | Organization | Patient | Device | RelatedPerson | CareTeam)Intended performer of administration
... performerType Σ0..1CodeableConceptDesired kind of performer of the medication administration
Binding: ProcedurePerformerRoleCodes (example): Identifies the type of individual that is desired to administer the medication.

... recorder 0..1Reference(Practitioner | PractitionerRole)Person who entered the request
... reasonCode 0..*CodeableConceptReason or indication for ordering or not ordering the medication
Binding: Condition/Problem/DiagnosisCodes (example): A coded concept indicating why the medication was ordered.


... reasonReference 0..*Reference(Condition | Observation)Condition or observation that supports why the prescription is being written
... instantiatesCanonical SΣ0..*canonical()Source
... instantiatesUri Σ0..*uriInstantiates external protocol or definition
... basedOn Σ0..*Reference(CarePlan | MedicationRequest | ServiceRequest | ImmunizationRecommendation)What request fulfills
... groupIdentifier Σ0..1IdentifierComposite request this is part of
... courseOfTherapyType 0..1CodeableConceptOverall pattern of medication administration
Binding: medicationRequest Course of Therapy Codes (example): Identifies the overall pattern of medication administratio.

... insurance 0..*Reference(Coverage | ClaimResponse)Associated insurance coverage
... note 0..*AnnotationInformation about the prescription
... dosageInstruction S1..1DosageHow the medication should be taken
.... id 0..1stringUnique id for inter-element referencing
.... Slices for extension 0..*ExtensionAdditional content defined by implementations
Slice: Unordered, Open by value:url
.... modifierExtension ?!Σ0..*ExtensionExtensions that cannot be ignored even if unrecognized
.... sequence Σ0..1integerThe order of the dosage instructions
.... text SΣ0..1stringFree text dosage instructions e.g. SIG
.... additionalInstruction Σ0..*CodeableConceptSupplemental instruction or warnings to the patient - e.g. "with meals", "may cause drowsiness"
Binding: SNOMEDCTAdditionalDosageInstructions (example): A coded concept identifying additional instructions such as "take with water" or "avoid operating heavy machinery".


.... patientInstruction Σ0..1stringPatient or consumer oriented instructions
.... timing SΣ1..1TimingWhen medication should be administered
..... id 0..1stringUnique id for inter-element referencing
..... Slices for extension 0..*ExtensionAdditional content defined by implementations
Slice: Unordered, Open by value:url
..... modifierExtension ?!Σ0..*ExtensionExtensions that cannot be ignored even if unrecognized
..... event Σ0..*dateTimeWhen the event occurs
..... repeat SΣI1..1ElementWhen the event is to occur
...... id 0..1stringUnique id for inter-element referencing
...... Slices for extension 0..*ExtensionAdditional content defined by implementations
Slice: Unordered, Open by value:url
...... bounds[x] Σ0..1Length/Range of lengths, or (Start and/or end) limits
....... boundsDurationDuration
....... boundsRangeRange
....... boundsPeriodPeriod
...... count Σ0..1positiveIntNumber of times to repeat
...... countMax Σ0..1positiveIntMaximum number of times to repeat
...... duration Σ0..1decimalHow long when it happens
...... durationMax Σ0..1decimalHow long when it happens (Max)
...... durationUnit Σ0..1codes | min | h | d | wk | mo | a - unit of time (UCUM)
Binding: UnitsOfTime (required): A unit of time (units from UCUM).

...... frequency SΣ0..1positiveIntEvent occurs frequency times per period
...... frequencyMax SΣ0..1positiveIntEvent occurs up to frequencyMax times per period
...... period SΣ0..1decimalEvent occurs frequency times per period
...... periodMax SΣ0..1decimalUpper limit of period (3-4 hours)
...... periodUnit SΣ0..1codes | min | h | d | wk | mo | a - unit of time (UCUM)
Binding: UnitsOfTime (required): A unit of time (units from UCUM).

...... dayOfWeek Σ0..*codemon | tue | wed | thu | fri | sat | sun
Binding: DaysOfWeek (required)
...... timeOfDay SΣ0..*timeTime of day for action
...... when Σ0..*codeCode for time period of occurrence
Binding: EventTiming (required): Real world event relating to the schedule.


...... offset Σ0..1unsignedIntMinutes from event (before or after)
..... code Σ0..1CodeableConceptBID | TID | QID | AM | PM | QD | QOD | +
Binding: TimingAbbreviation (preferred): Code for a known / defined timing pattern.

.... asNeeded[x] SΣ0..1booleanTake "as needed" (for x)
.... site Σ0..1CodeableConceptBody site to administer to
Binding: SNOMEDCTAnatomicalStructureForAdministrationSiteCodes (example): A coded concept describing the site location the medicine enters into or onto the body.

.... route Σ0..1CodeableConceptHow drug should enter body
Binding: SNOMEDCTRouteCodes (example): A coded concept describing the route or physiological path of administration of a therapeutic agent into or onto the body of a subject.

.... method Σ0..1CodeableConceptTechnique for administering medication
Binding: SNOMEDCTAdministrationMethodCodes (example): A coded concept describing the technique by which the medicine is administered.

.... doseAndRate SΣ1..1ElementAmount of medication administered
..... id 0..1stringUnique id for inter-element referencing
..... Slices for extension 0..*ExtensionAdditional content defined by implementations
Slice: Unordered, Open by value:url
..... type Σ0..1CodeableConceptThe kind of dose or rate specified
Binding: DoseAndRateType (example): The kind of dose or rate specified.

..... dose[x] SΣ1..1Amount of medication per dose
...... doseRangeRange
...... doseQuantityQuantity(SimpleQuantity)
..... rate[x] Σ0..1Amount of medication per unit of time
...... rateRatioRatio
...... rateRangeRange
...... rateQuantityQuantity(SimpleQuantity)
.... maxDosePerPeriod Σ0..1RatioUpper limit on medication per unit of time
.... maxDosePerAdministration Σ0..1SimpleQuantityUpper limit on medication per administration
.... maxDosePerLifetime Σ0..1SimpleQuantityUpper limit on medication per lifetime of the patient
... dispenseRequest 0..1BackboneElementMedication supply authorization
.... id 0..1stringUnique id for inter-element referencing
.... extension 0..*ExtensionAdditional content defined by implementations
.... modifierExtension ?!Σ0..*ExtensionExtensions that cannot be ignored even if unrecognized
.... initialFill 0..1BackboneElementFirst fill details
..... id 0..1stringUnique id for inter-element referencing
..... extension 0..*ExtensionAdditional content defined by implementations
..... modifierExtension ?!Σ0..*ExtensionExtensions that cannot be ignored even if unrecognized
..... quantity 0..1SimpleQuantityFirst fill quantity
..... duration 0..1DurationFirst fill duration
.... dispenseInterval 0..1DurationMinimum period of time between dispenses
.... validityPeriod 0..1PeriodTime period supply is authorized for
.... numberOfRepeatsAllowed 0..1unsignedIntNumber of refills authorized
.... quantity 0..1SimpleQuantityAmount of medication to supply per dispense
.... expectedSupplyDuration 0..1DurationNumber of days supply per dispense
.... performer 0..1Reference(Organization)Intended dispenser
... substitution 0..1BackboneElementAny restrictions on medication substitution
.... id 0..1stringUnique id for inter-element referencing
.... extension 0..*ExtensionAdditional content defined by implementations
.... modifierExtension ?!Σ0..*ExtensionExtensions that cannot be ignored even if unrecognized
.... allowed[x] 1..1Whether substitution is allowed or not
Binding: ActSubstanceAdminSubstitutionCode (example): Identifies the type of substitution allowed.

..... allowedBooleanboolean
..... allowedCodeableConceptCodeableConcept
.... reason 0..1CodeableConceptWhy should (not) substitution be made
Binding: SubstanceAdminSubstitutionReason (example): A coded concept describing the reason that a different medication should (or should not) be substituted from what was prescribed.

... priorPrescription 0..1Reference(MedicationRequest)An order/prescription that is being replaced
... detectedIssue 0..*Reference(DetectedIssue)Clinical Issue with action
... eventHistory 0..*Reference(Provenance)A list of events of interest in the lifecycle

doco Documentation for this format

 

Other representations of profile: CSV, Excel, Schematron

Terminology Bindings

PathConformanceValueSet
MedicationRequest.languagepreferredCommonLanguages
Max Binding: AllLanguages
MedicationRequest.statusrequiredmedicationrequest Status
MedicationRequest.statusReasonexamplemedicationRequest Status Reason Codes
MedicationRequest.intentrequiredmedicationRequest Intent
MedicationRequest.categoryexamplemedicationRequest Category Codes
MedicationRequest.priorityrequiredRequestPriority
MedicationRequest.medication[x]exampleSNOMEDCTMedicationCodes
MedicationRequest.performerTypeexampleProcedurePerformerRoleCodes
MedicationRequest.reasonCodeexampleCondition/Problem/DiagnosisCodes
MedicationRequest.courseOfTherapyTypeexamplemedicationRequest Course of Therapy Codes
MedicationRequest.dosageInstruction.additionalInstructionexampleSNOMEDCTAdditionalDosageInstructions
MedicationRequest.dosageInstruction.timing.repeat.durationUnitrequiredUnitsOfTime
MedicationRequest.dosageInstruction.timing.repeat.periodUnitrequiredUnitsOfTime
MedicationRequest.dosageInstruction.timing.repeat.dayOfWeekrequiredDaysOfWeek
MedicationRequest.dosageInstruction.timing.repeat.whenrequiredEventTiming
MedicationRequest.dosageInstruction.timing.codepreferredTimingAbbreviation
MedicationRequest.dosageInstruction.siteexampleSNOMEDCTAnatomicalStructureForAdministrationSiteCodes
MedicationRequest.dosageInstruction.routeexampleSNOMEDCTRouteCodes
MedicationRequest.dosageInstruction.methodexampleSNOMEDCTAdministrationMethodCodes
MedicationRequest.dosageInstruction.doseAndRate.typeexampleDoseAndRateType
MedicationRequest.substitution.allowed[x]exampleActSubstanceAdminSubstitutionCode
MedicationRequest.substitution.reasonexampleSubstanceAdminSubstitutionReason

Constraints

IdPathDetailsRequirements
dom-2MedicationRequestIf the resource is contained in another resource, it SHALL NOT contain nested Resources
: contained.contained.empty()
dom-3MedicationRequestIf the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource
: contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty()
dom-4MedicationRequestIf a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated
: contained.meta.versionId.empty() and contained.meta.lastUpdated.empty()
dom-5MedicationRequestIf a resource is contained in another resource, it SHALL NOT have a security label
: contained.meta.security.empty()
dom-6MedicationRequestA resource should have narrative for robust management
: text.`div`.exists()
ele-1MedicationRequest.metaAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ele-1MedicationRequest.implicitRulesAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ele-1MedicationRequest.languageAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ele-1MedicationRequest.textAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ele-1MedicationRequest.extensionAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ext-1MedicationRequest.extensionMust have either extensions or value[x], not both
: extension.exists() != value.exists()
ele-1MedicationRequest.extension:rationaleAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ext-1MedicationRequest.extension:rationaleMust have either extensions or value[x], not both
: extension.exists() != value.exists()
ele-1MedicationRequest.modifierExtensionAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ext-1MedicationRequest.modifierExtensionMust have either extensions or value[x], not both
: extension.exists() != value.exists()
ele-1MedicationRequest.identifierAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ele-1MedicationRequest.statusAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ele-1MedicationRequest.statusReasonAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ele-1MedicationRequest.intentAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ele-1MedicationRequest.categoryAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ele-1MedicationRequest.priorityAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ele-1MedicationRequest.doNotPerformAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ele-1MedicationRequest.reported[x]All FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ele-1MedicationRequest.medication[x]All FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ele-1MedicationRequest.subjectAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ele-1MedicationRequest.encounterAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ele-1MedicationRequest.supportingInformationAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ele-1MedicationRequest.authoredOnAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ele-1MedicationRequest.requesterAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ele-1MedicationRequest.performerAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ele-1MedicationRequest.performerTypeAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ele-1MedicationRequest.recorderAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ele-1MedicationRequest.reasonCodeAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ele-1MedicationRequest.reasonReferenceAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ele-1MedicationRequest.instantiatesCanonicalAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ele-1MedicationRequest.instantiatesUriAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ele-1MedicationRequest.basedOnAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ele-1MedicationRequest.groupIdentifierAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ele-1MedicationRequest.courseOfTherapyTypeAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ele-1MedicationRequest.insuranceAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ele-1MedicationRequest.noteAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ele-1MedicationRequest.dosageInstructionAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ele-1MedicationRequest.dosageInstruction.extensionAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ext-1MedicationRequest.dosageInstruction.extensionMust have either extensions or value[x], not both
: extension.exists() != value.exists()
ele-1MedicationRequest.dosageInstruction.modifierExtensionAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ext-1MedicationRequest.dosageInstruction.modifierExtensionMust have either extensions or value[x], not both
: extension.exists() != value.exists()
ele-1MedicationRequest.dosageInstruction.sequenceAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ele-1MedicationRequest.dosageInstruction.textAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ele-1MedicationRequest.dosageInstruction.additionalInstructionAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ele-1MedicationRequest.dosageInstruction.patientInstructionAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ele-1MedicationRequest.dosageInstruction.timingAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ele-1MedicationRequest.dosageInstruction.timing.extensionAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ext-1MedicationRequest.dosageInstruction.timing.extensionMust have either extensions or value[x], not both
: extension.exists() != value.exists()
ele-1MedicationRequest.dosageInstruction.timing.modifierExtensionAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ext-1MedicationRequest.dosageInstruction.timing.modifierExtensionMust have either extensions or value[x], not both
: extension.exists() != value.exists()
ele-1MedicationRequest.dosageInstruction.timing.eventAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ele-1MedicationRequest.dosageInstruction.timing.repeatAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
tim-1MedicationRequest.dosageInstruction.timing.repeatif there's a duration, there needs to be duration units
: duration.empty() or durationUnit.exists()
tim-2MedicationRequest.dosageInstruction.timing.repeatif there's a period, there needs to be period units
: period.empty() or periodUnit.exists()
tim-4MedicationRequest.dosageInstruction.timing.repeatduration SHALL be a non-negative value
: duration.exists() implies duration >= 0
tim-5MedicationRequest.dosageInstruction.timing.repeatperiod SHALL be a non-negative value
: period.exists() implies period >= 0
tim-6MedicationRequest.dosageInstruction.timing.repeatIf there's a periodMax, there must be a period
: periodMax.empty() or period.exists()
tim-7MedicationRequest.dosageInstruction.timing.repeatIf there's a durationMax, there must be a duration
: durationMax.empty() or duration.exists()
tim-8MedicationRequest.dosageInstruction.timing.repeatIf there's a countMax, there must be a count
: countMax.empty() or count.exists()
tim-9MedicationRequest.dosageInstruction.timing.repeatIf there's an offset, there must be a when (and not C, CM, CD, CV)
: offset.empty() or (when.exists() and ((when in ('C' | 'CM' | 'CD' | 'CV')).not()))
tim-10MedicationRequest.dosageInstruction.timing.repeatIf there's a timeOfDay, there cannot be a when, or vice versa
: timeOfDay.empty() or when.empty()
ele-1MedicationRequest.dosageInstruction.timing.repeat.extensionAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ext-1MedicationRequest.dosageInstruction.timing.repeat.extensionMust have either extensions or value[x], not both
: extension.exists() != value.exists()
ele-1MedicationRequest.dosageInstruction.timing.repeat.bounds[x]All FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ele-1MedicationRequest.dosageInstruction.timing.repeat.countAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ele-1MedicationRequest.dosageInstruction.timing.repeat.countMaxAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ele-1MedicationRequest.dosageInstruction.timing.repeat.durationAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ele-1MedicationRequest.dosageInstruction.timing.repeat.durationMaxAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ele-1MedicationRequest.dosageInstruction.timing.repeat.durationUnitAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ele-1MedicationRequest.dosageInstruction.timing.repeat.frequencyAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ele-1MedicationRequest.dosageInstruction.timing.repeat.frequencyMaxAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ele-1MedicationRequest.dosageInstruction.timing.repeat.periodAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ele-1MedicationRequest.dosageInstruction.timing.repeat.periodMaxAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ele-1MedicationRequest.dosageInstruction.timing.repeat.periodUnitAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ele-1MedicationRequest.dosageInstruction.timing.repeat.dayOfWeekAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ele-1MedicationRequest.dosageInstruction.timing.repeat.timeOfDayAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ele-1MedicationRequest.dosageInstruction.timing.repeat.whenAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ele-1MedicationRequest.dosageInstruction.timing.repeat.offsetAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ele-1MedicationRequest.dosageInstruction.timing.codeAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ele-1MedicationRequest.dosageInstruction.asNeeded[x]All FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ele-1MedicationRequest.dosageInstruction.siteAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ele-1MedicationRequest.dosageInstruction.routeAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ele-1MedicationRequest.dosageInstruction.methodAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ele-1MedicationRequest.dosageInstruction.doseAndRateAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ele-1MedicationRequest.dosageInstruction.doseAndRate.extensionAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ext-1MedicationRequest.dosageInstruction.doseAndRate.extensionMust have either extensions or value[x], not both
: extension.exists() != value.exists()
ele-1MedicationRequest.dosageInstruction.doseAndRate.typeAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ele-1MedicationRequest.dosageInstruction.doseAndRate.dose[x]All FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ele-1MedicationRequest.dosageInstruction.doseAndRate.rate[x]All FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ele-1MedicationRequest.dosageInstruction.maxDosePerPeriodAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ele-1MedicationRequest.dosageInstruction.maxDosePerAdministrationAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ele-1MedicationRequest.dosageInstruction.maxDosePerLifetimeAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ele-1MedicationRequest.dispenseRequestAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ele-1MedicationRequest.dispenseRequest.extensionAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ext-1MedicationRequest.dispenseRequest.extensionMust have either extensions or value[x], not both
: extension.exists() != value.exists()
ele-1MedicationRequest.dispenseRequest.modifierExtensionAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ext-1MedicationRequest.dispenseRequest.modifierExtensionMust have either extensions or value[x], not both
: extension.exists() != value.exists()
ele-1MedicationRequest.dispenseRequest.initialFillAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ele-1MedicationRequest.dispenseRequest.initialFill.extensionAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ext-1MedicationRequest.dispenseRequest.initialFill.extensionMust have either extensions or value[x], not both
: extension.exists() != value.exists()
ele-1MedicationRequest.dispenseRequest.initialFill.modifierExtensionAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ext-1MedicationRequest.dispenseRequest.initialFill.modifierExtensionMust have either extensions or value[x], not both
: extension.exists() != value.exists()
ele-1MedicationRequest.dispenseRequest.initialFill.quantityAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ele-1MedicationRequest.dispenseRequest.initialFill.durationAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ele-1MedicationRequest.dispenseRequest.dispenseIntervalAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ele-1MedicationRequest.dispenseRequest.validityPeriodAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ele-1MedicationRequest.dispenseRequest.numberOfRepeatsAllowedAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ele-1MedicationRequest.dispenseRequest.quantityAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ele-1MedicationRequest.dispenseRequest.expectedSupplyDurationAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ele-1MedicationRequest.dispenseRequest.performerAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ele-1MedicationRequest.substitutionAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ele-1MedicationRequest.substitution.extensionAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ext-1MedicationRequest.substitution.extensionMust have either extensions or value[x], not both
: extension.exists() != value.exists()
ele-1MedicationRequest.substitution.modifierExtensionAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ext-1MedicationRequest.substitution.modifierExtensionMust have either extensions or value[x], not both
: extension.exists() != value.exists()
ele-1MedicationRequest.substitution.allowed[x]All FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ele-1MedicationRequest.substitution.reasonAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ele-1MedicationRequest.priorPrescriptionAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ele-1MedicationRequest.detectedIssueAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ele-1MedicationRequest.eventHistoryAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())