ValueSet-dicom-cid-9401-IEC61217DevicePositionParameter

Include these codes as defined in http://dicom.nema.org/resources/ontology/DCM

Code	Display	Definition
126807	IEC61217 Table Top Longitudinal Position	Longitudinal displacement of the table top, in mm (in the IEC TABLE TOP Coordinate system) as defined by .
126808	IEC61217 Table Top Vertical Position	Vertical displacement of the table top, in mm (in the IEC TABLE TOP Coordinate System) as defined by .
126809	IEC61217 Gantry Continuous Roll Angle	Rotation of the gantry (around the Y-axis of the IEC FIXED REFERENCE Coordinate System) as defined by . DICOM represents this value as a Continuous Rotation Angle in degrees.
126810	IEC61217 Gantry Continuous Pitch Angle	Pitch angle of rotation of the gantry around the X-axis of the IEC GANTRY Coordinate System. This parameter is not specifically defined by , but is consistent with . DICOM represents this value as a Continuous Rotation Angle in degrees.
126811	IEC61217 Gantry Continuous Yaw Angle	Yaw angle of rotation of the gantry around the Z-axis of the IEC GANTRY Coordinate System This parameter is not specifically defined by , but is consistent with . DICOM represents this value as a Continuous Rotation Angle in degrees.
126801	IEC61217 Patient Support Continuous Yaw Angle	Patient Support isocentric rotation (in the IEC FIXED REFERENCE Coordinate System) as defined by . DICOM represents this value as a Continuous Rotation Angle in degrees.
126802	IEC61217 Table Top Continuous Pitch Angle	Pitch of the Table Top (in the IEC TABLE TOP Coordinate System) as defined by . DICOM represents this value as a Continous Rotation Angle in degrees.
126803	IEC61217 Table Top Continuous Roll Angle	Roll of the Table Top (in the IEC TABLE TOP Coordinate System) as defined by . DICOM represents this value as a Continous Rotation Angle in degrees.
126804	IEC61217 Table Top Eccentric Axis Distance	Eccentric axis offset, in mm (in the IEC PATIENT SUPPORT Coordinate System) as defined by .
126805	IEC61217 Table Top Continuous Eccentric Angle	Table Top eccentric rotation (in the IEC TABLE TOP ECCENTRIC Coordinate System) as defined by . DICOM represents this value as a Continuous Rotation Angle in degrees.
126806	IEC61217 Table Top Lateral Position	Lateral displacement of the table top, in mm (in the IEC TABLE TOP Coordinate System) as defined by .