ValueSet-dicom-cid-71-ImagingAgentAdministrationInjectorEventType

Include these codes as defined in http://dicom.nema.org/resources/ontology/DCM

Code	Display	Definition
130160	Terminated due to unspecified injector failure	The injector device detected an unspecified failure and automaticallyterminated the administration.
130164	Syringe detached	The injector device detected that a syringe was detached from the injector.
130163	Syringe attached	The injector device detected that a syringe was attached to the injector.
130162	Keep vein open ended	The injector device ended saline flow for the purpose of keeping vein open.
130161	Keep vein open started	The injector device started saline flow for the purpose of keeping vein open.
130267	Manual hold started	A manual intervention of the technologist initiated an injector hold/wait state.
130266	Programmed hold started	A programmed administration phase initiated an injector hold/wait state.
130269	Terminated hold due to timeout	The injector terminated injection processing from hold/wait after exceeding a time limit.
130268	Manual resume from hold	A manual intervention of the technologist has resumed injector fluid administration. It does not matter if the hold/wait state was initiated programmed or manually.
130153	Flow rate above adjustment limit	The injector device detected a flow rate above the adjustment limit, took compensating action and did not automatically terminate the administration.
130175	Air detected	The injector device detected air in the tubing or syringe before or during the Imaging Agent administration and did not automatically terminate the administration.
130152	Flow rate above warning limit	The injector device detected a flow rate above the warning threshold, generated a warning and did not automatically terminate the administration.
130151	Pressure above adjustment limit	The injector device detected a pressure above the adjustment limit, took compensating action and did not automatically terminate the administration.
130150	Pressure above warning limit	The injector device detected a pressure above the warning threshold, generated a warning and did not automatically terminate the administration.
130157	Terminated due to flow rate above termination limit	The injector device detected a flow rate above the termination limit and automatically terminated the administration.
130179	Terminated due to consumable removal	The injector device detected removal of a consumable from the injector device and terminated the administration.
130156	Terminated due to pressure above termination limit	The injector device detected a pressure above the termination limit and automatically terminated the administration.
130178	Terminated due to critical battery level	The injector device detected critical battery level and terminated the administration.
130155	Fixed duration pause ended	The device detected that a pause duration has been reached and the device resumed automatically.
130177	Terminated by scanner	The injector device received instruction from scanner to terminate the administration and terminated the administration.
110501	Equipment failure	Equipment failure prevented completion of procedure.
130176	Terminated due to air detected	The injector device detected air in the tubing or syringe and terminated the administration.
130154	Terminated due to request from operator	The injector device terminated the administration due to detection of an abort request by the operator.
130159	Terminated due to injector communication loss	The injector device detected a communication loss and automaticallyterminated the administration.
130158	Terminated due to excessive duration pause	The Injector device detected that a pause duration has exceeded limit and the injector device terminated the administration.
110527	Resource inadequate	Procedure discontinued due to necessary equipment, staff or other resource being inadequate to complete the procedure.