HRSA 2023 Uniform Data System (UDS) Patient Level Submission (PLS) (UDS+) FHIR IG
1.0.1 - STU1 Release 1 - Standard for Trial-Use International flag

This page is part of the HRSA Uniform Data System (UDS) Patient Level Submission (PLS) (UDS+ or uds-plus) FHIR IG (v1.0.1: STU1) based on FHIR (HL7® FHIR® Standard) R4. This is the current published version in its permanent home (it will always be available at this URL). For a full list of available versions, see the Directory of published versions

Resource Profile: UDSPlusPatientReportingParameters - Detailed Descriptions

Page standards status: Trial-use Maturity Level: 2

Definitions for the uds-plus-patient-reporting-parameters resource profile.

Guidance on how to interpret the contents of this table can be found here

0. Parameters
Definition

The UDS+ profile is based on the **Parameters FHIR Resource and establishes the core elements, extensions, vocabularies and value sets for representing the Patients and if they are counted for the various reports.

ShortUDS Plus Patient Reporting Parameters
2. Parameters.parameter
Control2..*
Must Supporttrue
SlicingThis element introduces a set of slices on Parameters.parameter. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ $this.name
4. Parameters.parameter:patientReference
Slice NamepatientReference
Control1..1
Must Supporttrue
6. Parameters.parameter:patientReference.name
Control1..1
Must Supporttrue
Fixed ValuepatientReference
8. Parameters.parameter:patientReference.valueReference
Control1..1
TypeReference
Must Supporttrue
10. Parameters.parameter:combinedFundingStreams
Slice NamecombinedFundingStreams
Control1..1
Must Supporttrue
12. Parameters.parameter:combinedFundingStreams.name
Control1..1
Must Supporttrue
Fixed ValuecombinedFundingStreams
14. Parameters.parameter:combinedFundingStreams.value[x]
Control1..1
Typestring
[x] NoteSee Choice of Data Types for further information about how to use [x]
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
16. Parameters.parameter:reportNames
Slice NamereportNames
Control1..1
Must Supporttrue
18. Parameters.parameter:reportNames.name
Control1..1
Must Supporttrue
Fixed ValuereportNames
20. Parameters.parameter:reportNames.part
Control0..*
Must Supporttrue
SlicingThis element introduces a set of slices on Parameters.parameter.part. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ $this.name
22. Parameters.parameter:reportNames.part:patientsByZip
Slice NamepatientsByZip
Control1..1
Must Supporttrue
24. Parameters.parameter:reportNames.part:patientsByZip.name
Control1..1
Must Supporttrue
Fixed ValuepatientsByZip
26. Parameters.parameter:reportNames.part:patientsByZip.value[x]
Control1..1
Typeboolean
[x] NoteSee Choice of Data Types for further information about how to use [x]
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
28. Parameters.parameter:reportNames.part:table3A
Slice Nametable3A
Control1..1
Must Supporttrue
30. Parameters.parameter:reportNames.part:table3A.name
Control1..1
Must Supporttrue
Fixed Valuetable3A
32. Parameters.parameter:reportNames.part:table3A.value[x]
Control1..1
Typeboolean
[x] NoteSee Choice of Data Types for further information about how to use [x]
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
34. Parameters.parameter:reportNames.part:table3B
Slice Nametable3B
Control1..1
Must Supporttrue
36. Parameters.parameter:reportNames.part:table3B.name
Control1..1
Must Supporttrue
Fixed Valuetable3B
38. Parameters.parameter:reportNames.part:table3B.value[x]
Control1..1
Typeboolean
[x] NoteSee Choice of Data Types for further information about how to use [x]
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
40. Parameters.parameter:reportNames.part:table4
Slice Nametable4
Control1..1
Must Supporttrue
42. Parameters.parameter:reportNames.part:table4.name
Control1..1
Must Supporttrue
Fixed Valuetable4
44. Parameters.parameter:reportNames.part:table4.value[x]
Control1..1
Typeboolean
[x] NoteSee Choice of Data Types for further information about how to use [x]
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
46. Parameters.parameter:reportNames.part:table6A
Slice Nametable6A
Control1..1
Must Supporttrue
48. Parameters.parameter:reportNames.part:table6A.name
Control1..1
Must Supporttrue
Fixed Valuetable6A
50. Parameters.parameter:reportNames.part:table6A.value[x]
Control1..1
Typeboolean
[x] NoteSee Choice of Data Types for further information about how to use [x]
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
52. Parameters.parameter:reportNames.part:table6B-Line1-6
Slice Nametable6B-Line1-6
Control1..1
Must Supporttrue
54. Parameters.parameter:reportNames.part:table6B-Line1-6.name
Control1..1
Must Supporttrue
Fixed Valuetable6B-Line1-6-Age-Of-Prenatal-Care-Patients
56. Parameters.parameter:reportNames.part:table6B-Line1-6.value[x]
Control1..1
Typeboolean
[x] NoteSee Choice of Data Types for further information about how to use [x]
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
58. Parameters.parameter:reportNames.part:table6B-Line7-9
Slice Nametable6B-Line7-9
Control1..1
Must Supporttrue
60. Parameters.parameter:reportNames.part:table6B-Line7-9.name
Control1..1
Must Supporttrue
Fixed Valuetable6B-Line7-9-Early-Entry-Into-Prenatal-Care
62. Parameters.parameter:reportNames.part:table6B-Line7-9.value[x]
Control1..1
Typeboolean
[x] NoteSee Choice of Data Types for further information about how to use [x]
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
64. Parameters.parameter:reportNames.part:table6B-Line10
Slice Nametable6B-Line10
Control1..1
Must Supporttrue
66. Parameters.parameter:reportNames.part:table6B-Line10.name
Control1..1
Must Supporttrue
Fixed Valuetable6B-Line10-Childhood-Immunization-Status-CMS117
68. Parameters.parameter:reportNames.part:table6B-Line10.value[x]
Control1..1
Typeboolean
[x] NoteSee Choice of Data Types for further information about how to use [x]
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
70. Parameters.parameter:reportNames.part:table6B-Line11
Slice Nametable6B-Line11
Control1..1
Must Supporttrue
72. Parameters.parameter:reportNames.part:table6B-Line11.name
Control1..1
Must Supporttrue
Fixed Valuetable6B-Line11-Cervical-Cancer-Screening-CMS124
74. Parameters.parameter:reportNames.part:table6B-Line11.value[x]
Control1..1
Typeboolean
[x] NoteSee Choice of Data Types for further information about how to use [x]
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
76. Parameters.parameter:reportNames.part:table6B-Line11a
Slice Nametable6B-Line11a
Control1..1
Must Supporttrue
78. Parameters.parameter:reportNames.part:table6B-Line11a.name
Control1..1
Must Supporttrue
Fixed Valuetable6B-Line11a-Breast-Cancer-Screening-CMS125
80. Parameters.parameter:reportNames.part:table6B-Line11a.value[x]
Control1..1
Typeboolean
[x] NoteSee Choice of Data Types for further information about how to use [x]
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
82. Parameters.parameter:reportNames.part:table6B-Line12
Slice Nametable6B-Line12
Control1..1
Must Supporttrue
84. Parameters.parameter:reportNames.part:table6B-Line12.name
Control1..1
Must Supporttrue
Fixed Valuetable6B-Line12-Weight-Assessment-And-Counselling-CMS155
86. Parameters.parameter:reportNames.part:table6B-Line12.value[x]
Control1..1
Typeboolean
[x] NoteSee Choice of Data Types for further information about how to use [x]
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
88. Parameters.parameter:reportNames.part:table6B-Line13
Slice Nametable6B-Line13
Control1..1
Must Supporttrue
90. Parameters.parameter:reportNames.part:table6B-Line13.name
Control1..1
Must Supporttrue
Fixed Valuetable6B-Line13-Preventive-Care-And-Screening-BMI-CMS69
92. Parameters.parameter:reportNames.part:table6B-Line13.value[x]
Control1..1
Typeboolean
[x] NoteSee Choice of Data Types for further information about how to use [x]
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
94. Parameters.parameter:reportNames.part:table6B-Line14a
Slice Nametable6B-Line14a
Control1..1
Must Supporttrue
96. Parameters.parameter:reportNames.part:table6B-Line14a.name
Control1..1
Must Supporttrue
Fixed Valuetable6B-Line14a-Preventive-Care-And-Screening-Tobacco-Use-CMS138
98. Parameters.parameter:reportNames.part:table6B-Line14a.value[x]
Control1..1
Typeboolean
[x] NoteSee Choice of Data Types for further information about how to use [x]
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
100. Parameters.parameter:reportNames.part:table6B-Line17a
Slice Nametable6B-Line17a
Control1..1
Must Supporttrue
102. Parameters.parameter:reportNames.part:table6B-Line17a.name
Control1..1
Must Supporttrue
Fixed Valuetable6B-Line17a-Statin-Therapy-CMS347
104. Parameters.parameter:reportNames.part:table6B-Line17a.value[x]
Control1..1
Typeboolean
[x] NoteSee Choice of Data Types for further information about how to use [x]
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
106. Parameters.parameter:reportNames.part:table6B-Line18
Slice Nametable6B-Line18
Control1..1
Must Supporttrue
108. Parameters.parameter:reportNames.part:table6B-Line18.name
Control1..1
Must Supporttrue
Fixed Valuetable6B-Line18-Ischmic-Vascular-Disease-CMS164
110. Parameters.parameter:reportNames.part:table6B-Line18.value[x]
Control1..1
Typeboolean
[x] NoteSee Choice of Data Types for further information about how to use [x]
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
112. Parameters.parameter:reportNames.part:table6B-Line19
Slice Nametable6B-Line19
Control1..1
Must Supporttrue
114. Parameters.parameter:reportNames.part:table6B-Line19.name
Control1..1
Must Supporttrue
Fixed Valuetable6B-Line19-Colorectal-Cancer-Screening-CMS130
116. Parameters.parameter:reportNames.part:table6B-Line19.value[x]
Control1..1
Typeboolean
[x] NoteSee Choice of Data Types for further information about how to use [x]
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
118. Parameters.parameter:reportNames.part:table6B-Line20
Slice Nametable6B-Line20
Control1..1
Must Supporttrue
120. Parameters.parameter:reportNames.part:table6B-Line20.name
Control1..1
Must Supporttrue
Fixed Valuetable6B-Line20-HIV-Linkage-To-Care
122. Parameters.parameter:reportNames.part:table6B-Line20.value[x]
Control1..1
Typeboolean
[x] NoteSee Choice of Data Types for further information about how to use [x]
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
124. Parameters.parameter:reportNames.part:table6B-Line20a
Slice Nametable6B-Line20a
Control1..1
Must Supporttrue
126. Parameters.parameter:reportNames.part:table6B-Line20a.name
Control1..1
Must Supporttrue
Fixed Valuetable6B-Line20a-HIV-Screening-CMS349
128. Parameters.parameter:reportNames.part:table6B-Line20a.value[x]
Control1..1
Typeboolean
[x] NoteSee Choice of Data Types for further information about how to use [x]
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
130. Parameters.parameter:reportNames.part:table6B-Line21
Slice Nametable6B-Line21
Control1..1
Must Supporttrue
132. Parameters.parameter:reportNames.part:table6B-Line21.name
Control1..1
Must Supporttrue
Fixed Valuetable6B-Line21-Preventive-Care-And-Screening-For-Depression-CMS2
134. Parameters.parameter:reportNames.part:table6B-Line21.value[x]
Control1..1
Typeboolean
[x] NoteSee Choice of Data Types for further information about how to use [x]
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
136. Parameters.parameter:reportNames.part:table6B-Line21a
Slice Nametable6B-Line21a
Control1..1
Must Supporttrue
138. Parameters.parameter:reportNames.part:table6B-Line21a.name
Control1..1
Must Supporttrue
Fixed Valuetable6B-Line21a-Depression-Remission-At-Twelve-Months-CMS159
140. Parameters.parameter:reportNames.part:table6B-Line21a.value[x]
Control1..1
Typeboolean
[x] NoteSee Choice of Data Types for further information about how to use [x]
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
142. Parameters.parameter:reportNames.part:table6B-Line22
Slice Nametable6B-Line22
Control1..1
Must Supporttrue
144. Parameters.parameter:reportNames.part:table6B-Line22.name
Control1..1
Must Supporttrue
Fixed Valuetable6B-Line22-Dental-Sealants-For-Children-CMS277
146. Parameters.parameter:reportNames.part:table6B-Line22.value[x]
Control1..1
Typeboolean
[x] NoteSee Choice of Data Types for further information about how to use [x]
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
148. Parameters.parameter:reportNames.part:table7-Line0
Slice Nametable7-Line0
Control1..1
Must Supporttrue
150. Parameters.parameter:reportNames.part:table7-Line0.name
Control1..1
Must Supporttrue
Fixed Valuetable7-Line0-HIV-Positive-Pregnant-Patients
152. Parameters.parameter:reportNames.part:table7-Line0.value[x]
Control1..1
Typeboolean
[x] NoteSee Choice of Data Types for further information about how to use [x]
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
154. Parameters.parameter:reportNames.part:table7-Line2
Slice Nametable7-Line2
Control1..1
Must Supporttrue
156. Parameters.parameter:reportNames.part:table7-Line2.name
Control1..1
Must Supporttrue
Fixed Valuetable7-Line2-Deliveries-Performed-By-Health-Center
158. Parameters.parameter:reportNames.part:table7-Line2.value[x]
Control1..1
Typeboolean
[x] NoteSee Choice of Data Types for further information about how to use [x]
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
160. Parameters.parameter:reportNames.part:table7-Line1a-d
Slice Nametable7-Line1a-d
Control1..1
Must Supporttrue
162. Parameters.parameter:reportNames.part:table7-Line1a-d.name
Control1..1
Must Supporttrue
Fixed Valuetable7-Line1a-d-Prenatal-Care-Patient-Deliveries
164. Parameters.parameter:reportNames.part:table7-Line1a-d.value[x]
Control1..1
Typeboolean
[x] NoteSee Choice of Data Types for further information about how to use [x]
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
166. Parameters.parameter:reportNames.part:table7-Line2a-c
Slice Nametable7-Line2a-c
Control1..1
Must Supporttrue
168. Parameters.parameter:reportNames.part:table7-Line2a-c.name
Control1..1
Must Supporttrue
Fixed Valuetable7-Line2a-c-Controlling-High-Blood-Pressure-CMS165
170. Parameters.parameter:reportNames.part:table7-Line2a-c.value[x]
Control1..1
Typeboolean
[x] NoteSee Choice of Data Types for further information about how to use [x]
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
172. Parameters.parameter:reportNames.part:table7-Line3a-f
Slice Nametable7-Line3a-f
Control1..1
Must Supporttrue
174. Parameters.parameter:reportNames.part:table7-Line3a-f.name
Control1..1
Must Supporttrue
Fixed Valuetable7-Line3a-f-HbA1c-Poor-Control-CMS122
176. Parameters.parameter:reportNames.part:table7-Line3a-f.value[x]
Control1..1
Typeboolean
[x] NoteSee Choice of Data Types for further information about how to use [x]
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue

Guidance on how to interpret the contents of this table can be found here

0. Parameters
Definition

The UDS+ profile is based on the **Parameters FHIR Resource and establishes the core elements, extensions, vocabularies and value sets for representing the Patients and if they are counted for the various reports.


This resource is a non-persisted resource used to pass information into and back from an operation. It has no other use, and there is no RESTful endpoint associated with it.

ShortUDS Plus Patient Reporting ParametersOperation Request or Response
Comments

The parameters that may be used are defined by the OperationDefinition resource.

Control0..*
Is Modifierfalse
Summaryfalse
2. Parameters.implicitRules
Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

ShortA set of rules under which this content was created
Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

Control0..1
Typeuri
Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
4. Parameters.parameter
Definition

A parameter passed to or received from the operation.

ShortOperation Parameter
Control20..*
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
inv-1: A parameter must have one and only one of (value, resource, part) ((part.exists() and value.empty() and resource.empty()) or (part.empty() and (value.exists() xor resource.exists())))
inv-1: A parameter must have one and only one of (value, resource, part) ((part.exists() and value.empty() and resource.empty()) or (part.empty() and (value.exists() xor resource.exists())))
SlicingThis element introduces a set of slices on Parameters.parameter. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ $this.name
6. Parameters.parameter.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
8. Parameters.parameter.name
Definition

The name of the parameter (reference to the operation definition).

ShortName from the definition
Control1..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
10. Parameters.parameter:patientReference
Slice NamepatientReference
Definition

A parameter passed to or received from the operation.

ShortOperation Parameter
Control10..1*
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
inv-1: A parameter must have one and only one of (value, resource, part) ((part.exists() and value.empty() and resource.empty()) or (part.empty() and (value.exists() xor resource.exists())))
inv-1: A parameter must have one and only one of (value, resource, part) ((part.exists() and value.empty() and resource.empty()) or (part.empty() and (value.exists() xor resource.exists())))
12. Parameters.parameter:patientReference.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
14. Parameters.parameter:patientReference.name
Definition

The name of the parameter (reference to the operation definition).

ShortName from the definition
Control1..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Fixed ValuepatientReference
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
16. Parameters.parameter:patientReference.value[x]
Definition

If the parameter is a data type.

ShortIf parameter is a data type
Control10..1
This element is affected by the following invariants: inv-1
TypeReference, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
[x] NoteSee Choice of Data Types for further information about how to use [x]
Is Modifierfalse
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
18. Parameters.parameter:combinedFundingStreams
Slice NamecombinedFundingStreams
Definition

A parameter passed to or received from the operation.

ShortOperation Parameter
Control10..1*
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
inv-1: A parameter must have one and only one of (value, resource, part) ((part.exists() and value.empty() and resource.empty()) or (part.empty() and (value.exists() xor resource.exists())))
inv-1: A parameter must have one and only one of (value, resource, part) ((part.exists() and value.empty() and resource.empty()) or (part.empty() and (value.exists() xor resource.exists())))
20. Parameters.parameter:combinedFundingStreams.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
22. Parameters.parameter:combinedFundingStreams.name
Definition

The name of the parameter (reference to the operation definition).

ShortName from the definition
Control1..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Fixed ValuecombinedFundingStreams
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
24. Parameters.parameter:combinedFundingStreams.value[x]
Definition

If the parameter is a data type.

ShortIf parameter is a data type
Control10..1
This element is affected by the following invariants: inv-1
Typestring, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
[x] NoteSee Choice of Data Types for further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
26. Parameters.parameter:reportNames
Slice NamereportNames
Definition

A parameter passed to or received from the operation.

ShortOperation Parameter
Control10..1*
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
inv-1: A parameter must have one and only one of (value, resource, part) ((part.exists() and value.empty() and resource.empty()) or (part.empty() and (value.exists() xor resource.exists())))
inv-1: A parameter must have one and only one of (value, resource, part) ((part.exists() and value.empty() and resource.empty()) or (part.empty() and (value.exists() xor resource.exists())))
28. Parameters.parameter:reportNames.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
30. Parameters.parameter:reportNames.name
Definition

The name of the parameter (reference to the operation definition).

ShortName from the definition
Control1..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Fixed ValuereportNames
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
32. Parameters.parameter:reportNames.part
Definition

A named part of a multi-part parameter.

ShortNamed part of a multi-part parameter
Comments

Only one level of nested parameters is allowed.

Control0..*
TypeSee ttp://hl7.org/fhir/StructureDefinition/Parameters#Parameters.parameter
Is Modifierfalse
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
SlicingThis element introduces a set of slices on Parameters.parameter.part. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ $this.name
34. Parameters.parameter:reportNames.part:patientsByZip
Slice NamepatientsByZip
Definition

A named part of a multi-part parameter.

ShortNamed part of a multi-part parameter
Comments

Only one level of nested parameters is allowed.

Control10..1*
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
36. Parameters.parameter:reportNames.part:patientsByZip.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
38. Parameters.parameter:reportNames.part:patientsByZip.name
Definition

The name of the parameter (reference to the operation definition).

ShortName from the definition
Control1..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Fixed ValuepatientsByZip
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
40. Parameters.parameter:reportNames.part:patientsByZip.value[x]
Definition

If the parameter is a data type.

ShortIf parameter is a data type
Control10..1
This element is affected by the following invariants: inv-1
Typeboolean, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, Expression, Signature, unsignedInt, time
[x] NoteSee Choice of Data Types for further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
42. Parameters.parameter:reportNames.part:table3A
Slice Nametable3A
Definition

A named part of a multi-part parameter.

ShortNamed part of a multi-part parameter
Comments

Only one level of nested parameters is allowed.

Control10..1*
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
44. Parameters.parameter:reportNames.part:table3A.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
46. Parameters.parameter:reportNames.part:table3A.name
Definition

The name of the parameter (reference to the operation definition).

ShortName from the definition
Control1..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Fixed Valuetable3A
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
48. Parameters.parameter:reportNames.part:table3A.value[x]
Definition

If the parameter is a data type.

ShortIf parameter is a data type
Control10..1
This element is affected by the following invariants: inv-1
Typeboolean, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, Expression, Signature, unsignedInt, time
[x] NoteSee Choice of Data Types for further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
50. Parameters.parameter:reportNames.part:table3B
Slice Nametable3B
Definition

A named part of a multi-part parameter.

ShortNamed part of a multi-part parameter
Comments

Only one level of nested parameters is allowed.

Control10..1*
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
52. Parameters.parameter:reportNames.part:table3B.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
54. Parameters.parameter:reportNames.part:table3B.name
Definition

The name of the parameter (reference to the operation definition).

ShortName from the definition
Control1..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Fixed Valuetable3B
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
56. Parameters.parameter:reportNames.part:table3B.value[x]
Definition

If the parameter is a data type.

ShortIf parameter is a data type
Control10..1
This element is affected by the following invariants: inv-1
Typeboolean, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, Expression, Signature, unsignedInt, time
[x] NoteSee Choice of Data Types for further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
58. Parameters.parameter:reportNames.part:table4
Slice Nametable4
Definition

A named part of a multi-part parameter.

ShortNamed part of a multi-part parameter
Comments

Only one level of nested parameters is allowed.

Control10..1*
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
60. Parameters.parameter:reportNames.part:table4.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
62. Parameters.parameter:reportNames.part:table4.name
Definition

The name of the parameter (reference to the operation definition).

ShortName from the definition
Control1..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Fixed Valuetable4
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
64. Parameters.parameter:reportNames.part:table4.value[x]
Definition

If the parameter is a data type.

ShortIf parameter is a data type
Control10..1
This element is affected by the following invariants: inv-1
Typeboolean, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, Expression, Signature, unsignedInt, time
[x] NoteSee Choice of Data Types for further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
66. Parameters.parameter:reportNames.part:table6A
Slice Nametable6A
Definition

A named part of a multi-part parameter.

ShortNamed part of a multi-part parameter
Comments

Only one level of nested parameters is allowed.

Control10..1*
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
68. Parameters.parameter:reportNames.part:table6A.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
70. Parameters.parameter:reportNames.part:table6A.name
Definition

The name of the parameter (reference to the operation definition).

ShortName from the definition
Control1..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Fixed Valuetable6A
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
72. Parameters.parameter:reportNames.part:table6A.value[x]
Definition

If the parameter is a data type.

ShortIf parameter is a data type
Control10..1
This element is affected by the following invariants: inv-1
Typeboolean, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, Expression, Signature, unsignedInt, time
[x] NoteSee Choice of Data Types for further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
74. Parameters.parameter:reportNames.part:table6B-Line1-6
Slice Nametable6B-Line1-6
Definition

A named part of a multi-part parameter.

ShortNamed part of a multi-part parameter
Comments

Only one level of nested parameters is allowed.

Control10..1*
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
76. Parameters.parameter:reportNames.part:table6B-Line1-6.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
78. Parameters.parameter:reportNames.part:table6B-Line1-6.name
Definition

The name of the parameter (reference to the operation definition).

ShortName from the definition
Control1..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Fixed Valuetable6B-Line1-6-Age-Of-Prenatal-Care-Patients
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
80. Parameters.parameter:reportNames.part:table6B-Line1-6.value[x]
Definition

If the parameter is a data type.

ShortIf parameter is a data type
Control10..1
This element is affected by the following invariants: inv-1
Typeboolean, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, Expression, Signature, unsignedInt, time
[x] NoteSee Choice of Data Types for further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
82. Parameters.parameter:reportNames.part:table6B-Line7-9
Slice Nametable6B-Line7-9
Definition

A named part of a multi-part parameter.

ShortNamed part of a multi-part parameter
Comments

Only one level of nested parameters is allowed.

Control10..1*
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
84. Parameters.parameter:reportNames.part:table6B-Line7-9.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
86. Parameters.parameter:reportNames.part:table6B-Line7-9.name
Definition

The name of the parameter (reference to the operation definition).

ShortName from the definition
Control1..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Fixed Valuetable6B-Line7-9-Early-Entry-Into-Prenatal-Care
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
88. Parameters.parameter:reportNames.part:table6B-Line7-9.value[x]
Definition

If the parameter is a data type.

ShortIf parameter is a data type
Control10..1
This element is affected by the following invariants: inv-1
Typeboolean, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, Expression, Signature, unsignedInt, time
[x] NoteSee Choice of Data Types for further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
90. Parameters.parameter:reportNames.part:table6B-Line10
Slice Nametable6B-Line10
Definition

A named part of a multi-part parameter.

ShortNamed part of a multi-part parameter
Comments

Only one level of nested parameters is allowed.

Control10..1*
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
92. Parameters.parameter:reportNames.part:table6B-Line10.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
94. Parameters.parameter:reportNames.part:table6B-Line10.name
Definition

The name of the parameter (reference to the operation definition).

ShortName from the definition
Control1..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Fixed Valuetable6B-Line10-Childhood-Immunization-Status-CMS117
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
96. Parameters.parameter:reportNames.part:table6B-Line10.value[x]
Definition

If the parameter is a data type.

ShortIf parameter is a data type
Control10..1
This element is affected by the following invariants: inv-1
Typeboolean, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, Expression, Signature, unsignedInt, time
[x] NoteSee Choice of Data Types for further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
98. Parameters.parameter:reportNames.part:table6B-Line11
Slice Nametable6B-Line11
Definition

A named part of a multi-part parameter.

ShortNamed part of a multi-part parameter
Comments

Only one level of nested parameters is allowed.

Control10..1*
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
100. Parameters.parameter:reportNames.part:table6B-Line11.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
102. Parameters.parameter:reportNames.part:table6B-Line11.name
Definition

The name of the parameter (reference to the operation definition).

ShortName from the definition
Control1..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Fixed Valuetable6B-Line11-Cervical-Cancer-Screening-CMS124
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
104. Parameters.parameter:reportNames.part:table6B-Line11.value[x]
Definition

If the parameter is a data type.

ShortIf parameter is a data type
Control10..1
This element is affected by the following invariants: inv-1
Typeboolean, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, Expression, Signature, unsignedInt, time
[x] NoteSee Choice of Data Types for further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
106. Parameters.parameter:reportNames.part:table6B-Line11a
Slice Nametable6B-Line11a
Definition

A named part of a multi-part parameter.

ShortNamed part of a multi-part parameter
Comments

Only one level of nested parameters is allowed.

Control10..1*
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
108. Parameters.parameter:reportNames.part:table6B-Line11a.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
110. Parameters.parameter:reportNames.part:table6B-Line11a.name
Definition

The name of the parameter (reference to the operation definition).

ShortName from the definition
Control1..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Fixed Valuetable6B-Line11a-Breast-Cancer-Screening-CMS125
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
112. Parameters.parameter:reportNames.part:table6B-Line11a.value[x]
Definition

If the parameter is a data type.

ShortIf parameter is a data type
Control10..1
This element is affected by the following invariants: inv-1
Typeboolean, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, Expression, Signature, unsignedInt, time
[x] NoteSee Choice of Data Types for further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
114. Parameters.parameter:reportNames.part:table6B-Line12
Slice Nametable6B-Line12
Definition

A named part of a multi-part parameter.

ShortNamed part of a multi-part parameter
Comments

Only one level of nested parameters is allowed.

Control10..1*
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
116. Parameters.parameter:reportNames.part:table6B-Line12.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
118. Parameters.parameter:reportNames.part:table6B-Line12.name
Definition

The name of the parameter (reference to the operation definition).

ShortName from the definition
Control1..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Fixed Valuetable6B-Line12-Weight-Assessment-And-Counselling-CMS155
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
120. Parameters.parameter:reportNames.part:table6B-Line12.value[x]
Definition

If the parameter is a data type.

ShortIf parameter is a data type
Control10..1
This element is affected by the following invariants: inv-1
Typeboolean, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, Expression, Signature, unsignedInt, time
[x] NoteSee Choice of Data Types for further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
122. Parameters.parameter:reportNames.part:table6B-Line13
Slice Nametable6B-Line13
Definition

A named part of a multi-part parameter.

ShortNamed part of a multi-part parameter
Comments

Only one level of nested parameters is allowed.

Control10..1*
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
124. Parameters.parameter:reportNames.part:table6B-Line13.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
126. Parameters.parameter:reportNames.part:table6B-Line13.name
Definition

The name of the parameter (reference to the operation definition).

ShortName from the definition
Control1..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Fixed Valuetable6B-Line13-Preventive-Care-And-Screening-BMI-CMS69
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
128. Parameters.parameter:reportNames.part:table6B-Line13.value[x]
Definition

If the parameter is a data type.

ShortIf parameter is a data type
Control10..1
This element is affected by the following invariants: inv-1
Typeboolean, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, Expression, Signature, unsignedInt, time
[x] NoteSee Choice of Data Types for further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
130. Parameters.parameter:reportNames.part:table6B-Line14a
Slice Nametable6B-Line14a
Definition

A named part of a multi-part parameter.

ShortNamed part of a multi-part parameter
Comments

Only one level of nested parameters is allowed.

Control10..1*
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
132. Parameters.parameter:reportNames.part:table6B-Line14a.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
134. Parameters.parameter:reportNames.part:table6B-Line14a.name
Definition

The name of the parameter (reference to the operation definition).

ShortName from the definition
Control1..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Fixed Valuetable6B-Line14a-Preventive-Care-And-Screening-Tobacco-Use-CMS138
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
136. Parameters.parameter:reportNames.part:table6B-Line14a.value[x]
Definition

If the parameter is a data type.

ShortIf parameter is a data type
Control10..1
This element is affected by the following invariants: inv-1
Typeboolean, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, Expression, Signature, unsignedInt, time
[x] NoteSee Choice of Data Types for further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
138. Parameters.parameter:reportNames.part:table6B-Line17a
Slice Nametable6B-Line17a
Definition

A named part of a multi-part parameter.

ShortNamed part of a multi-part parameter
Comments

Only one level of nested parameters is allowed.

Control10..1*
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
140. Parameters.parameter:reportNames.part:table6B-Line17a.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
142. Parameters.parameter:reportNames.part:table6B-Line17a.name
Definition

The name of the parameter (reference to the operation definition).

ShortName from the definition
Control1..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Fixed Valuetable6B-Line17a-Statin-Therapy-CMS347
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
144. Parameters.parameter:reportNames.part:table6B-Line17a.value[x]
Definition

If the parameter is a data type.

ShortIf parameter is a data type
Control10..1
This element is affected by the following invariants: inv-1
Typeboolean, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, Expression, Signature, unsignedInt, time
[x] NoteSee Choice of Data Types for further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
146. Parameters.parameter:reportNames.part:table6B-Line18
Slice Nametable6B-Line18
Definition

A named part of a multi-part parameter.

ShortNamed part of a multi-part parameter
Comments

Only one level of nested parameters is allowed.

Control10..1*
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
148. Parameters.parameter:reportNames.part:table6B-Line18.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
150. Parameters.parameter:reportNames.part:table6B-Line18.name
Definition

The name of the parameter (reference to the operation definition).

ShortName from the definition
Control1..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Fixed Valuetable6B-Line18-Ischmic-Vascular-Disease-CMS164
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
152. Parameters.parameter:reportNames.part:table6B-Line18.value[x]
Definition

If the parameter is a data type.

ShortIf parameter is a data type
Control10..1
This element is affected by the following invariants: inv-1
Typeboolean, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, Expression, Signature, unsignedInt, time
[x] NoteSee Choice of Data Types for further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
154. Parameters.parameter:reportNames.part:table6B-Line19
Slice Nametable6B-Line19
Definition

A named part of a multi-part parameter.

ShortNamed part of a multi-part parameter
Comments

Only one level of nested parameters is allowed.

Control10..1*
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
156. Parameters.parameter:reportNames.part:table6B-Line19.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
158. Parameters.parameter:reportNames.part:table6B-Line19.name
Definition

The name of the parameter (reference to the operation definition).

ShortName from the definition
Control1..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Fixed Valuetable6B-Line19-Colorectal-Cancer-Screening-CMS130
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
160. Parameters.parameter:reportNames.part:table6B-Line19.value[x]
Definition

If the parameter is a data type.

ShortIf parameter is a data type
Control10..1
This element is affected by the following invariants: inv-1
Typeboolean, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, Expression, Signature, unsignedInt, time
[x] NoteSee Choice of Data Types for further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
162. Parameters.parameter:reportNames.part:table6B-Line20
Slice Nametable6B-Line20
Definition

A named part of a multi-part parameter.

ShortNamed part of a multi-part parameter
Comments

Only one level of nested parameters is allowed.

Control10..1*
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
164. Parameters.parameter:reportNames.part:table6B-Line20.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
166. Parameters.parameter:reportNames.part:table6B-Line20.name
Definition

The name of the parameter (reference to the operation definition).

ShortName from the definition
Control1..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Fixed Valuetable6B-Line20-HIV-Linkage-To-Care
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
168. Parameters.parameter:reportNames.part:table6B-Line20.value[x]
Definition

If the parameter is a data type.

ShortIf parameter is a data type
Control10..1
This element is affected by the following invariants: inv-1
Typeboolean, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, Expression, Signature, unsignedInt, time
[x] NoteSee Choice of Data Types for further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
170. Parameters.parameter:reportNames.part:table6B-Line20a
Slice Nametable6B-Line20a
Definition

A named part of a multi-part parameter.

ShortNamed part of a multi-part parameter
Comments

Only one level of nested parameters is allowed.

Control10..1*
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
172. Parameters.parameter:reportNames.part:table6B-Line20a.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
174. Parameters.parameter:reportNames.part:table6B-Line20a.name
Definition

The name of the parameter (reference to the operation definition).

ShortName from the definition
Control1..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Fixed Valuetable6B-Line20a-HIV-Screening-CMS349
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
176. Parameters.parameter:reportNames.part:table6B-Line20a.value[x]
Definition

If the parameter is a data type.

ShortIf parameter is a data type
Control10..1
This element is affected by the following invariants: inv-1
Typeboolean, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, Expression, Signature, unsignedInt, time
[x] NoteSee Choice of Data Types for further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
178. Parameters.parameter:reportNames.part:table6B-Line21
Slice Nametable6B-Line21
Definition

A named part of a multi-part parameter.

ShortNamed part of a multi-part parameter
Comments

Only one level of nested parameters is allowed.

Control10..1*
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
180. Parameters.parameter:reportNames.part:table6B-Line21.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
182. Parameters.parameter:reportNames.part:table6B-Line21.name
Definition

The name of the parameter (reference to the operation definition).

ShortName from the definition
Control1..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Fixed Valuetable6B-Line21-Preventive-Care-And-Screening-For-Depression-CMS2
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
184. Parameters.parameter:reportNames.part:table6B-Line21.value[x]
Definition

If the parameter is a data type.

ShortIf parameter is a data type
Control10..1
This element is affected by the following invariants: inv-1
Typeboolean, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, Expression, Signature, unsignedInt, time
[x] NoteSee Choice of Data Types for further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
186. Parameters.parameter:reportNames.part:table6B-Line21a
Slice Nametable6B-Line21a
Definition

A named part of a multi-part parameter.

ShortNamed part of a multi-part parameter
Comments

Only one level of nested parameters is allowed.

Control10..1*
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
188. Parameters.parameter:reportNames.part:table6B-Line21a.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
190. Parameters.parameter:reportNames.part:table6B-Line21a.name
Definition

The name of the parameter (reference to the operation definition).

ShortName from the definition
Control1..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Fixed Valuetable6B-Line21a-Depression-Remission-At-Twelve-Months-CMS159
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
192. Parameters.parameter:reportNames.part:table6B-Line21a.value[x]
Definition

If the parameter is a data type.

ShortIf parameter is a data type
Control10..1
This element is affected by the following invariants: inv-1
Typeboolean, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, Expression, Signature, unsignedInt, time
[x] NoteSee Choice of Data Types for further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
194. Parameters.parameter:reportNames.part:table6B-Line22
Slice Nametable6B-Line22
Definition

A named part of a multi-part parameter.

ShortNamed part of a multi-part parameter
Comments

Only one level of nested parameters is allowed.

Control10..1*
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
196. Parameters.parameter:reportNames.part:table6B-Line22.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
198. Parameters.parameter:reportNames.part:table6B-Line22.name
Definition

The name of the parameter (reference to the operation definition).

ShortName from the definition
Control1..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Fixed Valuetable6B-Line22-Dental-Sealants-For-Children-CMS277
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
200. Parameters.parameter:reportNames.part:table6B-Line22.value[x]
Definition

If the parameter is a data type.

ShortIf parameter is a data type
Control10..1
This element is affected by the following invariants: inv-1
Typeboolean, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, Expression, Signature, unsignedInt, time
[x] NoteSee Choice of Data Types for further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
202. Parameters.parameter:reportNames.part:table7-Line0
Slice Nametable7-Line0
Definition

A named part of a multi-part parameter.

ShortNamed part of a multi-part parameter
Comments

Only one level of nested parameters is allowed.

Control10..1*
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
204. Parameters.parameter:reportNames.part:table7-Line0.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
206. Parameters.parameter:reportNames.part:table7-Line0.name
Definition

The name of the parameter (reference to the operation definition).

ShortName from the definition
Control1..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Fixed Valuetable7-Line0-HIV-Positive-Pregnant-Patients
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
208. Parameters.parameter:reportNames.part:table7-Line0.value[x]
Definition

If the parameter is a data type.

ShortIf parameter is a data type
Control10..1
This element is affected by the following invariants: inv-1
Typeboolean, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, Expression, Signature, unsignedInt, time
[x] NoteSee Choice of Data Types for further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
210. Parameters.parameter:reportNames.part:table7-Line2
Slice Nametable7-Line2
Definition

A named part of a multi-part parameter.

ShortNamed part of a multi-part parameter
Comments

Only one level of nested parameters is allowed.

Control10..1*
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
212. Parameters.parameter:reportNames.part:table7-Line2.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
214. Parameters.parameter:reportNames.part:table7-Line2.name
Definition

The name of the parameter (reference to the operation definition).

ShortName from the definition
Control1..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Fixed Valuetable7-Line2-Deliveries-Performed-By-Health-Center
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
216. Parameters.parameter:reportNames.part:table7-Line2.value[x]
Definition

If the parameter is a data type.

ShortIf parameter is a data type
Control10..1
This element is affected by the following invariants: inv-1
Typeboolean, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, Expression, Signature, unsignedInt, time
[x] NoteSee Choice of Data Types for further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
218. Parameters.parameter:reportNames.part:table7-Line1a-d
Slice Nametable7-Line1a-d
Definition

A named part of a multi-part parameter.

ShortNamed part of a multi-part parameter
Comments

Only one level of nested parameters is allowed.

Control10..1*
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
220. Parameters.parameter:reportNames.part:table7-Line1a-d.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
222. Parameters.parameter:reportNames.part:table7-Line1a-d.name
Definition

The name of the parameter (reference to the operation definition).

ShortName from the definition
Control1..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Fixed Valuetable7-Line1a-d-Prenatal-Care-Patient-Deliveries
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
224. Parameters.parameter:reportNames.part:table7-Line1a-d.value[x]
Definition

If the parameter is a data type.

ShortIf parameter is a data type
Control10..1
This element is affected by the following invariants: inv-1
Typeboolean, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, Expression, Signature, unsignedInt, time
[x] NoteSee Choice of Data Types for further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
226. Parameters.parameter:reportNames.part:table7-Line2a-c
Slice Nametable7-Line2a-c
Definition

A named part of a multi-part parameter.

ShortNamed part of a multi-part parameter
Comments

Only one level of nested parameters is allowed.

Control10..1*
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
228. Parameters.parameter:reportNames.part:table7-Line2a-c.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
230. Parameters.parameter:reportNames.part:table7-Line2a-c.name
Definition

The name of the parameter (reference to the operation definition).

ShortName from the definition
Control1..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Fixed Valuetable7-Line2a-c-Controlling-High-Blood-Pressure-CMS165
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
232. Parameters.parameter:reportNames.part:table7-Line2a-c.value[x]
Definition

If the parameter is a data type.

ShortIf parameter is a data type
Control10..1
This element is affected by the following invariants: inv-1
Typeboolean, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, Expression, Signature, unsignedInt, time
[x] NoteSee Choice of Data Types for further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
234. Parameters.parameter:reportNames.part:table7-Line3a-f
Slice Nametable7-Line3a-f
Definition

A named part of a multi-part parameter.

ShortNamed part of a multi-part parameter
Comments

Only one level of nested parameters is allowed.

Control10..1*
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
236. Parameters.parameter:reportNames.part:table7-Line3a-f.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
238. Parameters.parameter:reportNames.part:table7-Line3a-f.name
Definition

The name of the parameter (reference to the operation definition).

ShortName from the definition
Control1..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Fixed Valuetable7-Line3a-f-HbA1c-Poor-Control-CMS122
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
240. Parameters.parameter:reportNames.part:table7-Line3a-f.value[x]
Definition

If the parameter is a data type.

ShortIf parameter is a data type
Control10..1
This element is affected by the following invariants: inv-1
Typeboolean, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, Expression, Signature, unsignedInt, time
[x] NoteSee Choice of Data Types for further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

Guidance on how to interpret the contents of this table can be found here

0. Parameters
Definition

The UDS+ profile is based on the **Parameters FHIR Resource and establishes the core elements, extensions, vocabularies and value sets for representing the Patients and if they are counted for the various reports.

ShortUDS Plus Patient Reporting Parameters
Comments

The parameters that may be used are defined by the OperationDefinition resource.

Control0..*
Is Modifierfalse
Summaryfalse
2. Parameters.id
Definition

The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

ShortLogical id of this artifact
Comments

The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

Control0..1
Typeid
Is Modifierfalse
Summarytrue
4. Parameters.meta
Definition

The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

ShortMetadata about the resource
Control0..1
TypeMeta
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
6. Parameters.implicitRules
Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

ShortA set of rules under which this content was created
Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

Control0..1
Typeuri
Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
8. Parameters.language
Definition

The base language in which the resource is written.

ShortLanguage of the resource content
Comments

Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

Control0..1
BindingThe codes SHOULD be taken from CommonLanguages

A human language.

Additional BindingsPurpose
AllLanguagesMax Binding
Typecode
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
10. Parameters.parameter
Definition

A parameter passed to or received from the operation.

ShortOperation Parameter
Control2..*
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
inv-1: A parameter must have one and only one of (value, resource, part) ((part.exists() and value.empty() and resource.empty()) or (part.empty() and (value.exists() xor resource.exists())))
SlicingThis element introduces a set of slices on Parameters.parameter. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ $this.name
12. Parameters.parameter.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
14. Parameters.parameter.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
16. Parameters.parameter.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
18. Parameters.parameter.name
Definition

The name of the parameter (reference to the operation definition).

ShortName from the definition
Control1..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
20. Parameters.parameter.value[x]
Definition

If the parameter is a data type.

ShortIf parameter is a data type
Control0..1
This element is affected by the following invariants: inv-1
TypeChoice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta
[x] NoteSee Choice of Data Types for further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
22. Parameters.parameter.resource
Definition

If the parameter is a whole resource.

ShortIf parameter is a whole resource
Comments

When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods.

Control0..1
This element is affected by the following invariants: inv-1
TypeResource
Is Modifierfalse
Summarytrue
24. Parameters.parameter.part
Definition

A named part of a multi-part parameter.

ShortNamed part of a multi-part parameter
Comments

Only one level of nested parameters is allowed.

Control0..*
TypeSee ttp://hl7.org/fhir/StructureDefinition/Parameters#Parameters.parameter
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
26. Parameters.parameter:patientReference
Slice NamepatientReference
Definition

A parameter passed to or received from the operation.

ShortOperation Parameter
Control1..1
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
inv-1: A parameter must have one and only one of (value, resource, part) ((part.exists() and value.empty() and resource.empty()) or (part.empty() and (value.exists() xor resource.exists())))
28. Parameters.parameter:patientReference.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
30. Parameters.parameter:patientReference.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
32. Parameters.parameter:patientReference.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
34. Parameters.parameter:patientReference.name
Definition

The name of the parameter (reference to the operation definition).

ShortName from the definition
Control1..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Fixed ValuepatientReference
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
36. Parameters.parameter:patientReference.value[x]
Definition

If the parameter is a data type.

ShortIf parameter is a data type
Control1..1
This element is affected by the following invariants: inv-1
TypeReference
[x] NoteSee Choice of Data Types for further information about how to use [x]
Is Modifierfalse
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
38. Parameters.parameter:patientReference.resource
Definition

If the parameter is a whole resource.

ShortIf parameter is a whole resource
Comments

When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods.

Control0..1
This element is affected by the following invariants: inv-1
TypeResource
Is Modifierfalse
Summarytrue
40. Parameters.parameter:patientReference.part
Definition

A named part of a multi-part parameter.

ShortNamed part of a multi-part parameter
Comments

Only one level of nested parameters is allowed.

Control0..*
TypeSee ttp://hl7.org/fhir/StructureDefinition/Parameters#Parameters.parameter
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
42. Parameters.parameter:combinedFundingStreams
Slice NamecombinedFundingStreams
Definition

A parameter passed to or received from the operation.

ShortOperation Parameter
Control1..1
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
inv-1: A parameter must have one and only one of (value, resource, part) ((part.exists() and value.empty() and resource.empty()) or (part.empty() and (value.exists() xor resource.exists())))
44. Parameters.parameter:combinedFundingStreams.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
46. Parameters.parameter:combinedFundingStreams.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
48. Parameters.parameter:combinedFundingStreams.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
50. Parameters.parameter:combinedFundingStreams.name
Definition

The name of the parameter (reference to the operation definition).

ShortName from the definition
Control1..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Fixed ValuecombinedFundingStreams
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
52. Parameters.parameter:combinedFundingStreams.value[x]
Definition

If the parameter is a data type.

ShortIf parameter is a data type
Control1..1
This element is affected by the following invariants: inv-1
Typestring
[x] NoteSee Choice of Data Types for further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
54. Parameters.parameter:combinedFundingStreams.resource
Definition

If the parameter is a whole resource.

ShortIf parameter is a whole resource
Comments

When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods.

Control0..1
This element is affected by the following invariants: inv-1
TypeResource
Is Modifierfalse
Summarytrue
56. Parameters.parameter:combinedFundingStreams.part
Definition

A named part of a multi-part parameter.

ShortNamed part of a multi-part parameter
Comments

Only one level of nested parameters is allowed.

Control0..*
TypeSee ttp://hl7.org/fhir/StructureDefinition/Parameters#Parameters.parameter
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
58. Parameters.parameter:reportNames
Slice NamereportNames
Definition

A parameter passed to or received from the operation.

ShortOperation Parameter
Control1..1
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
inv-1: A parameter must have one and only one of (value, resource, part) ((part.exists() and value.empty() and resource.empty()) or (part.empty() and (value.exists() xor resource.exists())))
60. Parameters.parameter:reportNames.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
62. Parameters.parameter:reportNames.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
64. Parameters.parameter:reportNames.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
66. Parameters.parameter:reportNames.name
Definition

The name of the parameter (reference to the operation definition).

ShortName from the definition
Control1..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Fixed ValuereportNames
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
68. Parameters.parameter:reportNames.value[x]
Definition

If the parameter is a data type.

ShortIf parameter is a data type
Control0..1
This element is affected by the following invariants: inv-1
TypeChoice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta
[x] NoteSee Choice of Data Types for further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
70. Parameters.parameter:reportNames.resource
Definition

If the parameter is a whole resource.

ShortIf parameter is a whole resource
Comments

When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods.

Control0..1
This element is affected by the following invariants: inv-1
TypeResource
Is Modifierfalse
Summarytrue
72. Parameters.parameter:reportNames.part
Definition

A named part of a multi-part parameter.

ShortNamed part of a multi-part parameter
Comments

Only one level of nested parameters is allowed.

Control0..*
TypeSee ttp://hl7.org/fhir/StructureDefinition/Parameters#Parameters.parameter
Is Modifierfalse
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
SlicingThis element introduces a set of slices on Parameters.parameter.part. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ $this.name
74. Parameters.parameter:reportNames.part:patientsByZip
Slice NamepatientsByZip
Definition

A named part of a multi-part parameter.

ShortNamed part of a multi-part parameter
Comments

Only one level of nested parameters is allowed.

Control1..1
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
76. Parameters.parameter:reportNames.part:patientsByZip.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
78. Parameters.parameter:reportNames.part:patientsByZip.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
80. Parameters.parameter:reportNames.part:patientsByZip.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
82. Parameters.parameter:reportNames.part:patientsByZip.name
Definition

The name of the parameter (reference to the operation definition).

ShortName from the definition
Control1..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Fixed ValuepatientsByZip
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
84. Parameters.parameter:reportNames.part:patientsByZip.value[x]
Definition

If the parameter is a data type.

ShortIf parameter is a data type
Control1..1
This element is affected by the following invariants: inv-1
Typeboolean
[x] NoteSee Choice of Data Types for further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
86. Parameters.parameter:reportNames.part:patientsByZip.resource
Definition

If the parameter is a whole resource.

ShortIf parameter is a whole resource
Comments

When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods.

Control0..1
This element is affected by the following invariants: inv-1
TypeResource
Is Modifierfalse
Summarytrue
88. Parameters.parameter:reportNames.part:patientsByZip.part
Definition

A named part of a multi-part parameter.

ShortNamed part of a multi-part parameter
Comments

Only one level of nested parameters is allowed.

Control0..*
TypeSee ttp://hl7.org/fhir/StructureDefinition/Parameters#Parameters.parameter
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
90. Parameters.parameter:reportNames.part:table3A
Slice Nametable3A
Definition

A named part of a multi-part parameter.

ShortNamed part of a multi-part parameter
Comments

Only one level of nested parameters is allowed.

Control1..1
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
92. Parameters.parameter:reportNames.part:table3A.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
94. Parameters.parameter:reportNames.part:table3A.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
96. Parameters.parameter:reportNames.part:table3A.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
98. Parameters.parameter:reportNames.part:table3A.name
Definition

The name of the parameter (reference to the operation definition).

ShortName from the definition
Control1..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Fixed Valuetable3A
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
100. Parameters.parameter:reportNames.part:table3A.value[x]
Definition

If the parameter is a data type.

ShortIf parameter is a data type
Control1..1
This element is affected by the following invariants: inv-1
Typeboolean
[x] NoteSee Choice of Data Types for further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
102. Parameters.parameter:reportNames.part:table3A.resource
Definition

If the parameter is a whole resource.

ShortIf parameter is a whole resource
Comments

When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods.

Control0..1
This element is affected by the following invariants: inv-1
TypeResource
Is Modifierfalse
Summarytrue
104. Parameters.parameter:reportNames.part:table3A.part
Definition

A named part of a multi-part parameter.

ShortNamed part of a multi-part parameter
Comments

Only one level of nested parameters is allowed.

Control0..*
TypeSee ttp://hl7.org/fhir/StructureDefinition/Parameters#Parameters.parameter
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
106. Parameters.parameter:reportNames.part:table3B
Slice Nametable3B
Definition

A named part of a multi-part parameter.

ShortNamed part of a multi-part parameter
Comments

Only one level of nested parameters is allowed.

Control1..1
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
108. Parameters.parameter:reportNames.part:table3B.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
110. Parameters.parameter:reportNames.part:table3B.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
112. Parameters.parameter:reportNames.part:table3B.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
114. Parameters.parameter:reportNames.part:table3B.name
Definition

The name of the parameter (reference to the operation definition).

ShortName from the definition
Control1..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Fixed Valuetable3B
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
116. Parameters.parameter:reportNames.part:table3B.value[x]
Definition

If the parameter is a data type.

ShortIf parameter is a data type
Control1..1
This element is affected by the following invariants: inv-1
Typeboolean
[x] NoteSee Choice of Data Types for further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
118. Parameters.parameter:reportNames.part:table3B.resource
Definition

If the parameter is a whole resource.

ShortIf parameter is a whole resource
Comments

When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods.

Control0..1
This element is affected by the following invariants: inv-1
TypeResource
Is Modifierfalse
Summarytrue
120. Parameters.parameter:reportNames.part:table3B.part
Definition

A named part of a multi-part parameter.

ShortNamed part of a multi-part parameter
Comments

Only one level of nested parameters is allowed.

Control0..*
TypeSee ttp://hl7.org/fhir/StructureDefinition/Parameters#Parameters.parameter
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
122. Parameters.parameter:reportNames.part:table4
Slice Nametable4
Definition

A named part of a multi-part parameter.

ShortNamed part of a multi-part parameter
Comments

Only one level of nested parameters is allowed.

Control1..1
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
124. Parameters.parameter:reportNames.part:table4.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
126. Parameters.parameter:reportNames.part:table4.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
128. Parameters.parameter:reportNames.part:table4.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
130. Parameters.parameter:reportNames.part:table4.name
Definition

The name of the parameter (reference to the operation definition).

ShortName from the definition
Control1..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Fixed Valuetable4
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
132. Parameters.parameter:reportNames.part:table4.value[x]
Definition

If the parameter is a data type.

ShortIf parameter is a data type
Control1..1
This element is affected by the following invariants: inv-1
Typeboolean
[x] NoteSee Choice of Data Types for further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
134. Parameters.parameter:reportNames.part:table4.resource
Definition

If the parameter is a whole resource.

ShortIf parameter is a whole resource
Comments

When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods.

Control0..1
This element is affected by the following invariants: inv-1
TypeResource
Is Modifierfalse
Summarytrue
136. Parameters.parameter:reportNames.part:table4.part
Definition

A named part of a multi-part parameter.

ShortNamed part of a multi-part parameter
Comments

Only one level of nested parameters is allowed.

Control0..*
TypeSee ttp://hl7.org/fhir/StructureDefinition/Parameters#Parameters.parameter
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
138. Parameters.parameter:reportNames.part:table6A
Slice Nametable6A
Definition

A named part of a multi-part parameter.

ShortNamed part of a multi-part parameter
Comments

Only one level of nested parameters is allowed.

Control1..1
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
140. Parameters.parameter:reportNames.part:table6A.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
142. Parameters.parameter:reportNames.part:table6A.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
144. Parameters.parameter:reportNames.part:table6A.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
146. Parameters.parameter:reportNames.part:table6A.name
Definition

The name of the parameter (reference to the operation definition).

ShortName from the definition
Control1..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Fixed Valuetable6A
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
148. Parameters.parameter:reportNames.part:table6A.value[x]
Definition

If the parameter is a data type.

ShortIf parameter is a data type
Control1..1
This element is affected by the following invariants: inv-1
Typeboolean
[x] NoteSee Choice of Data Types for further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
150. Parameters.parameter:reportNames.part:table6A.resource
Definition

If the parameter is a whole resource.

ShortIf parameter is a whole resource
Comments

When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods.

Control0..1
This element is affected by the following invariants: inv-1
TypeResource
Is Modifierfalse
Summarytrue
152. Parameters.parameter:reportNames.part:table6A.part
Definition

A named part of a multi-part parameter.

ShortNamed part of a multi-part parameter
Comments

Only one level of nested parameters is allowed.

Control0..*
TypeSee ttp://hl7.org/fhir/StructureDefinition/Parameters#Parameters.parameter
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
154. Parameters.parameter:reportNames.part:table6B-Line1-6
Slice Nametable6B-Line1-6
Definition

A named part of a multi-part parameter.

ShortNamed part of a multi-part parameter
Comments

Only one level of nested parameters is allowed.

Control1..1
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
156. Parameters.parameter:reportNames.part:table6B-Line1-6.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
158. Parameters.parameter:reportNames.part:table6B-Line1-6.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
160. Parameters.parameter:reportNames.part:table6B-Line1-6.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
162. Parameters.parameter:reportNames.part:table6B-Line1-6.name
Definition

The name of the parameter (reference to the operation definition).

ShortName from the definition
Control1..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Fixed Valuetable6B-Line1-6-Age-Of-Prenatal-Care-Patients
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
164. Parameters.parameter:reportNames.part:table6B-Line1-6.value[x]
Definition

If the parameter is a data type.

ShortIf parameter is a data type
Control1..1
This element is affected by the following invariants: inv-1
Typeboolean
[x] NoteSee Choice of Data Types for further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
166. Parameters.parameter:reportNames.part:table6B-Line1-6.resource
Definition

If the parameter is a whole resource.

ShortIf parameter is a whole resource
Comments

When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods.

Control0..1
This element is affected by the following invariants: inv-1
TypeResource
Is Modifierfalse
Summarytrue
168. Parameters.parameter:reportNames.part:table6B-Line1-6.part
Definition

A named part of a multi-part parameter.

ShortNamed part of a multi-part parameter
Comments

Only one level of nested parameters is allowed.

Control0..*
TypeSee ttp://hl7.org/fhir/StructureDefinition/Parameters#Parameters.parameter
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
170. Parameters.parameter:reportNames.part:table6B-Line7-9
Slice Nametable6B-Line7-9
Definition

A named part of a multi-part parameter.

ShortNamed part of a multi-part parameter
Comments

Only one level of nested parameters is allowed.

Control1..1
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
172. Parameters.parameter:reportNames.part:table6B-Line7-9.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
174. Parameters.parameter:reportNames.part:table6B-Line7-9.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
176. Parameters.parameter:reportNames.part:table6B-Line7-9.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
178. Parameters.parameter:reportNames.part:table6B-Line7-9.name
Definition

The name of the parameter (reference to the operation definition).

ShortName from the definition
Control1..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Fixed Valuetable6B-Line7-9-Early-Entry-Into-Prenatal-Care
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
180. Parameters.parameter:reportNames.part:table6B-Line7-9.value[x]
Definition

If the parameter is a data type.

ShortIf parameter is a data type
Control1..1
This element is affected by the following invariants: inv-1
Typeboolean
[x] NoteSee Choice of Data Types for further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
182. Parameters.parameter:reportNames.part:table6B-Line7-9.resource
Definition

If the parameter is a whole resource.

ShortIf parameter is a whole resource
Comments

When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods.

Control0..1
This element is affected by the following invariants: inv-1
TypeResource
Is Modifierfalse
Summarytrue
184. Parameters.parameter:reportNames.part:table6B-Line7-9.part
Definition

A named part of a multi-part parameter.

ShortNamed part of a multi-part parameter
Comments

Only one level of nested parameters is allowed.

Control0..*
TypeSee ttp://hl7.org/fhir/StructureDefinition/Parameters#Parameters.parameter
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
186. Parameters.parameter:reportNames.part:table6B-Line10
Slice Nametable6B-Line10
Definition

A named part of a multi-part parameter.

ShortNamed part of a multi-part parameter
Comments

Only one level of nested parameters is allowed.

Control1..1
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
188. Parameters.parameter:reportNames.part:table6B-Line10.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
190. Parameters.parameter:reportNames.part:table6B-Line10.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
192. Parameters.parameter:reportNames.part:table6B-Line10.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
194. Parameters.parameter:reportNames.part:table6B-Line10.name
Definition

The name of the parameter (reference to the operation definition).

ShortName from the definition
Control1..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Fixed Valuetable6B-Line10-Childhood-Immunization-Status-CMS117
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
196. Parameters.parameter:reportNames.part:table6B-Line10.value[x]
Definition

If the parameter is a data type.

ShortIf parameter is a data type
Control1..1
This element is affected by the following invariants: inv-1
Typeboolean
[x] NoteSee Choice of Data Types for further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
198. Parameters.parameter:reportNames.part:table6B-Line10.resource
Definition

If the parameter is a whole resource.

ShortIf parameter is a whole resource
Comments

When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods.

Control0..1
This element is affected by the following invariants: inv-1
TypeResource
Is Modifierfalse
Summarytrue
200. Parameters.parameter:reportNames.part:table6B-Line10.part
Definition

A named part of a multi-part parameter.

ShortNamed part of a multi-part parameter
Comments

Only one level of nested parameters is allowed.

Control0..*
TypeSee ttp://hl7.org/fhir/StructureDefinition/Parameters#Parameters.parameter
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
202. Parameters.parameter:reportNames.part:table6B-Line11
Slice Nametable6B-Line11
Definition

A named part of a multi-part parameter.

ShortNamed part of a multi-part parameter
Comments

Only one level of nested parameters is allowed.

Control1..1
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
204. Parameters.parameter:reportNames.part:table6B-Line11.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
206. Parameters.parameter:reportNames.part:table6B-Line11.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
208. Parameters.parameter:reportNames.part:table6B-Line11.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
210. Parameters.parameter:reportNames.part:table6B-Line11.name
Definition

The name of the parameter (reference to the operation definition).

ShortName from the definition
Control1..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Fixed Valuetable6B-Line11-Cervical-Cancer-Screening-CMS124
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
212. Parameters.parameter:reportNames.part:table6B-Line11.value[x]
Definition

If the parameter is a data type.

ShortIf parameter is a data type
Control1..1
This element is affected by the following invariants: inv-1
Typeboolean
[x] NoteSee Choice of Data Types for further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
214. Parameters.parameter:reportNames.part:table6B-Line11.resource
Definition

If the parameter is a whole resource.

ShortIf parameter is a whole resource
Comments

When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods.

Control0..1
This element is affected by the following invariants: inv-1
TypeResource
Is Modifierfalse
Summarytrue
216. Parameters.parameter:reportNames.part:table6B-Line11.part
Definition

A named part of a multi-part parameter.

ShortNamed part of a multi-part parameter
Comments

Only one level of nested parameters is allowed.

Control0..*
TypeSee ttp://hl7.org/fhir/StructureDefinition/Parameters#Parameters.parameter
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
218. Parameters.parameter:reportNames.part:table6B-Line11a
Slice Nametable6B-Line11a
Definition

A named part of a multi-part parameter.

ShortNamed part of a multi-part parameter
Comments

Only one level of nested parameters is allowed.

Control1..1
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
220. Parameters.parameter:reportNames.part:table6B-Line11a.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
222. Parameters.parameter:reportNames.part:table6B-Line11a.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
224. Parameters.parameter:reportNames.part:table6B-Line11a.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
226. Parameters.parameter:reportNames.part:table6B-Line11a.name
Definition

The name of the parameter (reference to the operation definition).

ShortName from the definition
Control1..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Fixed Valuetable6B-Line11a-Breast-Cancer-Screening-CMS125
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
228. Parameters.parameter:reportNames.part:table6B-Line11a.value[x]
Definition

If the parameter is a data type.

ShortIf parameter is a data type
Control1..1
This element is affected by the following invariants: inv-1
Typeboolean
[x] NoteSee Choice of Data Types for further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
230. Parameters.parameter:reportNames.part:table6B-Line11a.resource
Definition

If the parameter is a whole resource.

ShortIf parameter is a whole resource
Comments

When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods.

Control0..1
This element is affected by the following invariants: inv-1
TypeResource
Is Modifierfalse
Summarytrue
232. Parameters.parameter:reportNames.part:table6B-Line11a.part
Definition

A named part of a multi-part parameter.

ShortNamed part of a multi-part parameter
Comments

Only one level of nested parameters is allowed.

Control0..*
TypeSee ttp://hl7.org/fhir/StructureDefinition/Parameters#Parameters.parameter
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
234. Parameters.parameter:reportNames.part:table6B-Line12
Slice Nametable6B-Line12
Definition

A named part of a multi-part parameter.

ShortNamed part of a multi-part parameter
Comments

Only one level of nested parameters is allowed.

Control1..1
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
236. Parameters.parameter:reportNames.part:table6B-Line12.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
238. Parameters.parameter:reportNames.part:table6B-Line12.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
240. Parameters.parameter:reportNames.part:table6B-Line12.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
242. Parameters.parameter:reportNames.part:table6B-Line12.name
Definition

The name of the parameter (reference to the operation definition).

ShortName from the definition
Control1..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Fixed Valuetable6B-Line12-Weight-Assessment-And-Counselling-CMS155
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
244. Parameters.parameter:reportNames.part:table6B-Line12.value[x]
Definition

If the parameter is a data type.

ShortIf parameter is a data type
Control1..1
This element is affected by the following invariants: inv-1
Typeboolean
[x] NoteSee Choice of Data Types for further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
246. Parameters.parameter:reportNames.part:table6B-Line12.resource
Definition

If the parameter is a whole resource.

ShortIf parameter is a whole resource
Comments

When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods.

Control0..1
This element is affected by the following invariants: inv-1
TypeResource
Is Modifierfalse
Summarytrue
248. Parameters.parameter:reportNames.part:table6B-Line12.part
Definition

A named part of a multi-part parameter.

ShortNamed part of a multi-part parameter
Comments

Only one level of nested parameters is allowed.

Control0..*
TypeSee ttp://hl7.org/fhir/StructureDefinition/Parameters#Parameters.parameter
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
250. Parameters.parameter:reportNames.part:table6B-Line13
Slice Nametable6B-Line13
Definition

A named part of a multi-part parameter.

ShortNamed part of a multi-part parameter
Comments

Only one level of nested parameters is allowed.

Control1..1
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
252. Parameters.parameter:reportNames.part:table6B-Line13.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
254. Parameters.parameter:reportNames.part:table6B-Line13.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
256. Parameters.parameter:reportNames.part:table6B-Line13.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
258. Parameters.parameter:reportNames.part:table6B-Line13.name
Definition

The name of the parameter (reference to the operation definition).

ShortName from the definition
Control1..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Fixed Valuetable6B-Line13-Preventive-Care-And-Screening-BMI-CMS69
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
260. Parameters.parameter:reportNames.part:table6B-Line13.value[x]
Definition

If the parameter is a data type.

ShortIf parameter is a data type
Control1..1
This element is affected by the following invariants: inv-1
Typeboolean
[x] NoteSee Choice of Data Types for further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
262. Parameters.parameter:reportNames.part:table6B-Line13.resource
Definition

If the parameter is a whole resource.

ShortIf parameter is a whole resource
Comments

When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods.

Control0..1
This element is affected by the following invariants: inv-1
TypeResource
Is Modifierfalse
Summarytrue
264. Parameters.parameter:reportNames.part:table6B-Line13.part
Definition

A named part of a multi-part parameter.

ShortNamed part of a multi-part parameter
Comments

Only one level of nested parameters is allowed.

Control0..*
TypeSee ttp://hl7.org/fhir/StructureDefinition/Parameters#Parameters.parameter
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
266. Parameters.parameter:reportNames.part:table6B-Line14a
Slice Nametable6B-Line14a
Definition

A named part of a multi-part parameter.

ShortNamed part of a multi-part parameter
Comments

Only one level of nested parameters is allowed.

Control1..1
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
268. Parameters.parameter:reportNames.part:table6B-Line14a.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
270. Parameters.parameter:reportNames.part:table6B-Line14a.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
272. Parameters.parameter:reportNames.part:table6B-Line14a.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
274. Parameters.parameter:reportNames.part:table6B-Line14a.name
Definition

The name of the parameter (reference to the operation definition).

ShortName from the definition
Control1..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Fixed Valuetable6B-Line14a-Preventive-Care-And-Screening-Tobacco-Use-CMS138
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
276. Parameters.parameter:reportNames.part:table6B-Line14a.value[x]
Definition

If the parameter is a data type.

ShortIf parameter is a data type
Control1..1
This element is affected by the following invariants: inv-1
Typeboolean
[x] NoteSee Choice of Data Types for further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
278. Parameters.parameter:reportNames.part:table6B-Line14a.resource
Definition

If the parameter is a whole resource.

ShortIf parameter is a whole resource
Comments

When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods.

Control0..1
This element is affected by the following invariants: inv-1
TypeResource
Is Modifierfalse
Summarytrue
280. Parameters.parameter:reportNames.part:table6B-Line14a.part
Definition

A named part of a multi-part parameter.

ShortNamed part of a multi-part parameter
Comments

Only one level of nested parameters is allowed.

Control0..*
TypeSee ttp://hl7.org/fhir/StructureDefinition/Parameters#Parameters.parameter
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
282. Parameters.parameter:reportNames.part:table6B-Line17a
Slice Nametable6B-Line17a
Definition

A named part of a multi-part parameter.

ShortNamed part of a multi-part parameter
Comments

Only one level of nested parameters is allowed.

Control1..1
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
284. Parameters.parameter:reportNames.part:table6B-Line17a.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
286. Parameters.parameter:reportNames.part:table6B-Line17a.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
288. Parameters.parameter:reportNames.part:table6B-Line17a.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
290. Parameters.parameter:reportNames.part:table6B-Line17a.name
Definition

The name of the parameter (reference to the operation definition).

ShortName from the definition
Control1..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Fixed Valuetable6B-Line17a-Statin-Therapy-CMS347
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
292. Parameters.parameter:reportNames.part:table6B-Line17a.value[x]
Definition

If the parameter is a data type.

ShortIf parameter is a data type
Control1..1
This element is affected by the following invariants: inv-1
Typeboolean
[x] NoteSee Choice of Data Types for further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
294. Parameters.parameter:reportNames.part:table6B-Line17a.resource
Definition

If the parameter is a whole resource.

ShortIf parameter is a whole resource
Comments

When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods.

Control0..1
This element is affected by the following invariants: inv-1
TypeResource
Is Modifierfalse
Summarytrue
296. Parameters.parameter:reportNames.part:table6B-Line17a.part
Definition

A named part of a multi-part parameter.

ShortNamed part of a multi-part parameter
Comments

Only one level of nested parameters is allowed.

Control0..*
TypeSee ttp://hl7.org/fhir/StructureDefinition/Parameters#Parameters.parameter
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
298. Parameters.parameter:reportNames.part:table6B-Line18
Slice Nametable6B-Line18
Definition

A named part of a multi-part parameter.

ShortNamed part of a multi-part parameter
Comments

Only one level of nested parameters is allowed.

Control1..1
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
300. Parameters.parameter:reportNames.part:table6B-Line18.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
302. Parameters.parameter:reportNames.part:table6B-Line18.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
304. Parameters.parameter:reportNames.part:table6B-Line18.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
306. Parameters.parameter:reportNames.part:table6B-Line18.name
Definition

The name of the parameter (reference to the operation definition).

ShortName from the definition
Control1..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Fixed Valuetable6B-Line18-Ischmic-Vascular-Disease-CMS164
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
308. Parameters.parameter:reportNames.part:table6B-Line18.value[x]
Definition

If the parameter is a data type.

ShortIf parameter is a data type
Control1..1
This element is affected by the following invariants: inv-1
Typeboolean
[x] NoteSee Choice of Data Types for further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
310. Parameters.parameter:reportNames.part:table6B-Line18.resource
Definition

If the parameter is a whole resource.

ShortIf parameter is a whole resource
Comments

When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods.

Control0..1
This element is affected by the following invariants: inv-1
TypeResource
Is Modifierfalse
Summarytrue
312. Parameters.parameter:reportNames.part:table6B-Line18.part
Definition

A named part of a multi-part parameter.

ShortNamed part of a multi-part parameter
Comments

Only one level of nested parameters is allowed.

Control0..*
TypeSee ttp://hl7.org/fhir/StructureDefinition/Parameters#Parameters.parameter
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
314. Parameters.parameter:reportNames.part:table6B-Line19
Slice Nametable6B-Line19
Definition

A named part of a multi-part parameter.

ShortNamed part of a multi-part parameter
Comments

Only one level of nested parameters is allowed.

Control1..1
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
316. Parameters.parameter:reportNames.part:table6B-Line19.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
318. Parameters.parameter:reportNames.part:table6B-Line19.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
320. Parameters.parameter:reportNames.part:table6B-Line19.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
322. Parameters.parameter:reportNames.part:table6B-Line19.name
Definition

The name of the parameter (reference to the operation definition).

ShortName from the definition
Control1..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Fixed Valuetable6B-Line19-Colorectal-Cancer-Screening-CMS130
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
324. Parameters.parameter:reportNames.part:table6B-Line19.value[x]
Definition

If the parameter is a data type.

ShortIf parameter is a data type
Control1..1
This element is affected by the following invariants: inv-1
Typeboolean
[x] NoteSee Choice of Data Types for further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
326. Parameters.parameter:reportNames.part:table6B-Line19.resource
Definition

If the parameter is a whole resource.

ShortIf parameter is a whole resource
Comments

When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods.

Control0..1
This element is affected by the following invariants: inv-1
TypeResource
Is Modifierfalse
Summarytrue
328. Parameters.parameter:reportNames.part:table6B-Line19.part
Definition

A named part of a multi-part parameter.

ShortNamed part of a multi-part parameter
Comments

Only one level of nested parameters is allowed.

Control0..*
TypeSee ttp://hl7.org/fhir/StructureDefinition/Parameters#Parameters.parameter
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
330. Parameters.parameter:reportNames.part:table6B-Line20
Slice Nametable6B-Line20
Definition

A named part of a multi-part parameter.

ShortNamed part of a multi-part parameter
Comments

Only one level of nested parameters is allowed.

Control1..1
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
332. Parameters.parameter:reportNames.part:table6B-Line20.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
334. Parameters.parameter:reportNames.part:table6B-Line20.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
336. Parameters.parameter:reportNames.part:table6B-Line20.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
338. Parameters.parameter:reportNames.part:table6B-Line20.name
Definition

The name of the parameter (reference to the operation definition).

ShortName from the definition
Control1..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Fixed Valuetable6B-Line20-HIV-Linkage-To-Care
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
340. Parameters.parameter:reportNames.part:table6B-Line20.value[x]
Definition

If the parameter is a data type.

ShortIf parameter is a data type
Control1..1
This element is affected by the following invariants: inv-1
Typeboolean
[x] NoteSee Choice of Data Types for further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
342. Parameters.parameter:reportNames.part:table6B-Line20.resource
Definition

If the parameter is a whole resource.

ShortIf parameter is a whole resource
Comments

When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods.

Control0..1
This element is affected by the following invariants: inv-1
TypeResource
Is Modifierfalse
Summarytrue
344. Parameters.parameter:reportNames.part:table6B-Line20.part
Definition

A named part of a multi-part parameter.

ShortNamed part of a multi-part parameter
Comments

Only one level of nested parameters is allowed.

Control0..*
TypeSee ttp://hl7.org/fhir/StructureDefinition/Parameters#Parameters.parameter
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
346. Parameters.parameter:reportNames.part:table6B-Line20a
Slice Nametable6B-Line20a
Definition

A named part of a multi-part parameter.

ShortNamed part of a multi-part parameter
Comments

Only one level of nested parameters is allowed.

Control1..1
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
348. Parameters.parameter:reportNames.part:table6B-Line20a.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
350. Parameters.parameter:reportNames.part:table6B-Line20a.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
352. Parameters.parameter:reportNames.part:table6B-Line20a.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
354. Parameters.parameter:reportNames.part:table6B-Line20a.name
Definition

The name of the parameter (reference to the operation definition).

ShortName from the definition
Control1..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Fixed Valuetable6B-Line20a-HIV-Screening-CMS349
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
356. Parameters.parameter:reportNames.part:table6B-Line20a.value[x]
Definition

If the parameter is a data type.

ShortIf parameter is a data type
Control1..1
This element is affected by the following invariants: inv-1
Typeboolean
[x] NoteSee Choice of Data Types for further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
358. Parameters.parameter:reportNames.part:table6B-Line20a.resource
Definition

If the parameter is a whole resource.

ShortIf parameter is a whole resource
Comments

When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods.

Control0..1
This element is affected by the following invariants: inv-1
TypeResource
Is Modifierfalse
Summarytrue
360. Parameters.parameter:reportNames.part:table6B-Line20a.part
Definition

A named part of a multi-part parameter.

ShortNamed part of a multi-part parameter
Comments

Only one level of nested parameters is allowed.

Control0..*
TypeSee ttp://hl7.org/fhir/StructureDefinition/Parameters#Parameters.parameter
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
362. Parameters.parameter:reportNames.part:table6B-Line21
Slice Nametable6B-Line21
Definition

A named part of a multi-part parameter.

ShortNamed part of a multi-part parameter
Comments

Only one level of nested parameters is allowed.

Control1..1
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
364. Parameters.parameter:reportNames.part:table6B-Line21.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
366. Parameters.parameter:reportNames.part:table6B-Line21.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
368. Parameters.parameter:reportNames.part:table6B-Line21.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
370. Parameters.parameter:reportNames.part:table6B-Line21.name
Definition

The name of the parameter (reference to the operation definition).

ShortName from the definition
Control1..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Fixed Valuetable6B-Line21-Preventive-Care-And-Screening-For-Depression-CMS2
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
372. Parameters.parameter:reportNames.part:table6B-Line21.value[x]
Definition

If the parameter is a data type.

ShortIf parameter is a data type
Control1..1
This element is affected by the following invariants: inv-1
Typeboolean
[x] NoteSee Choice of Data Types for further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
374. Parameters.parameter:reportNames.part:table6B-Line21.resource
Definition

If the parameter is a whole resource.

ShortIf parameter is a whole resource
Comments

When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods.

Control0..1
This element is affected by the following invariants: inv-1
TypeResource
Is Modifierfalse
Summarytrue
376. Parameters.parameter:reportNames.part:table6B-Line21.part
Definition

A named part of a multi-part parameter.

ShortNamed part of a multi-part parameter
Comments

Only one level of nested parameters is allowed.

Control0..*
TypeSee ttp://hl7.org/fhir/StructureDefinition/Parameters#Parameters.parameter
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
378. Parameters.parameter:reportNames.part:table6B-Line21a
Slice Nametable6B-Line21a
Definition

A named part of a multi-part parameter.

ShortNamed part of a multi-part parameter
Comments

Only one level of nested parameters is allowed.

Control1..1
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
380. Parameters.parameter:reportNames.part:table6B-Line21a.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
382. Parameters.parameter:reportNames.part:table6B-Line21a.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
384. Parameters.parameter:reportNames.part:table6B-Line21a.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
386. Parameters.parameter:reportNames.part:table6B-Line21a.name
Definition

The name of the parameter (reference to the operation definition).

ShortName from the definition
Control1..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Fixed Valuetable6B-Line21a-Depression-Remission-At-Twelve-Months-CMS159
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
388. Parameters.parameter:reportNames.part:table6B-Line21a.value[x]
Definition

If the parameter is a data type.

ShortIf parameter is a data type
Control1..1
This element is affected by the following invariants: inv-1
Typeboolean
[x] NoteSee Choice of Data Types for further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
390. Parameters.parameter:reportNames.part:table6B-Line21a.resource
Definition

If the parameter is a whole resource.

ShortIf parameter is a whole resource
Comments

When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods.

Control0..1
This element is affected by the following invariants: inv-1
TypeResource
Is Modifierfalse
Summarytrue
392. Parameters.parameter:reportNames.part:table6B-Line21a.part
Definition

A named part of a multi-part parameter.

ShortNamed part of a multi-part parameter
Comments

Only one level of nested parameters is allowed.

Control0..*
TypeSee ttp://hl7.org/fhir/StructureDefinition/Parameters#Parameters.parameter
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
394. Parameters.parameter:reportNames.part:table6B-Line22
Slice Nametable6B-Line22
Definition

A named part of a multi-part parameter.

ShortNamed part of a multi-part parameter
Comments

Only one level of nested parameters is allowed.

Control1..1
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
396. Parameters.parameter:reportNames.part:table6B-Line22.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
398. Parameters.parameter:reportNames.part:table6B-Line22.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
400. Parameters.parameter:reportNames.part:table6B-Line22.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
402. Parameters.parameter:reportNames.part:table6B-Line22.name
Definition

The name of the parameter (reference to the operation definition).

ShortName from the definition
Control1..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Fixed Valuetable6B-Line22-Dental-Sealants-For-Children-CMS277
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
404. Parameters.parameter:reportNames.part:table6B-Line22.value[x]
Definition

If the parameter is a data type.

ShortIf parameter is a data type
Control1..1
This element is affected by the following invariants: inv-1
Typeboolean
[x] NoteSee Choice of Data Types for further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
406. Parameters.parameter:reportNames.part:table6B-Line22.resource
Definition

If the parameter is a whole resource.

ShortIf parameter is a whole resource
Comments

When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods.

Control0..1
This element is affected by the following invariants: inv-1
TypeResource
Is Modifierfalse
Summarytrue
408. Parameters.parameter:reportNames.part:table6B-Line22.part
Definition

A named part of a multi-part parameter.

ShortNamed part of a multi-part parameter
Comments

Only one level of nested parameters is allowed.

Control0..*
TypeSee ttp://hl7.org/fhir/StructureDefinition/Parameters#Parameters.parameter
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
410. Parameters.parameter:reportNames.part:table7-Line0
Slice Nametable7-Line0
Definition

A named part of a multi-part parameter.

ShortNamed part of a multi-part parameter
Comments

Only one level of nested parameters is allowed.

Control1..1
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
412. Parameters.parameter:reportNames.part:table7-Line0.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
414. Parameters.parameter:reportNames.part:table7-Line0.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
416. Parameters.parameter:reportNames.part:table7-Line0.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
418. Parameters.parameter:reportNames.part:table7-Line0.name
Definition

The name of the parameter (reference to the operation definition).

ShortName from the definition
Control1..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Fixed Valuetable7-Line0-HIV-Positive-Pregnant-Patients
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
420. Parameters.parameter:reportNames.part:table7-Line0.value[x]
Definition

If the parameter is a data type.

ShortIf parameter is a data type
Control1..1
This element is affected by the following invariants: inv-1
Typeboolean
[x] NoteSee Choice of Data Types for further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
422. Parameters.parameter:reportNames.part:table7-Line0.resource
Definition

If the parameter is a whole resource.

ShortIf parameter is a whole resource
Comments

When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods.

Control0..1
This element is affected by the following invariants: inv-1
TypeResource
Is Modifierfalse
Summarytrue
424. Parameters.parameter:reportNames.part:table7-Line0.part
Definition

A named part of a multi-part parameter.

ShortNamed part of a multi-part parameter
Comments

Only one level of nested parameters is allowed.

Control0..*
TypeSee ttp://hl7.org/fhir/StructureDefinition/Parameters#Parameters.parameter
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
426. Parameters.parameter:reportNames.part:table7-Line2
Slice Nametable7-Line2
Definition

A named part of a multi-part parameter.

ShortNamed part of a multi-part parameter
Comments

Only one level of nested parameters is allowed.

Control1..1
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
428. Parameters.parameter:reportNames.part:table7-Line2.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
430. Parameters.parameter:reportNames.part:table7-Line2.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
432. Parameters.parameter:reportNames.part:table7-Line2.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
434. Parameters.parameter:reportNames.part:table7-Line2.name
Definition

The name of the parameter (reference to the operation definition).

ShortName from the definition
Control1..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Fixed Valuetable7-Line2-Deliveries-Performed-By-Health-Center
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
436. Parameters.parameter:reportNames.part:table7-Line2.value[x]
Definition

If the parameter is a data type.

ShortIf parameter is a data type
Control1..1
This element is affected by the following invariants: inv-1
Typeboolean
[x] NoteSee Choice of Data Types for further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
438. Parameters.parameter:reportNames.part:table7-Line2.resource
Definition

If the parameter is a whole resource.

ShortIf parameter is a whole resource
Comments

When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods.

Control0..1
This element is affected by the following invariants: inv-1
TypeResource
Is Modifierfalse
Summarytrue
440. Parameters.parameter:reportNames.part:table7-Line2.part
Definition

A named part of a multi-part parameter.

ShortNamed part of a multi-part parameter
Comments

Only one level of nested parameters is allowed.

Control0..*
TypeSee ttp://hl7.org/fhir/StructureDefinition/Parameters#Parameters.parameter
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
442. Parameters.parameter:reportNames.part:table7-Line1a-d
Slice Nametable7-Line1a-d
Definition

A named part of a multi-part parameter.

ShortNamed part of a multi-part parameter
Comments

Only one level of nested parameters is allowed.

Control1..1
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
444. Parameters.parameter:reportNames.part:table7-Line1a-d.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
446. Parameters.parameter:reportNames.part:table7-Line1a-d.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
448. Parameters.parameter:reportNames.part:table7-Line1a-d.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
450. Parameters.parameter:reportNames.part:table7-Line1a-d.name
Definition

The name of the parameter (reference to the operation definition).

ShortName from the definition
Control1..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Fixed Valuetable7-Line1a-d-Prenatal-Care-Patient-Deliveries
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
452. Parameters.parameter:reportNames.part:table7-Line1a-d.value[x]
Definition

If the parameter is a data type.

ShortIf parameter is a data type
Control1..1
This element is affected by the following invariants: inv-1
Typeboolean
[x] NoteSee Choice of Data Types for further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
454. Parameters.parameter:reportNames.part:table7-Line1a-d.resource
Definition

If the parameter is a whole resource.

ShortIf parameter is a whole resource
Comments

When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods.

Control0..1
This element is affected by the following invariants: inv-1
TypeResource
Is Modifierfalse
Summarytrue
456. Parameters.parameter:reportNames.part:table7-Line1a-d.part
Definition

A named part of a multi-part parameter.

ShortNamed part of a multi-part parameter
Comments

Only one level of nested parameters is allowed.

Control0..*
TypeSee ttp://hl7.org/fhir/StructureDefinition/Parameters#Parameters.parameter
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
458. Parameters.parameter:reportNames.part:table7-Line2a-c
Slice Nametable7-Line2a-c
Definition

A named part of a multi-part parameter.

ShortNamed part of a multi-part parameter
Comments

Only one level of nested parameters is allowed.

Control1..1
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
460. Parameters.parameter:reportNames.part:table7-Line2a-c.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
462. Parameters.parameter:reportNames.part:table7-Line2a-c.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
464. Parameters.parameter:reportNames.part:table7-Line2a-c.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
466. Parameters.parameter:reportNames.part:table7-Line2a-c.name
Definition

The name of the parameter (reference to the operation definition).

ShortName from the definition
Control1..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Fixed Valuetable7-Line2a-c-Controlling-High-Blood-Pressure-CMS165
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
468. Parameters.parameter:reportNames.part:table7-Line2a-c.value[x]
Definition

If the parameter is a data type.

ShortIf parameter is a data type
Control1..1
This element is affected by the following invariants: inv-1
Typeboolean
[x] NoteSee Choice of Data Types for further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
470. Parameters.parameter:reportNames.part:table7-Line2a-c.resource
Definition

If the parameter is a whole resource.

ShortIf parameter is a whole resource
Comments

When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods.

Control0..1
This element is affected by the following invariants: inv-1
TypeResource
Is Modifierfalse
Summarytrue
472. Parameters.parameter:reportNames.part:table7-Line2a-c.part
Definition

A named part of a multi-part parameter.

ShortNamed part of a multi-part parameter
Comments

Only one level of nested parameters is allowed.

Control0..*
TypeSee ttp://hl7.org/fhir/StructureDefinition/Parameters#Parameters.parameter
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
474. Parameters.parameter:reportNames.part:table7-Line3a-f
Slice Nametable7-Line3a-f
Definition

A named part of a multi-part parameter.

ShortNamed part of a multi-part parameter
Comments

Only one level of nested parameters is allowed.

Control1..1
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
476. Parameters.parameter:reportNames.part:table7-Line3a-f.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
478. Parameters.parameter:reportNames.part:table7-Line3a-f.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
480. Parameters.parameter:reportNames.part:table7-Line3a-f.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
482. Parameters.parameter:reportNames.part:table7-Line3a-f.name
Definition

The name of the parameter (reference to the operation definition).

ShortName from the definition
Control1..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Fixed Valuetable7-Line3a-f-HbA1c-Poor-Control-CMS122
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
484. Parameters.parameter:reportNames.part:table7-Line3a-f.value[x]
Definition

If the parameter is a data type.

ShortIf parameter is a data type
Control1..1
This element is affected by the following invariants: inv-1
Typeboolean
[x] NoteSee Choice of Data Types for further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
486. Parameters.parameter:reportNames.part:table7-Line3a-f.resource
Definition

If the parameter is a whole resource.

ShortIf parameter is a whole resource
Comments

When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods.

Control0..1
This element is affected by the following invariants: inv-1
TypeResource
Is Modifierfalse
Summarytrue
488. Parameters.parameter:reportNames.part:table7-Line3a-f.part
Definition

A named part of a multi-part parameter.

ShortNamed part of a multi-part parameter
Comments

Only one level of nested parameters is allowed.

Control0..*
TypeSee ttp://hl7.org/fhir/StructureDefinition/Parameters#Parameters.parameter
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))