HRSA 2023 Uniform Data System (UDS) Patient Level Submission (PLS) (UDS+) FHIR IG
1.1.0 - STU1 Release 1.1 - Standard for Trial-Use International flag

This page is part of the HRSA Uniform Data System (UDS) Patient Level Submission (PLS) (UDS+ or uds-plus) FHIR IG (v1.1.0: STU1) based on FHIR (HL7® FHIR® Standard) R4. This is the current published version in its permanent home (it will always be available at this URL). For a full list of available versions, see the Directory of published versions

Resource Profile: UDSPlusPatientReportingParameters - Detailed Descriptions

Page standards status: Trial-use Maturity Level: 2

Definitions for the uds-plus-patient-reporting-parameters resource profile.

Guidance on how to interpret the contents of this table can be found here

0. Parameters
Definition

The UDS+ profile is based on the **Parameters FHIR Resource and establishes the core elements, extensions, vocabularies and value sets for representing the Patients and if they are counted for the various reports.

ShortUDS Plus Patient Reporting Parameters
2. Parameters.parameter
Control2..*
Must Supporttrue
SlicingThis element introduces a set of slices on Parameters.parameter. The slices areUnordered and Open, and can be differentiated using the following discriminators:
  • value @ $this.name
  • 4. Parameters.parameter:patientReference
    Slice NamepatientReference
    Control1..1
    Must Supporttrue
    6. Parameters.parameter:patientReference.name
    Control1..1
    Must Supporttrue
    Fixed ValuepatientReference
    8. Parameters.parameter:patientReference.valueReference
    Control1..1
    TypeReference
    Must Supporttrue
    10. Parameters.parameter:patientReference.valueReference.display
    Control0..0
    Must Supportfalse
    12. Parameters.parameter:combinedFundingStreams
    Slice NamecombinedFundingStreams
    Control1..1
    Must Supporttrue
    14. Parameters.parameter:combinedFundingStreams.name
    Control1..1
    Must Supporttrue
    Fixed ValuecombinedFundingStreams
    16. Parameters.parameter:combinedFundingStreams.value[x]
    Control1..1
    Typestring
    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    18. Parameters.parameter:reportNames
    Slice NamereportNames
    Control1..1
    Must Supporttrue
    20. Parameters.parameter:reportNames.name
    Control1..1
    Must Supporttrue
    Fixed ValuereportNames
    22. Parameters.parameter:reportNames.part
    Control0..*
    Must Supporttrue
    SlicingThis element introduces a set of slices on Parameters.parameter.part. The slices areUnordered and Open, and can be differentiated using the following discriminators:
    • value @ $this.name
    • 24. Parameters.parameter:reportNames.part:patientsByZip
      Slice NamepatientsByZip
      Control1..1
      Must Supporttrue
      26. Parameters.parameter:reportNames.part:patientsByZip.name
      Control1..1
      Must Supporttrue
      Fixed ValuepatientsByZip
      28. Parameters.parameter:reportNames.part:patientsByZip.value[x]
      Control1..1
      Typeboolean
      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supporttrue
      30. Parameters.parameter:reportNames.part:table3A
      Slice Nametable3A
      Control1..1
      Must Supporttrue
      32. Parameters.parameter:reportNames.part:table3A.name
      Control1..1
      Must Supporttrue
      Fixed Valuetable3A
      34. Parameters.parameter:reportNames.part:table3A.value[x]
      Control1..1
      Typeboolean
      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supporttrue
      36. Parameters.parameter:reportNames.part:table3B
      Slice Nametable3B
      Control1..1
      Must Supporttrue
      38. Parameters.parameter:reportNames.part:table3B.name
      Control1..1
      Must Supporttrue
      Fixed Valuetable3B
      40. Parameters.parameter:reportNames.part:table3B.value[x]
      Control1..1
      Typeboolean
      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supporttrue
      42. Parameters.parameter:reportNames.part:table4
      Slice Nametable4
      Control1..1
      Must Supporttrue
      44. Parameters.parameter:reportNames.part:table4.name
      Control1..1
      Must Supporttrue
      Fixed Valuetable4
      46. Parameters.parameter:reportNames.part:table4.value[x]
      Control1..1
      Typeboolean
      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supporttrue
      48. Parameters.parameter:reportNames.part:table6A
      Slice Nametable6A
      Control1..1
      Must Supporttrue
      50. Parameters.parameter:reportNames.part:table6A.name
      Control1..1
      Must Supporttrue
      Fixed Valuetable6A
      52. Parameters.parameter:reportNames.part:table6A.value[x]
      Control1..1
      Typeboolean
      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supporttrue
      54. Parameters.parameter:reportNames.part:table6B-Line1-6
      Slice Nametable6B-Line1-6
      Control1..1
      Must Supporttrue
      56. Parameters.parameter:reportNames.part:table6B-Line1-6.name
      Control1..1
      Must Supporttrue
      Fixed Valuetable6B-Line1-6-Age-Of-Prenatal-Care-Patients
      58. Parameters.parameter:reportNames.part:table6B-Line1-6.value[x]
      Control1..1
      Typeboolean
      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supporttrue
      60. Parameters.parameter:reportNames.part:table6B-Line7-9
      Slice Nametable6B-Line7-9
      Control1..1
      Must Supporttrue
      62. Parameters.parameter:reportNames.part:table6B-Line7-9.name
      Control1..1
      Must Supporttrue
      Fixed Valuetable6B-Line7-9-Early-Entry-Into-Prenatal-Care
      64. Parameters.parameter:reportNames.part:table6B-Line7-9.value[x]
      Control1..1
      Typeboolean
      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supporttrue
      66. Parameters.parameter:reportNames.part:table6B-Line10
      Slice Nametable6B-Line10
      Control1..1
      Must Supporttrue
      68. Parameters.parameter:reportNames.part:table6B-Line10.name
      Control1..1
      Must Supporttrue
      Fixed Valuetable6B-Line10-Childhood-Immunization-Status-CMS117
      70. Parameters.parameter:reportNames.part:table6B-Line10.value[x]
      Control1..1
      Typeboolean
      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supporttrue
      72. Parameters.parameter:reportNames.part:table6B-Line10.part
      Control0..*
      Must Supporttrue
      SlicingThis element introduces a set of slices on Parameters.parameter.part.part. The slices areUnordered and Open, and can be differentiated using the following discriminators:
      • value @ $this.name
      • 74. Parameters.parameter:reportNames.part:table6B-Line10.part:table6B-Line10-den
        Slice Nametable6B-Line10-den
        Control0..1
        Must Supporttrue
        76. Parameters.parameter:reportNames.part:table6B-Line10.part:table6B-Line10-den.name
        Control1..1
        Must Supporttrue
        Fixed Valuetable6B-Line10-Childhood-Immunization-Status-CMS117-den
        78. Parameters.parameter:reportNames.part:table6B-Line10.part:table6B-Line10-den.value[x]
        Control1..1
        Typeboolean
        [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Must Supporttrue
        80. Parameters.parameter:reportNames.part:table6B-Line10.part:table6B-Line10-denexcl
        Slice Nametable6B-Line10-denexcl
        Control0..1
        Must Supporttrue
        82. Parameters.parameter:reportNames.part:table6B-Line10.part:table6B-Line10-denexcl.name
        Control1..1
        Must Supporttrue
        Fixed Valuetable6B-Line10-Childhood-Immunization-Status-CMS117-denexcl
        84. Parameters.parameter:reportNames.part:table6B-Line10.part:table6B-Line10-denexcl.value[x]
        Control1..1
        Typeboolean
        [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Must Supporttrue
        86. Parameters.parameter:reportNames.part:table6B-Line10.part:table6B-Line10-num
        Slice Nametable6B-Line10-num
        Control0..1
        Must Supporttrue
        88. Parameters.parameter:reportNames.part:table6B-Line10.part:table6B-Line10-num.name
        Control1..1
        Must Supporttrue
        Fixed Valuetable6B-Line10-Childhood-Immunization-Status-CMS117-num
        90. Parameters.parameter:reportNames.part:table6B-Line10.part:table6B-Line10-num.value[x]
        Control1..1
        Typeboolean
        [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Must Supporttrue
        92. Parameters.parameter:reportNames.part:table6B-Line11
        Slice Nametable6B-Line11
        Control1..1
        Must Supporttrue
        94. Parameters.parameter:reportNames.part:table6B-Line11.name
        Control1..1
        Must Supporttrue
        Fixed Valuetable6B-Line11-Cervical-Cancer-Screening-CMS124
        96. Parameters.parameter:reportNames.part:table6B-Line11.value[x]
        Control1..1
        Typeboolean
        [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Must Supporttrue
        98. Parameters.parameter:reportNames.part:table6B-Line11.part
        Control0..*
        Must Supporttrue
        SlicingThis element introduces a set of slices on Parameters.parameter.part.part. The slices areUnordered and Open, and can be differentiated using the following discriminators:
        • value @ $this.name
        • 100. Parameters.parameter:reportNames.part:table6B-Line11.part:table6B-Line11-den
          Slice Nametable6B-Line11-den
          Control0..1
          Must Supporttrue
          102. Parameters.parameter:reportNames.part:table6B-Line11.part:table6B-Line11-den.name
          Control1..1
          Must Supporttrue
          Fixed Valuetable6B-Line11-Cervical-Cancer-Screening-CMS124-den
          104. Parameters.parameter:reportNames.part:table6B-Line11.part:table6B-Line11-den.value[x]
          Control1..1
          Typeboolean
          [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Must Supporttrue
          106. Parameters.parameter:reportNames.part:table6B-Line11.part:table6B-Line11-denexcl
          Slice Nametable6B-Line11-denexcl
          Control0..1
          Must Supporttrue
          108. Parameters.parameter:reportNames.part:table6B-Line11.part:table6B-Line11-denexcl.name
          Control1..1
          Must Supporttrue
          Fixed Valuetable6B-Line11-Cervical-Cancer-Screening-CMS124-denexcl
          110. Parameters.parameter:reportNames.part:table6B-Line11.part:table6B-Line11-denexcl.value[x]
          Control1..1
          Typeboolean
          [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Must Supporttrue
          112. Parameters.parameter:reportNames.part:table6B-Line11.part:table6B-Line11-num
          Slice Nametable6B-Line11-num
          Control0..1
          Must Supporttrue
          114. Parameters.parameter:reportNames.part:table6B-Line11.part:table6B-Line11-num.name
          Control1..1
          Must Supporttrue
          Fixed Valuetable6B-Line11-Cervical-Cancer-Screening-CMS124-num
          116. Parameters.parameter:reportNames.part:table6B-Line11.part:table6B-Line11-num.value[x]
          Control1..1
          Typeboolean
          [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Must Supporttrue
          118. Parameters.parameter:reportNames.part:table6B-Line11a
          Slice Nametable6B-Line11a
          Control1..1
          Must Supporttrue
          120. Parameters.parameter:reportNames.part:table6B-Line11a.name
          Control1..1
          Must Supporttrue
          Fixed Valuetable6B-Line11a-Breast-Cancer-Screening-CMS125
          122. Parameters.parameter:reportNames.part:table6B-Line11a.value[x]
          Control1..1
          Typeboolean
          [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Must Supporttrue
          124. Parameters.parameter:reportNames.part:table6B-Line11a.part
          Control0..*
          Must Supporttrue
          SlicingThis element introduces a set of slices on Parameters.parameter.part.part. The slices areUnordered and Open, and can be differentiated using the following discriminators:
          • value @ $this.name
          • 126. Parameters.parameter:reportNames.part:table6B-Line11a.part:table6B-Line11a-den
            Slice Nametable6B-Line11a-den
            Control0..1
            Must Supporttrue
            128. Parameters.parameter:reportNames.part:table6B-Line11a.part:table6B-Line11a-den.name
            Control1..1
            Must Supporttrue
            Fixed Valuetable6B-Line11a-Breast-Cancer-Screening-CMS125-den
            130. Parameters.parameter:reportNames.part:table6B-Line11a.part:table6B-Line11a-den.value[x]
            Control1..1
            Typeboolean
            [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Must Supporttrue
            132. Parameters.parameter:reportNames.part:table6B-Line11a.part:table6B-Line11a-denexcl
            Slice Nametable6B-Line11a-denexcl
            Control0..1
            Must Supporttrue
            134. Parameters.parameter:reportNames.part:table6B-Line11a.part:table6B-Line11a-denexcl.name
            Control1..1
            Must Supporttrue
            Fixed Valuetable6B-Line11a-Breast-Cancer-Screening-CMS125-denexcl
            136. Parameters.parameter:reportNames.part:table6B-Line11a.part:table6B-Line11a-denexcl.value[x]
            Control1..1
            Typeboolean
            [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Must Supporttrue
            138. Parameters.parameter:reportNames.part:table6B-Line11a.part:table6B-Line11a-num
            Slice Nametable6B-Line11a-num
            Control0..1
            Must Supporttrue
            140. Parameters.parameter:reportNames.part:table6B-Line11a.part:table6B-Line11a-num.name
            Control1..1
            Must Supporttrue
            Fixed Valuetable6B-Line11a-Breast-Cancer-Screening-CMS125-num
            142. Parameters.parameter:reportNames.part:table6B-Line11a.part:table6B-Line11a-num.value[x]
            Control1..1
            Typeboolean
            [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Must Supporttrue
            144. Parameters.parameter:reportNames.part:table6B-Line12
            Slice Nametable6B-Line12
            Control1..1
            Must Supporttrue
            146. Parameters.parameter:reportNames.part:table6B-Line12.name
            Control1..1
            Must Supporttrue
            Fixed Valuetable6B-Line12-Weight-Assessment-And-Counselling-CMS155
            148. Parameters.parameter:reportNames.part:table6B-Line12.value[x]
            Control1..1
            Typeboolean
            [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Must Supporttrue
            150. Parameters.parameter:reportNames.part:table6B-Line12.part
            Control0..*
            Must Supporttrue
            SlicingThis element introduces a set of slices on Parameters.parameter.part.part. The slices areUnordered and Open, and can be differentiated using the following discriminators:
            • value @ $this.name
            • 152. Parameters.parameter:reportNames.part:table6B-Line12.part:table6B-Line12-den
              Slice Nametable6B-Line12-den
              Control0..1
              Must Supporttrue
              154. Parameters.parameter:reportNames.part:table6B-Line12.part:table6B-Line12-den.name
              Control1..1
              Must Supporttrue
              Fixed Valuetable6B-Line12-Weight-Assessment-And-Counselling-CMS155-den
              156. Parameters.parameter:reportNames.part:table6B-Line12.part:table6B-Line12-den.value[x]
              Control1..1
              Typeboolean
              [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Must Supporttrue
              158. Parameters.parameter:reportNames.part:table6B-Line12.part:table6B-Line12-denexcl
              Slice Nametable6B-Line12-denexcl
              Control0..1
              Must Supporttrue
              160. Parameters.parameter:reportNames.part:table6B-Line12.part:table6B-Line12-denexcl.name
              Control1..1
              Must Supporttrue
              Fixed Valuetable6B-Line12-Weight-Assessment-And-Counselling-CMS155-denexcl
              162. Parameters.parameter:reportNames.part:table6B-Line12.part:table6B-Line12-denexcl.value[x]
              Control1..1
              Typeboolean
              [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Must Supporttrue
              164. Parameters.parameter:reportNames.part:table6B-Line12.part:table6B-Line12-num
              Slice Nametable6B-Line12-num
              Control0..1
              Must Supporttrue
              166. Parameters.parameter:reportNames.part:table6B-Line12.part:table6B-Line12-num.name
              Control1..1
              Must Supporttrue
              Fixed Valuetable6B-Line12-Weight-Assessment-And-Counselling-CMS155-num
              168. Parameters.parameter:reportNames.part:table6B-Line12.part:table6B-Line12-num.value[x]
              Control1..1
              Typeboolean
              [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Must Supporttrue
              170. Parameters.parameter:reportNames.part:table6B-Line13
              Slice Nametable6B-Line13
              Control1..1
              Must Supporttrue
              172. Parameters.parameter:reportNames.part:table6B-Line13.name
              Control1..1
              Must Supporttrue
              Fixed Valuetable6B-Line13-Preventive-Care-And-Screening-BMI-CMS69
              174. Parameters.parameter:reportNames.part:table6B-Line13.value[x]
              Control1..1
              Typeboolean
              [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Must Supporttrue
              176. Parameters.parameter:reportNames.part:table6B-Line13.part
              Control0..*
              Must Supporttrue
              SlicingThis element introduces a set of slices on Parameters.parameter.part.part. The slices areUnordered and Open, and can be differentiated using the following discriminators:
              • value @ $this.name
              • 178. Parameters.parameter:reportNames.part:table6B-Line13.part:table6B-Line13-den
                Slice Nametable6B-Line13-den
                Control0..1
                Must Supporttrue
                180. Parameters.parameter:reportNames.part:table6B-Line13.part:table6B-Line13-den.name
                Control1..1
                Must Supporttrue
                Fixed Valuetable6B-Line13-Preventive-Care-And-Screening-BMI-CMS69-den
                182. Parameters.parameter:reportNames.part:table6B-Line13.part:table6B-Line13-den.value[x]
                Control1..1
                Typeboolean
                [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                Must Supporttrue
                184. Parameters.parameter:reportNames.part:table6B-Line13.part:table6B-Line13-denexcl
                Slice Nametable6B-Line13-denexcl
                Control0..1
                Must Supporttrue
                186. Parameters.parameter:reportNames.part:table6B-Line13.part:table6B-Line13-denexcl.name
                Control1..1
                Must Supporttrue
                Fixed Valuetable6B-Line13-Preventive-Care-And-Screening-BMI-CMS69-denexcl
                188. Parameters.parameter:reportNames.part:table6B-Line13.part:table6B-Line13-denexcl.value[x]
                Control1..1
                Typeboolean
                [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                Must Supporttrue
                190. Parameters.parameter:reportNames.part:table6B-Line13.part:table6B-Line13-denexp
                Slice Nametable6B-Line13-denexp
                Control0..1
                Must Supporttrue
                192. Parameters.parameter:reportNames.part:table6B-Line13.part:table6B-Line13-denexp.name
                Control1..1
                Must Supporttrue
                Fixed Valuetable6B-Line13-Preventive-Care-And-Screening-BMI-CMS69-denexp
                194. Parameters.parameter:reportNames.part:table6B-Line13.part:table6B-Line13-denexp.value[x]
                Control1..1
                Typeboolean
                [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                Must Supporttrue
                196. Parameters.parameter:reportNames.part:table6B-Line13.part:table6B-Line13-num
                Slice Nametable6B-Line13-num
                Control0..1
                Must Supporttrue
                198. Parameters.parameter:reportNames.part:table6B-Line13.part:table6B-Line13-num.name
                Control1..1
                Must Supporttrue
                Fixed Valuetable6B-Line13-Preventive-Care-And-Screening-BMI-CMS69-num
                200. Parameters.parameter:reportNames.part:table6B-Line13.part:table6B-Line13-num.value[x]
                Control1..1
                Typeboolean
                [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                Must Supporttrue
                202. Parameters.parameter:reportNames.part:table6B-Line14a
                Slice Nametable6B-Line14a
                Control1..1
                Must Supporttrue
                204. Parameters.parameter:reportNames.part:table6B-Line14a.name
                Control1..1
                Must Supporttrue
                Fixed Valuetable6B-Line14a-Preventive-Care-And-Screening-Tobacco-Use-CMS138
                206. Parameters.parameter:reportNames.part:table6B-Line14a.value[x]
                Control1..1
                Typeboolean
                [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                Must Supporttrue
                208. Parameters.parameter:reportNames.part:table6B-Line14a.part
                Control0..*
                Must Supporttrue
                SlicingThis element introduces a set of slices on Parameters.parameter.part.part. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                • value @ $this.name
                • 210. Parameters.parameter:reportNames.part:table6B-Line14a.part:table6B-Line14a-den
                  Slice Nametable6B-Line14a-den
                  Control0..1
                  Must Supporttrue
                  212. Parameters.parameter:reportNames.part:table6B-Line14a.part:table6B-Line14a-den.name
                  Control1..1
                  Must Supporttrue
                  Fixed Valuetable6B-Line14a-Preventive-Care-And-Screening-Tobacco-Use-CMS138-den
                  214. Parameters.parameter:reportNames.part:table6B-Line14a.part:table6B-Line14a-den.value[x]
                  Control1..1
                  Typeboolean
                  [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Must Supporttrue
                  216. Parameters.parameter:reportNames.part:table6B-Line14a.part:table6B-Line14a-denexcl
                  Slice Nametable6B-Line14a-denexcl
                  Control0..1
                  Must Supporttrue
                  218. Parameters.parameter:reportNames.part:table6B-Line14a.part:table6B-Line14a-denexcl.name
                  Control1..1
                  Must Supporttrue
                  Fixed Valuetable6B-Line14a-Preventive-Care-And-Screening-Tobacco-Use-CMS138-denexcl
                  220. Parameters.parameter:reportNames.part:table6B-Line14a.part:table6B-Line14a-denexcl.value[x]
                  Control1..1
                  Typeboolean
                  [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Must Supporttrue
                  222. Parameters.parameter:reportNames.part:table6B-Line14a.part:table6B-Line14a-num
                  Slice Nametable6B-Line14a-num
                  Control0..1
                  Must Supporttrue
                  224. Parameters.parameter:reportNames.part:table6B-Line14a.part:table6B-Line14a-num.name
                  Control1..1
                  Must Supporttrue
                  Fixed Valuetable6B-Line14a-Preventive-Care-And-Screening-Tobacco-Use-CMS138-num
                  226. Parameters.parameter:reportNames.part:table6B-Line14a.part:table6B-Line14a-num.value[x]
                  Control1..1
                  Typeboolean
                  [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Must Supporttrue
                  228. Parameters.parameter:reportNames.part:table6B-Line17a
                  Slice Nametable6B-Line17a
                  Control1..1
                  Must Supporttrue
                  230. Parameters.parameter:reportNames.part:table6B-Line17a.name
                  Control1..1
                  Must Supporttrue
                  Fixed Valuetable6B-Line17a-Statin-Therapy-CMS347
                  232. Parameters.parameter:reportNames.part:table6B-Line17a.value[x]
                  Control1..1
                  Typeboolean
                  [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Must Supporttrue
                  234. Parameters.parameter:reportNames.part:table6B-Line17a.part
                  Control0..*
                  Must Supporttrue
                  SlicingThis element introduces a set of slices on Parameters.parameter.part.part. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                  • value @ $this.name
                  • 236. Parameters.parameter:reportNames.part:table6B-Line17a.part:table6B-Line17a-den
                    Slice Nametable6B-Line17a-den
                    Control0..1
                    Must Supporttrue
                    238. Parameters.parameter:reportNames.part:table6B-Line17a.part:table6B-Line17a-den.name
                    Control1..1
                    Must Supporttrue
                    Fixed Valuetable6B-Line17a-Statin-Therapy-CMS347-den
                    240. Parameters.parameter:reportNames.part:table6B-Line17a.part:table6B-Line17a-den.value[x]
                    Control1..1
                    Typeboolean
                    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                    Must Supporttrue
                    242. Parameters.parameter:reportNames.part:table6B-Line17a.part:table6B-Line17a-denexcl
                    Slice Nametable6B-Line17a-denexcl
                    Control0..1
                    Must Supporttrue
                    244. Parameters.parameter:reportNames.part:table6B-Line17a.part:table6B-Line17a-denexcl.name
                    Control1..1
                    Must Supporttrue
                    Fixed Valuetable6B-Line17a-Statin-Therapy-CMS347-denexcl
                    246. Parameters.parameter:reportNames.part:table6B-Line17a.part:table6B-Line17a-denexcl.value[x]
                    Control1..1
                    Typeboolean
                    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                    Must Supporttrue
                    248. Parameters.parameter:reportNames.part:table6B-Line17a.part:table6B-Line17a-denexp
                    Slice Nametable6B-Line17a-denexp
                    Control0..1
                    Must Supporttrue
                    250. Parameters.parameter:reportNames.part:table6B-Line17a.part:table6B-Line17a-denexp.name
                    Control1..1
                    Must Supporttrue
                    Fixed Valuetable6B-Line17a-Statin-Therapy-CMS347-denexp
                    252. Parameters.parameter:reportNames.part:table6B-Line17a.part:table6B-Line17a-denexp.value[x]
                    Control1..1
                    Typeboolean
                    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                    Must Supporttrue
                    254. Parameters.parameter:reportNames.part:table6B-Line17a.part:table6B-Line17a-num
                    Slice Nametable6B-Line17a-num
                    Control0..1
                    Must Supporttrue
                    256. Parameters.parameter:reportNames.part:table6B-Line17a.part:table6B-Line17a-num.name
                    Control1..1
                    Must Supporttrue
                    Fixed Valuetable6B-Line17a-Statin-Therapy-CMS347-num
                    258. Parameters.parameter:reportNames.part:table6B-Line17a.part:table6B-Line17a-num.value[x]
                    Control1..1
                    Typeboolean
                    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                    Must Supporttrue
                    260. Parameters.parameter:reportNames.part:table6B-Line18
                    Slice Nametable6B-Line18
                    Control1..1
                    Must Supporttrue
                    262. Parameters.parameter:reportNames.part:table6B-Line18.name
                    Control1..1
                    Must Supporttrue
                    Fixed Valuetable6B-Line18-Ischmic-Vascular-Disease-CMS164
                    264. Parameters.parameter:reportNames.part:table6B-Line18.value[x]
                    Control1..1
                    Typeboolean
                    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                    Must Supporttrue
                    266. Parameters.parameter:reportNames.part:table6B-Line18.part
                    Control0..*
                    Must Supporttrue
                    SlicingThis element introduces a set of slices on Parameters.parameter.part.part. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                    • value @ $this.name
                    • 268. Parameters.parameter:reportNames.part:table6B-Line18.part:table6B-Line18-den
                      Slice Nametable6B-Line18-den
                      Control0..1
                      Must Supporttrue
                      270. Parameters.parameter:reportNames.part:table6B-Line18.part:table6B-Line18-den.name
                      Control1..1
                      Must Supporttrue
                      Fixed Valuetable6B-Line18-Ischmic-Vascular-Disease-CMS164-den
                      272. Parameters.parameter:reportNames.part:table6B-Line18.part:table6B-Line18-den.value[x]
                      Control1..1
                      Typeboolean
                      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      Must Supporttrue
                      274. Parameters.parameter:reportNames.part:table6B-Line18.part:table6B-Line18-denexcl
                      Slice Nametable6B-Line18-denexcl
                      Control0..1
                      Must Supporttrue
                      276. Parameters.parameter:reportNames.part:table6B-Line18.part:table6B-Line18-denexcl.name
                      Control1..1
                      Must Supporttrue
                      Fixed Valuetable6B-Line18-Ischmic-Vascular-Disease-CMS164-denexcl
                      278. Parameters.parameter:reportNames.part:table6B-Line18.part:table6B-Line18-denexcl.value[x]
                      Control1..1
                      Typeboolean
                      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      Must Supporttrue
                      280. Parameters.parameter:reportNames.part:table6B-Line18.part:table6B-Line18-num
                      Slice Nametable6B-Line18-num
                      Control0..1
                      Must Supporttrue
                      282. Parameters.parameter:reportNames.part:table6B-Line18.part:table6B-Line18-num.name
                      Control1..1
                      Must Supporttrue
                      Fixed Valuetable6B-Line18-Ischmic-Vascular-Disease-CMS164-num
                      284. Parameters.parameter:reportNames.part:table6B-Line18.part:table6B-Line18-num.value[x]
                      Control1..1
                      Typeboolean
                      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      Must Supporttrue
                      286. Parameters.parameter:reportNames.part:table6B-Line19
                      Slice Nametable6B-Line19
                      Control1..1
                      Must Supporttrue
                      288. Parameters.parameter:reportNames.part:table6B-Line19.name
                      Control1..1
                      Must Supporttrue
                      Fixed Valuetable6B-Line19-Colorectal-Cancer-Screening-CMS130
                      290. Parameters.parameter:reportNames.part:table6B-Line19.value[x]
                      Control1..1
                      Typeboolean
                      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      Must Supporttrue
                      292. Parameters.parameter:reportNames.part:table6B-Line19.part
                      Control0..*
                      Must Supporttrue
                      SlicingThis element introduces a set of slices on Parameters.parameter.part.part. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                      • value @ $this.name
                      • 294. Parameters.parameter:reportNames.part:table6B-Line19.part:table6B-Line19-den
                        Slice Nametable6B-Line19-den
                        Control0..1
                        Must Supporttrue
                        296. Parameters.parameter:reportNames.part:table6B-Line19.part:table6B-Line19-den.name
                        Control1..1
                        Must Supporttrue
                        Fixed Valuetable6B-Line19-Colorectal-Cancer-Screening-CMS130-den
                        298. Parameters.parameter:reportNames.part:table6B-Line19.part:table6B-Line19-den.value[x]
                        Control1..1
                        Typeboolean
                        [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                        Must Supporttrue
                        300. Parameters.parameter:reportNames.part:table6B-Line19.part:table6B-Line19-denexcl
                        Slice Nametable6B-Line19-denexcl
                        Control0..1
                        Must Supporttrue
                        302. Parameters.parameter:reportNames.part:table6B-Line19.part:table6B-Line19-denexcl.name
                        Control1..1
                        Must Supporttrue
                        Fixed Valuetable6B-Line19-Colorectal-Cancer-Screening-CMS130-denexcl
                        304. Parameters.parameter:reportNames.part:table6B-Line19.part:table6B-Line19-denexcl.value[x]
                        Control1..1
                        Typeboolean
                        [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                        Must Supporttrue
                        306. Parameters.parameter:reportNames.part:table6B-Line19.part:table6B-Line19-num
                        Slice Nametable6B-Line19-num
                        Control0..1
                        Must Supporttrue
                        308. Parameters.parameter:reportNames.part:table6B-Line19.part:table6B-Line19-num.name
                        Control1..1
                        Must Supporttrue
                        Fixed Valuetable6B-Line19-Colorectal-Cancer-Screening-CMS130-num
                        310. Parameters.parameter:reportNames.part:table6B-Line19.part:table6B-Line19-num.value[x]
                        Control1..1
                        Typeboolean
                        [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                        Must Supporttrue
                        312. Parameters.parameter:reportNames.part:table6B-Line20
                        Slice Nametable6B-Line20
                        Control1..1
                        Must Supporttrue
                        314. Parameters.parameter:reportNames.part:table6B-Line20.name
                        Control1..1
                        Must Supporttrue
                        Fixed Valuetable6B-Line20-HIV-Linkage-To-Care
                        316. Parameters.parameter:reportNames.part:table6B-Line20.value[x]
                        Control1..1
                        Typeboolean
                        [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                        Must Supporttrue
                        318. Parameters.parameter:reportNames.part:table6B-Line20.part
                        Control0..*
                        Must Supporttrue
                        SlicingThis element introduces a set of slices on Parameters.parameter.part.part. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                        • value @ $this.name
                        • 320. Parameters.parameter:reportNames.part:table6B-Line20.part:table6B-Line20-den
                          Slice Nametable6B-Line20-den
                          Control0..1
                          Must Supporttrue
                          322. Parameters.parameter:reportNames.part:table6B-Line20.part:table6B-Line20-den.name
                          Control1..1
                          Must Supporttrue
                          Fixed Valuetable6B-Line20-HIV-Linkage-To-Care-den
                          324. Parameters.parameter:reportNames.part:table6B-Line20.part:table6B-Line20-den.value[x]
                          Control1..1
                          Typeboolean
                          [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                          Must Supporttrue
                          326. Parameters.parameter:reportNames.part:table6B-Line20.part:table6B-Line20-denexcl
                          Slice Nametable6B-Line20-denexcl
                          Control0..1
                          Must Supporttrue
                          328. Parameters.parameter:reportNames.part:table6B-Line20.part:table6B-Line20-denexcl.name
                          Control1..1
                          Must Supporttrue
                          Fixed Valuetable6B-Line20-HIV-Linkage-To-Care-denexcl
                          330. Parameters.parameter:reportNames.part:table6B-Line20.part:table6B-Line20-denexcl.value[x]
                          Control1..1
                          Typeboolean
                          [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                          Must Supporttrue
                          332. Parameters.parameter:reportNames.part:table6B-Line20.part:table6B-Line20-num
                          Slice Nametable6B-Line20-num
                          Control0..1
                          Must Supporttrue
                          334. Parameters.parameter:reportNames.part:table6B-Line20.part:table6B-Line20-num.name
                          Control1..1
                          Must Supporttrue
                          Fixed Valuetable6B-Line20-HIV-Linkage-To-Care-num
                          336. Parameters.parameter:reportNames.part:table6B-Line20.part:table6B-Line20-num.value[x]
                          Control1..1
                          Typeboolean
                          [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                          Must Supporttrue
                          338. Parameters.parameter:reportNames.part:table6B-Line20a
                          Slice Nametable6B-Line20a
                          Control1..1
                          Must Supporttrue
                          340. Parameters.parameter:reportNames.part:table6B-Line20a.name
                          Control1..1
                          Must Supporttrue
                          Fixed Valuetable6B-Line20a-HIV-Screening-CMS349
                          342. Parameters.parameter:reportNames.part:table6B-Line20a.value[x]
                          Control1..1
                          Typeboolean
                          [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                          Must Supporttrue
                          344. Parameters.parameter:reportNames.part:table6B-Line20a.part
                          Control0..*
                          Must Supporttrue
                          SlicingThis element introduces a set of slices on Parameters.parameter.part.part. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                          • value @ $this.name
                          • 346. Parameters.parameter:reportNames.part:table6B-Line20a.part:table6B-Line20a-den
                            Slice Nametable6B-Line20a-den
                            Control0..1
                            Must Supporttrue
                            348. Parameters.parameter:reportNames.part:table6B-Line20a.part:table6B-Line20a-den.name
                            Control1..1
                            Must Supporttrue
                            Fixed Valuetable6B-Line20a-HIV-Screening-CMS349-den
                            350. Parameters.parameter:reportNames.part:table6B-Line20a.part:table6B-Line20a-den.value[x]
                            Control1..1
                            Typeboolean
                            [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                            Must Supporttrue
                            352. Parameters.parameter:reportNames.part:table6B-Line20a.part:table6B-Line20a-denexcl
                            Slice Nametable6B-Line20a-denexcl
                            Control0..1
                            Must Supporttrue
                            354. Parameters.parameter:reportNames.part:table6B-Line20a.part:table6B-Line20a-denexcl.name
                            Control1..1
                            Must Supporttrue
                            Fixed Valuetable6B-Line20a-HIV-Screening-CMS349-denexcl
                            356. Parameters.parameter:reportNames.part:table6B-Line20a.part:table6B-Line20a-denexcl.value[x]
                            Control1..1
                            Typeboolean
                            [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                            Must Supporttrue
                            358. Parameters.parameter:reportNames.part:table6B-Line20a.part:table6B-Line20a-num
                            Slice Nametable6B-Line20a-num
                            Control0..1
                            Must Supporttrue
                            360. Parameters.parameter:reportNames.part:table6B-Line20a.part:table6B-Line20a-num.name
                            Control1..1
                            Must Supporttrue
                            Fixed Valuetable6B-Line20a-HIV-Screening-CMS349-num
                            362. Parameters.parameter:reportNames.part:table6B-Line20a.part:table6B-Line20a-num.value[x]
                            Control1..1
                            Typeboolean
                            [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                            Must Supporttrue
                            364. Parameters.parameter:reportNames.part:table6B-Line21
                            Slice Nametable6B-Line21
                            Control1..1
                            Must Supporttrue
                            366. Parameters.parameter:reportNames.part:table6B-Line21.name
                            Control1..1
                            Must Supporttrue
                            Fixed Valuetable6B-Line21-Preventive-Care-And-Screening-For-Depression-CMS2
                            368. Parameters.parameter:reportNames.part:table6B-Line21.value[x]
                            Control1..1
                            Typeboolean
                            [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                            Must Supporttrue
                            370. Parameters.parameter:reportNames.part:table6B-Line21.part
                            Control0..*
                            Must Supporttrue
                            SlicingThis element introduces a set of slices on Parameters.parameter.part.part. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                            • value @ $this.name
                            • 372. Parameters.parameter:reportNames.part:table6B-Line21.part:table6B-Line21-den
                              Slice Nametable6B-Line21-den
                              Control0..1
                              Must Supporttrue
                              374. Parameters.parameter:reportNames.part:table6B-Line21.part:table6B-Line21-den.name
                              Control1..1
                              Must Supporttrue
                              Fixed Valuetable6B-Line20a-HIV-Screening-CMS349-den
                              376. Parameters.parameter:reportNames.part:table6B-Line21.part:table6B-Line21-den.value[x]
                              Control1..1
                              Typeboolean
                              [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                              Must Supporttrue
                              378. Parameters.parameter:reportNames.part:table6B-Line21.part:table6B-Line21-denexcl
                              Slice Nametable6B-Line21-denexcl
                              Control0..1
                              Must Supporttrue
                              380. Parameters.parameter:reportNames.part:table6B-Line21.part:table6B-Line21-denexcl.name
                              Control1..1
                              Must Supporttrue
                              Fixed Valuetable6B-Line20a-HIV-Screening-CMS349-denexcl
                              382. Parameters.parameter:reportNames.part:table6B-Line21.part:table6B-Line21-denexcl.value[x]
                              Control1..1
                              Typeboolean
                              [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                              Must Supporttrue
                              384. Parameters.parameter:reportNames.part:table6B-Line21.part:table6B-Line21-num
                              Slice Nametable6B-Line21-num
                              Control0..1
                              Must Supporttrue
                              386. Parameters.parameter:reportNames.part:table6B-Line21.part:table6B-Line21-num.name
                              Control1..1
                              Must Supporttrue
                              Fixed Valuetable6B-Line20a-HIV-Screening-CMS349-num
                              388. Parameters.parameter:reportNames.part:table6B-Line21.part:table6B-Line21-num.value[x]
                              Control1..1
                              Typeboolean
                              [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                              Must Supporttrue
                              390. Parameters.parameter:reportNames.part:table6B-Line21a
                              Slice Nametable6B-Line21a
                              Control1..1
                              Must Supporttrue
                              392. Parameters.parameter:reportNames.part:table6B-Line21a.name
                              Control1..1
                              Must Supporttrue
                              Fixed Valuetable6B-Line21a-Depression-Remission-At-Twelve-Months-CMS159
                              394. Parameters.parameter:reportNames.part:table6B-Line21a.value[x]
                              Control1..1
                              Typeboolean
                              [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                              Must Supporttrue
                              396. Parameters.parameter:reportNames.part:table6B-Line22
                              Slice Nametable6B-Line22
                              Control1..1
                              Must Supporttrue
                              398. Parameters.parameter:reportNames.part:table6B-Line22.name
                              Control1..1
                              Must Supporttrue
                              Fixed Valuetable6B-Line22-Dental-Sealants-For-Children-CMS277
                              400. Parameters.parameter:reportNames.part:table6B-Line22.value[x]
                              Control1..1
                              Typeboolean
                              [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                              Must Supporttrue
                              402. Parameters.parameter:reportNames.part:table7-Line0
                              Slice Nametable7-Line0
                              Control1..1
                              Must Supporttrue
                              404. Parameters.parameter:reportNames.part:table7-Line0.name
                              Control1..1
                              Must Supporttrue
                              Fixed Valuetable7-Line0-HIV-Positive-Pregnant-Patients
                              406. Parameters.parameter:reportNames.part:table7-Line0.value[x]
                              Control1..1
                              Typeboolean
                              [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                              Must Supporttrue
                              408. Parameters.parameter:reportNames.part:table7-Line2
                              Slice Nametable7-Line2
                              Control1..1
                              Must Supporttrue
                              410. Parameters.parameter:reportNames.part:table7-Line2.name
                              Control1..1
                              Must Supporttrue
                              Fixed Valuetable7-Line2-Deliveries-Performed-By-Health-Center
                              412. Parameters.parameter:reportNames.part:table7-Line2.value[x]
                              Control1..1
                              Typeboolean
                              [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                              Must Supporttrue
                              414. Parameters.parameter:reportNames.part:table7-Line1a-d
                              Slice Nametable7-Line1a-d
                              Control1..1
                              Must Supporttrue
                              416. Parameters.parameter:reportNames.part:table7-Line1a-d.name
                              Control1..1
                              Must Supporttrue
                              Fixed Valuetable7-Line1a-d-Prenatal-Care-Patient-Deliveries
                              418. Parameters.parameter:reportNames.part:table7-Line1a-d.value[x]
                              Control1..1
                              Typeboolean
                              [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                              Must Supporttrue
                              420. Parameters.parameter:reportNames.part:table7-Line2a-c
                              Slice Nametable7-Line2a-c
                              Control1..1
                              Must Supporttrue
                              422. Parameters.parameter:reportNames.part:table7-Line2a-c.name
                              Control1..1
                              Must Supporttrue
                              Fixed Valuetable7-Line2a-c-Controlling-High-Blood-Pressure-CMS165
                              424. Parameters.parameter:reportNames.part:table7-Line2a-c.value[x]
                              Control1..1
                              Typeboolean
                              [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                              Must Supporttrue
                              426. Parameters.parameter:reportNames.part:table7-Line3a-f
                              Slice Nametable7-Line3a-f
                              Control1..1
                              Must Supporttrue
                              428. Parameters.parameter:reportNames.part:table7-Line3a-f.name
                              Control1..1
                              Must Supporttrue
                              Fixed Valuetable7-Line3a-f-HbA1c-Poor-Control-CMS122
                              430. Parameters.parameter:reportNames.part:table7-Line3a-f.value[x]
                              Control1..1
                              Typeboolean
                              [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                              Must Supporttrue

                              Guidance on how to interpret the contents of this table can be found here

                              0. Parameters
                              Definition

                              The UDS+ profile is based on the **Parameters FHIR Resource and establishes the core elements, extensions, vocabularies and value sets for representing the Patients and if they are counted for the various reports.


                              This resource is a non-persisted resource used to pass information into and back from an operation. It has no other use, and there is no RESTful endpoint associated with it.

                              ShortUDS Plus Patient Reporting ParametersOperation Request or Response
                              Comments

                              The parameters that may be used are defined by the OperationDefinition resource.

                              Control0..*
                              Is Modifierfalse
                              Summaryfalse
                              2. Parameters.implicitRules
                              Definition

                              A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

                              ShortA set of rules under which this content was created
                              Comments

                              Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

                              Control0..1
                              Typeuri
                              Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                              Summarytrue
                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              4. Parameters.parameter
                              Definition

                              A parameter passed to or received from the operation.

                              ShortOperation Parameter
                              Control20..*
                              TypeBackboneElement
                              Is Modifierfalse
                              Must Supporttrue
                              Summarytrue
                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              inv-1: A parameter must have one and only one of (value, resource, part) ((part.exists() and value.empty() and resource.empty()) or (part.empty() and (value.exists() xor resource.exists())))
                              inv-1: A parameter must have one and only one of (value, resource, part) ((part.exists() and value.empty() and resource.empty()) or (part.empty() and (value.exists() xor resource.exists())))
                              SlicingThis element introduces a set of slices on Parameters.parameter. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                              • value @ $this.name
                              • 6. Parameters.parameter.modifierExtension
                                Definition

                                May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                ShortExtensions that cannot be ignored even if unrecognized
                                Comments

                                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                Control0..*
                                TypeExtension
                                Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                Summarytrue
                                Requirements

                                Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                Alternate Namesextensions, user content, modifiers
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                8. Parameters.parameter.name
                                Definition

                                The name of the parameter (reference to the operation definition).

                                ShortName from the definition
                                Control1..1
                                Typestring
                                Is Modifierfalse
                                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                Summarytrue
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                10. Parameters.parameter:patientReference
                                Slice NamepatientReference
                                Definition

                                A parameter passed to or received from the operation.

                                ShortOperation Parameter
                                Control10..1*
                                TypeBackboneElement
                                Is Modifierfalse
                                Must Supporttrue
                                Summarytrue
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                inv-1: A parameter must have one and only one of (value, resource, part) ((part.exists() and value.empty() and resource.empty()) or (part.empty() and (value.exists() xor resource.exists())))
                                inv-1: A parameter must have one and only one of (value, resource, part) ((part.exists() and value.empty() and resource.empty()) or (part.empty() and (value.exists() xor resource.exists())))
                                12. Parameters.parameter:patientReference.modifierExtension
                                Definition

                                May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                ShortExtensions that cannot be ignored even if unrecognized
                                Comments

                                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                Control0..*
                                TypeExtension
                                Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                Summarytrue
                                Requirements

                                Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                Alternate Namesextensions, user content, modifiers
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                14. Parameters.parameter:patientReference.name
                                Definition

                                The name of the parameter (reference to the operation definition).

                                ShortName from the definition
                                Control1..1
                                Typestring
                                Is Modifierfalse
                                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                Must Supporttrue
                                Summarytrue
                                Fixed ValuepatientReference
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                16. Parameters.parameter:patientReference.value[x]
                                Definition

                                If the parameter is a data type.

                                ShortIf parameter is a data type
                                Control10..1
                                This element is affected by the following invariants: inv-1
                                TypeReference, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
                                [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                Is Modifierfalse
                                Must Supporttrue
                                Summarytrue
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                18. Parameters.parameter:patientReference.value[x].display
                                Definition

                                Plain text narrative that identifies the resource in addition to the resource reference.

                                ShortText alternative for the resource
                                Comments

                                This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.

                                Control0..01
                                Typestring
                                Is Modifierfalse
                                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                Must Supportfalse
                                Summarytrue
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                20. Parameters.parameter:combinedFundingStreams
                                Slice NamecombinedFundingStreams
                                Definition

                                A parameter passed to or received from the operation.

                                ShortOperation Parameter
                                Control10..1*
                                TypeBackboneElement
                                Is Modifierfalse
                                Must Supporttrue
                                Summarytrue
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                inv-1: A parameter must have one and only one of (value, resource, part) ((part.exists() and value.empty() and resource.empty()) or (part.empty() and (value.exists() xor resource.exists())))
                                inv-1: A parameter must have one and only one of (value, resource, part) ((part.exists() and value.empty() and resource.empty()) or (part.empty() and (value.exists() xor resource.exists())))
                                22. Parameters.parameter:combinedFundingStreams.modifierExtension
                                Definition

                                May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                ShortExtensions that cannot be ignored even if unrecognized
                                Comments

                                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                Control0..*
                                TypeExtension
                                Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                Summarytrue
                                Requirements

                                Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                Alternate Namesextensions, user content, modifiers
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                24. Parameters.parameter:combinedFundingStreams.name
                                Definition

                                The name of the parameter (reference to the operation definition).

                                ShortName from the definition
                                Control1..1
                                Typestring
                                Is Modifierfalse
                                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                Must Supporttrue
                                Summarytrue
                                Fixed ValuecombinedFundingStreams
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                26. Parameters.parameter:combinedFundingStreams.value[x]
                                Definition

                                If the parameter is a data type.

                                ShortIf parameter is a data type
                                Control10..1
                                This element is affected by the following invariants: inv-1
                                Typestring, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
                                [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                Is Modifierfalse
                                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                Must Supporttrue
                                Summarytrue
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                28. Parameters.parameter:reportNames
                                Slice NamereportNames
                                Definition

                                A parameter passed to or received from the operation.

                                ShortOperation Parameter
                                Control10..1*
                                TypeBackboneElement
                                Is Modifierfalse
                                Must Supporttrue
                                Summarytrue
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                inv-1: A parameter must have one and only one of (value, resource, part) ((part.exists() and value.empty() and resource.empty()) or (part.empty() and (value.exists() xor resource.exists())))
                                inv-1: A parameter must have one and only one of (value, resource, part) ((part.exists() and value.empty() and resource.empty()) or (part.empty() and (value.exists() xor resource.exists())))
                                30. Parameters.parameter:reportNames.modifierExtension
                                Definition

                                May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                ShortExtensions that cannot be ignored even if unrecognized
                                Comments

                                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                Control0..*
                                TypeExtension
                                Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                Summarytrue
                                Requirements

                                Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                Alternate Namesextensions, user content, modifiers
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                32. Parameters.parameter:reportNames.name
                                Definition

                                The name of the parameter (reference to the operation definition).

                                ShortName from the definition
                                Control1..1
                                Typestring
                                Is Modifierfalse
                                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                Must Supporttrue
                                Summarytrue
                                Fixed ValuereportNames
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                34. Parameters.parameter:reportNames.part
                                Definition

                                A named part of a multi-part parameter.

                                ShortNamed part of a multi-part parameter
                                Comments

                                Only one level of nested parameters is allowed.

                                Control0..*
                                TypeSeettp://hl7.org/fhir/StructureDefinition/Parameters#Parameters.parameter
                                Is Modifierfalse
                                Must Supporttrue
                                Summarytrue
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                SlicingThis element introduces a set of slices on Parameters.parameter.part. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                                • value @ $this.name
                                • 36. Parameters.parameter:reportNames.part:patientsByZip
                                  Slice NamepatientsByZip
                                  Definition

                                  A named part of a multi-part parameter.

                                  ShortNamed part of a multi-part parameter
                                  Comments

                                  Only one level of nested parameters is allowed.

                                  Control10..1*
                                  TypeBackboneElement
                                  Is Modifierfalse
                                  Must Supporttrue
                                  Summarytrue
                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                  38. Parameters.parameter:reportNames.part:patientsByZip.modifierExtension
                                  Definition

                                  May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                  Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                  ShortExtensions that cannot be ignored even if unrecognized
                                  Comments

                                  There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                  Control0..*
                                  TypeExtension
                                  Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                  Summarytrue
                                  Requirements

                                  Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                  Alternate Namesextensions, user content, modifiers
                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                  40. Parameters.parameter:reportNames.part:patientsByZip.name
                                  Definition

                                  The name of the parameter (reference to the operation definition).

                                  ShortName from the definition
                                  Control1..1
                                  Typestring
                                  Is Modifierfalse
                                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                  Must Supporttrue
                                  Summarytrue
                                  Fixed ValuepatientsByZip
                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                  42. Parameters.parameter:reportNames.part:patientsByZip.value[x]
                                  Definition

                                  If the parameter is a data type.

                                  ShortIf parameter is a data type
                                  Control10..1
                                  This element is affected by the following invariants: inv-1
                                  Typeboolean, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, Expression, Signature, unsignedInt, time
                                  [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                  Is Modifierfalse
                                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                  Must Supporttrue
                                  Summarytrue
                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                  44. Parameters.parameter:reportNames.part:table3A
                                  Slice Nametable3A
                                  Definition

                                  A named part of a multi-part parameter.

                                  ShortNamed part of a multi-part parameter
                                  Comments

                                  Only one level of nested parameters is allowed.

                                  Control10..1*
                                  TypeBackboneElement
                                  Is Modifierfalse
                                  Must Supporttrue
                                  Summarytrue
                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                  46. Parameters.parameter:reportNames.part:table3A.modifierExtension
                                  Definition

                                  May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                  Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                  ShortExtensions that cannot be ignored even if unrecognized
                                  Comments

                                  There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                  Control0..*
                                  TypeExtension
                                  Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                  Summarytrue
                                  Requirements

                                  Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                  Alternate Namesextensions, user content, modifiers
                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                  48. Parameters.parameter:reportNames.part:table3A.name
                                  Definition

                                  The name of the parameter (reference to the operation definition).

                                  ShortName from the definition
                                  Control1..1
                                  Typestring
                                  Is Modifierfalse
                                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                  Must Supporttrue
                                  Summarytrue
                                  Fixed Valuetable3A
                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                  50. Parameters.parameter:reportNames.part:table3A.value[x]
                                  Definition

                                  If the parameter is a data type.

                                  ShortIf parameter is a data type
                                  Control10..1
                                  This element is affected by the following invariants: inv-1
                                  Typeboolean, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, Expression, Signature, unsignedInt, time
                                  [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                  Is Modifierfalse
                                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                  Must Supporttrue
                                  Summarytrue
                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                  52. Parameters.parameter:reportNames.part:table3B
                                  Slice Nametable3B
                                  Definition

                                  A named part of a multi-part parameter.

                                  ShortNamed part of a multi-part parameter
                                  Comments

                                  Only one level of nested parameters is allowed.

                                  Control10..1*
                                  TypeBackboneElement
                                  Is Modifierfalse
                                  Must Supporttrue
                                  Summarytrue
                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                  54. Parameters.parameter:reportNames.part:table3B.modifierExtension
                                  Definition

                                  May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                  Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                  ShortExtensions that cannot be ignored even if unrecognized
                                  Comments

                                  There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                  Control0..*
                                  TypeExtension
                                  Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                  Summarytrue
                                  Requirements

                                  Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                  Alternate Namesextensions, user content, modifiers
                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                  56. Parameters.parameter:reportNames.part:table3B.name
                                  Definition

                                  The name of the parameter (reference to the operation definition).

                                  ShortName from the definition
                                  Control1..1
                                  Typestring
                                  Is Modifierfalse
                                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                  Must Supporttrue
                                  Summarytrue
                                  Fixed Valuetable3B
                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                  58. Parameters.parameter:reportNames.part:table3B.value[x]
                                  Definition

                                  If the parameter is a data type.

                                  ShortIf parameter is a data type
                                  Control10..1
                                  This element is affected by the following invariants: inv-1
                                  Typeboolean, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, Expression, Signature, unsignedInt, time
                                  [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                  Is Modifierfalse
                                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                  Must Supporttrue
                                  Summarytrue
                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                  60. Parameters.parameter:reportNames.part:table4
                                  Slice Nametable4
                                  Definition

                                  A named part of a multi-part parameter.

                                  ShortNamed part of a multi-part parameter
                                  Comments

                                  Only one level of nested parameters is allowed.

                                  Control10..1*
                                  TypeBackboneElement
                                  Is Modifierfalse
                                  Must Supporttrue
                                  Summarytrue
                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                  62. Parameters.parameter:reportNames.part:table4.modifierExtension
                                  Definition

                                  May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                  Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                  ShortExtensions that cannot be ignored even if unrecognized
                                  Comments

                                  There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                  Control0..*
                                  TypeExtension
                                  Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                  Summarytrue
                                  Requirements

                                  Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                  Alternate Namesextensions, user content, modifiers
                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                  64. Parameters.parameter:reportNames.part:table4.name
                                  Definition

                                  The name of the parameter (reference to the operation definition).

                                  ShortName from the definition
                                  Control1..1
                                  Typestring
                                  Is Modifierfalse
                                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                  Must Supporttrue
                                  Summarytrue
                                  Fixed Valuetable4
                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                  66. Parameters.parameter:reportNames.part:table4.value[x]
                                  Definition

                                  If the parameter is a data type.

                                  ShortIf parameter is a data type
                                  Control10..1
                                  This element is affected by the following invariants: inv-1
                                  Typeboolean, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, Expression, Signature, unsignedInt, time
                                  [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                  Is Modifierfalse
                                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                  Must Supporttrue
                                  Summarytrue
                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                  68. Parameters.parameter:reportNames.part:table6A
                                  Slice Nametable6A
                                  Definition

                                  A named part of a multi-part parameter.

                                  ShortNamed part of a multi-part parameter
                                  Comments

                                  Only one level of nested parameters is allowed.

                                  Control10..1*
                                  TypeBackboneElement
                                  Is Modifierfalse
                                  Must Supporttrue
                                  Summarytrue
                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                  70. Parameters.parameter:reportNames.part:table6A.modifierExtension
                                  Definition

                                  May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                  Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                  ShortExtensions that cannot be ignored even if unrecognized
                                  Comments

                                  There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                  Control0..*
                                  TypeExtension
                                  Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                  Summarytrue
                                  Requirements

                                  Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                  Alternate Namesextensions, user content, modifiers
                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                  72. Parameters.parameter:reportNames.part:table6A.name
                                  Definition

                                  The name of the parameter (reference to the operation definition).

                                  ShortName from the definition
                                  Control1..1
                                  Typestring
                                  Is Modifierfalse
                                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                  Must Supporttrue
                                  Summarytrue
                                  Fixed Valuetable6A
                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                  74. Parameters.parameter:reportNames.part:table6A.value[x]
                                  Definition

                                  If the parameter is a data type.

                                  ShortIf parameter is a data type
                                  Control10..1
                                  This element is affected by the following invariants: inv-1
                                  Typeboolean, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, Expression, Signature, unsignedInt, time
                                  [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                  Is Modifierfalse
                                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                  Must Supporttrue
                                  Summarytrue
                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                  76. Parameters.parameter:reportNames.part:table6B-Line1-6
                                  Slice Nametable6B-Line1-6
                                  Definition

                                  A named part of a multi-part parameter.

                                  ShortNamed part of a multi-part parameter
                                  Comments

                                  Only one level of nested parameters is allowed.

                                  Control10..1*
                                  TypeBackboneElement
                                  Is Modifierfalse
                                  Must Supporttrue
                                  Summarytrue
                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                  78. Parameters.parameter:reportNames.part:table6B-Line1-6.modifierExtension
                                  Definition

                                  May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                  Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                  ShortExtensions that cannot be ignored even if unrecognized
                                  Comments

                                  There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                  Control0..*
                                  TypeExtension
                                  Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                  Summarytrue
                                  Requirements

                                  Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                  Alternate Namesextensions, user content, modifiers
                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                  80. Parameters.parameter:reportNames.part:table6B-Line1-6.name
                                  Definition

                                  The name of the parameter (reference to the operation definition).

                                  ShortName from the definition
                                  Control1..1
                                  Typestring
                                  Is Modifierfalse
                                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                  Must Supporttrue
                                  Summarytrue
                                  Fixed Valuetable6B-Line1-6-Age-Of-Prenatal-Care-Patients
                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                  82. Parameters.parameter:reportNames.part:table6B-Line1-6.value[x]
                                  Definition

                                  If the parameter is a data type.

                                  ShortIf parameter is a data type
                                  Control10..1
                                  This element is affected by the following invariants: inv-1
                                  Typeboolean, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, Expression, Signature, unsignedInt, time
                                  [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                  Is Modifierfalse
                                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                  Must Supporttrue
                                  Summarytrue
                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                  84. Parameters.parameter:reportNames.part:table6B-Line7-9
                                  Slice Nametable6B-Line7-9
                                  Definition

                                  A named part of a multi-part parameter.

                                  ShortNamed part of a multi-part parameter
                                  Comments

                                  Only one level of nested parameters is allowed.

                                  Control10..1*
                                  TypeBackboneElement
                                  Is Modifierfalse
                                  Must Supporttrue
                                  Summarytrue
                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                  86. Parameters.parameter:reportNames.part:table6B-Line7-9.modifierExtension
                                  Definition

                                  May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                  Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                  ShortExtensions that cannot be ignored even if unrecognized
                                  Comments

                                  There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                  Control0..*
                                  TypeExtension
                                  Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                  Summarytrue
                                  Requirements

                                  Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                  Alternate Namesextensions, user content, modifiers
                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                  88. Parameters.parameter:reportNames.part:table6B-Line7-9.name
                                  Definition

                                  The name of the parameter (reference to the operation definition).

                                  ShortName from the definition
                                  Control1..1
                                  Typestring
                                  Is Modifierfalse
                                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                  Must Supporttrue
                                  Summarytrue
                                  Fixed Valuetable6B-Line7-9-Early-Entry-Into-Prenatal-Care
                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                  90. Parameters.parameter:reportNames.part:table6B-Line7-9.value[x]
                                  Definition

                                  If the parameter is a data type.

                                  ShortIf parameter is a data type
                                  Control10..1
                                  This element is affected by the following invariants: inv-1
                                  Typeboolean, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, Expression, Signature, unsignedInt, time
                                  [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                  Is Modifierfalse
                                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                  Must Supporttrue
                                  Summarytrue
                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                  92. Parameters.parameter:reportNames.part:table6B-Line10
                                  Slice Nametable6B-Line10
                                  Definition

                                  A named part of a multi-part parameter.

                                  ShortNamed part of a multi-part parameter
                                  Comments

                                  Only one level of nested parameters is allowed.

                                  Control10..1*
                                  TypeBackboneElement
                                  Is Modifierfalse
                                  Must Supporttrue
                                  Summarytrue
                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                  94. Parameters.parameter:reportNames.part:table6B-Line10.modifierExtension
                                  Definition

                                  May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                  Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                  ShortExtensions that cannot be ignored even if unrecognized
                                  Comments

                                  There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                  Control0..*
                                  TypeExtension
                                  Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                  Summarytrue
                                  Requirements

                                  Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                  Alternate Namesextensions, user content, modifiers
                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                  96. Parameters.parameter:reportNames.part:table6B-Line10.name
                                  Definition

                                  The name of the parameter (reference to the operation definition).

                                  ShortName from the definition
                                  Control1..1
                                  Typestring
                                  Is Modifierfalse
                                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                  Must Supporttrue
                                  Summarytrue
                                  Fixed Valuetable6B-Line10-Childhood-Immunization-Status-CMS117
                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                  98. Parameters.parameter:reportNames.part:table6B-Line10.value[x]
                                  Definition

                                  If the parameter is a data type.

                                  ShortIf parameter is a data type
                                  Control10..1
                                  This element is affected by the following invariants: inv-1
                                  Typeboolean, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, Expression, Signature, unsignedInt, time
                                  [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                  Is Modifierfalse
                                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                  Must Supporttrue
                                  Summarytrue
                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                  100. Parameters.parameter:reportNames.part:table6B-Line10.part
                                  Definition

                                  A named part of a multi-part parameter.

                                  ShortNamed part of a multi-part parameter
                                  Comments

                                  Only one level of nested parameters is allowed.

                                  Control0..*
                                  TypeSeettp://hl7.org/fhir/StructureDefinition/Parameters#Parameters.parameter
                                  Is Modifierfalse
                                  Must Supporttrue
                                  Summarytrue
                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                  SlicingThis element introduces a set of slices on Parameters.parameter.part.part. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                                  • value @ $this.name
                                  • 102. Parameters.parameter:reportNames.part:table6B-Line10.part:table6B-Line10-den
                                    Slice Nametable6B-Line10-den
                                    Definition

                                    A named part of a multi-part parameter.

                                    ShortNamed part of a multi-part parameter
                                    Comments

                                    Only one level of nested parameters is allowed.

                                    Control0..1*
                                    TypeBackboneElement
                                    Is Modifierfalse
                                    Must Supporttrue
                                    Summarytrue
                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                    104. Parameters.parameter:reportNames.part:table6B-Line10.part:table6B-Line10-den.modifierExtension
                                    Definition

                                    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                    ShortExtensions that cannot be ignored even if unrecognized
                                    Comments

                                    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                    Control0..*
                                    TypeExtension
                                    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                    Summarytrue
                                    Requirements

                                    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                    Alternate Namesextensions, user content, modifiers
                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                    106. Parameters.parameter:reportNames.part:table6B-Line10.part:table6B-Line10-den.name
                                    Definition

                                    The name of the parameter (reference to the operation definition).

                                    ShortName from the definition
                                    Control1..1
                                    Typestring
                                    Is Modifierfalse
                                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                    Must Supporttrue
                                    Summarytrue
                                    Fixed Valuetable6B-Line10-Childhood-Immunization-Status-CMS117-den
                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                    108. Parameters.parameter:reportNames.part:table6B-Line10.part:table6B-Line10-den.value[x]
                                    Definition

                                    If the parameter is a data type.

                                    ShortIf parameter is a data type
                                    Control10..1
                                    This element is affected by the following invariants: inv-1
                                    Typeboolean, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, Expression, Signature, unsignedInt, time
                                    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                    Is Modifierfalse
                                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                    Must Supporttrue
                                    Summarytrue
                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                    110. Parameters.parameter:reportNames.part:table6B-Line10.part:table6B-Line10-denexcl
                                    Slice Nametable6B-Line10-denexcl
                                    Definition

                                    A named part of a multi-part parameter.

                                    ShortNamed part of a multi-part parameter
                                    Comments

                                    Only one level of nested parameters is allowed.

                                    Control0..1*
                                    TypeBackboneElement
                                    Is Modifierfalse
                                    Must Supporttrue
                                    Summarytrue
                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                    112. Parameters.parameter:reportNames.part:table6B-Line10.part:table6B-Line10-denexcl.modifierExtension
                                    Definition

                                    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                    ShortExtensions that cannot be ignored even if unrecognized
                                    Comments

                                    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                    Control0..*
                                    TypeExtension
                                    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                    Summarytrue
                                    Requirements

                                    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                    Alternate Namesextensions, user content, modifiers
                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                    114. Parameters.parameter:reportNames.part:table6B-Line10.part:table6B-Line10-denexcl.name
                                    Definition

                                    The name of the parameter (reference to the operation definition).

                                    ShortName from the definition
                                    Control1..1
                                    Typestring
                                    Is Modifierfalse
                                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                    Must Supporttrue
                                    Summarytrue
                                    Fixed Valuetable6B-Line10-Childhood-Immunization-Status-CMS117-denexcl
                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                    116. Parameters.parameter:reportNames.part:table6B-Line10.part:table6B-Line10-denexcl.value[x]
                                    Definition

                                    If the parameter is a data type.

                                    ShortIf parameter is a data type
                                    Control10..1
                                    This element is affected by the following invariants: inv-1
                                    Typeboolean, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, Expression, Signature, unsignedInt, time
                                    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                    Is Modifierfalse
                                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                    Must Supporttrue
                                    Summarytrue
                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                    118. Parameters.parameter:reportNames.part:table6B-Line10.part:table6B-Line10-num
                                    Slice Nametable6B-Line10-num
                                    Definition

                                    A named part of a multi-part parameter.

                                    ShortNamed part of a multi-part parameter
                                    Comments

                                    Only one level of nested parameters is allowed.

                                    Control0..1*
                                    TypeBackboneElement
                                    Is Modifierfalse
                                    Must Supporttrue
                                    Summarytrue
                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                    120. Parameters.parameter:reportNames.part:table6B-Line10.part:table6B-Line10-num.modifierExtension
                                    Definition

                                    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                    ShortExtensions that cannot be ignored even if unrecognized
                                    Comments

                                    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                    Control0..*
                                    TypeExtension
                                    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                    Summarytrue
                                    Requirements

                                    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                    Alternate Namesextensions, user content, modifiers
                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                    122. Parameters.parameter:reportNames.part:table6B-Line10.part:table6B-Line10-num.name
                                    Definition

                                    The name of the parameter (reference to the operation definition).

                                    ShortName from the definition
                                    Control1..1
                                    Typestring
                                    Is Modifierfalse
                                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                    Must Supporttrue
                                    Summarytrue
                                    Fixed Valuetable6B-Line10-Childhood-Immunization-Status-CMS117-num
                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                    124. Parameters.parameter:reportNames.part:table6B-Line10.part:table6B-Line10-num.value[x]
                                    Definition

                                    If the parameter is a data type.

                                    ShortIf parameter is a data type
                                    Control10..1
                                    This element is affected by the following invariants: inv-1
                                    Typeboolean, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, Expression, Signature, unsignedInt, time
                                    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                    Is Modifierfalse
                                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                    Must Supporttrue
                                    Summarytrue
                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                    126. Parameters.parameter:reportNames.part:table6B-Line11
                                    Slice Nametable6B-Line11
                                    Definition

                                    A named part of a multi-part parameter.

                                    ShortNamed part of a multi-part parameter
                                    Comments

                                    Only one level of nested parameters is allowed.

                                    Control10..1*
                                    TypeBackboneElement
                                    Is Modifierfalse
                                    Must Supporttrue
                                    Summarytrue
                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                    128. Parameters.parameter:reportNames.part:table6B-Line11.modifierExtension
                                    Definition

                                    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                    ShortExtensions that cannot be ignored even if unrecognized
                                    Comments

                                    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                    Control0..*
                                    TypeExtension
                                    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                    Summarytrue
                                    Requirements

                                    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                    Alternate Namesextensions, user content, modifiers
                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                    130. Parameters.parameter:reportNames.part:table6B-Line11.name
                                    Definition

                                    The name of the parameter (reference to the operation definition).

                                    ShortName from the definition
                                    Control1..1
                                    Typestring
                                    Is Modifierfalse
                                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                    Must Supporttrue
                                    Summarytrue
                                    Fixed Valuetable6B-Line11-Cervical-Cancer-Screening-CMS124
                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                    132. Parameters.parameter:reportNames.part:table6B-Line11.value[x]
                                    Definition

                                    If the parameter is a data type.

                                    ShortIf parameter is a data type
                                    Control10..1
                                    This element is affected by the following invariants: inv-1
                                    Typeboolean, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, Expression, Signature, unsignedInt, time
                                    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                    Is Modifierfalse
                                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                    Must Supporttrue
                                    Summarytrue
                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                    134. Parameters.parameter:reportNames.part:table6B-Line11.part
                                    Definition

                                    A named part of a multi-part parameter.

                                    ShortNamed part of a multi-part parameter
                                    Comments

                                    Only one level of nested parameters is allowed.

                                    Control0..*
                                    TypeSeettp://hl7.org/fhir/StructureDefinition/Parameters#Parameters.parameter
                                    Is Modifierfalse
                                    Must Supporttrue
                                    Summarytrue
                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                    SlicingThis element introduces a set of slices on Parameters.parameter.part.part. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                                    • value @ $this.name
                                    • 136. Parameters.parameter:reportNames.part:table6B-Line11.part:table6B-Line11-den
                                      Slice Nametable6B-Line11-den
                                      Definition

                                      A named part of a multi-part parameter.

                                      ShortNamed part of a multi-part parameter
                                      Comments

                                      Only one level of nested parameters is allowed.

                                      Control0..1*
                                      TypeBackboneElement
                                      Is Modifierfalse
                                      Must Supporttrue
                                      Summarytrue
                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                      138. Parameters.parameter:reportNames.part:table6B-Line11.part:table6B-Line11-den.modifierExtension
                                      Definition

                                      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                      ShortExtensions that cannot be ignored even if unrecognized
                                      Comments

                                      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                      Control0..*
                                      TypeExtension
                                      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                      Summarytrue
                                      Requirements

                                      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                      Alternate Namesextensions, user content, modifiers
                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                      140. Parameters.parameter:reportNames.part:table6B-Line11.part:table6B-Line11-den.name
                                      Definition

                                      The name of the parameter (reference to the operation definition).

                                      ShortName from the definition
                                      Control1..1
                                      Typestring
                                      Is Modifierfalse
                                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                      Must Supporttrue
                                      Summarytrue
                                      Fixed Valuetable6B-Line11-Cervical-Cancer-Screening-CMS124-den
                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                      142. Parameters.parameter:reportNames.part:table6B-Line11.part:table6B-Line11-den.value[x]
                                      Definition

                                      If the parameter is a data type.

                                      ShortIf parameter is a data type
                                      Control10..1
                                      This element is affected by the following invariants: inv-1
                                      Typeboolean, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, Expression, Signature, unsignedInt, time
                                      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                      Is Modifierfalse
                                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                      Must Supporttrue
                                      Summarytrue
                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                      144. Parameters.parameter:reportNames.part:table6B-Line11.part:table6B-Line11-denexcl
                                      Slice Nametable6B-Line11-denexcl
                                      Definition

                                      A named part of a multi-part parameter.

                                      ShortNamed part of a multi-part parameter
                                      Comments

                                      Only one level of nested parameters is allowed.

                                      Control0..1*
                                      TypeBackboneElement
                                      Is Modifierfalse
                                      Must Supporttrue
                                      Summarytrue
                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                      146. Parameters.parameter:reportNames.part:table6B-Line11.part:table6B-Line11-denexcl.modifierExtension
                                      Definition

                                      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                      ShortExtensions that cannot be ignored even if unrecognized
                                      Comments

                                      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                      Control0..*
                                      TypeExtension
                                      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                      Summarytrue
                                      Requirements

                                      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                      Alternate Namesextensions, user content, modifiers
                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                      148. Parameters.parameter:reportNames.part:table6B-Line11.part:table6B-Line11-denexcl.name
                                      Definition

                                      The name of the parameter (reference to the operation definition).

                                      ShortName from the definition
                                      Control1..1
                                      Typestring
                                      Is Modifierfalse
                                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                      Must Supporttrue
                                      Summarytrue
                                      Fixed Valuetable6B-Line11-Cervical-Cancer-Screening-CMS124-denexcl
                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                      150. Parameters.parameter:reportNames.part:table6B-Line11.part:table6B-Line11-denexcl.value[x]
                                      Definition

                                      If the parameter is a data type.

                                      ShortIf parameter is a data type
                                      Control10..1
                                      This element is affected by the following invariants: inv-1
                                      Typeboolean, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, Expression, Signature, unsignedInt, time
                                      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                      Is Modifierfalse
                                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                      Must Supporttrue
                                      Summarytrue
                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                      152. Parameters.parameter:reportNames.part:table6B-Line11.part:table6B-Line11-num
                                      Slice Nametable6B-Line11-num
                                      Definition

                                      A named part of a multi-part parameter.

                                      ShortNamed part of a multi-part parameter
                                      Comments

                                      Only one level of nested parameters is allowed.

                                      Control0..1*
                                      TypeBackboneElement
                                      Is Modifierfalse
                                      Must Supporttrue
                                      Summarytrue
                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                      154. Parameters.parameter:reportNames.part:table6B-Line11.part:table6B-Line11-num.modifierExtension
                                      Definition

                                      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                      ShortExtensions that cannot be ignored even if unrecognized
                                      Comments

                                      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                      Control0..*
                                      TypeExtension
                                      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                      Summarytrue
                                      Requirements

                                      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                      Alternate Namesextensions, user content, modifiers
                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                      156. Parameters.parameter:reportNames.part:table6B-Line11.part:table6B-Line11-num.name
                                      Definition

                                      The name of the parameter (reference to the operation definition).

                                      ShortName from the definition
                                      Control1..1
                                      Typestring
                                      Is Modifierfalse
                                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                      Must Supporttrue
                                      Summarytrue
                                      Fixed Valuetable6B-Line11-Cervical-Cancer-Screening-CMS124-num
                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                      158. Parameters.parameter:reportNames.part:table6B-Line11.part:table6B-Line11-num.value[x]
                                      Definition

                                      If the parameter is a data type.

                                      ShortIf parameter is a data type
                                      Control10..1
                                      This element is affected by the following invariants: inv-1
                                      Typeboolean, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, Expression, Signature, unsignedInt, time
                                      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                      Is Modifierfalse
                                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                      Must Supporttrue
                                      Summarytrue
                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                      160. Parameters.parameter:reportNames.part:table6B-Line11a
                                      Slice Nametable6B-Line11a
                                      Definition

                                      A named part of a multi-part parameter.

                                      ShortNamed part of a multi-part parameter
                                      Comments

                                      Only one level of nested parameters is allowed.

                                      Control10..1*
                                      TypeBackboneElement
                                      Is Modifierfalse
                                      Must Supporttrue
                                      Summarytrue
                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                      162. Parameters.parameter:reportNames.part:table6B-Line11a.modifierExtension
                                      Definition

                                      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                      ShortExtensions that cannot be ignored even if unrecognized
                                      Comments

                                      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                      Control0..*
                                      TypeExtension
                                      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                      Summarytrue
                                      Requirements

                                      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                      Alternate Namesextensions, user content, modifiers
                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                      164. Parameters.parameter:reportNames.part:table6B-Line11a.name
                                      Definition

                                      The name of the parameter (reference to the operation definition).

                                      ShortName from the definition
                                      Control1..1
                                      Typestring
                                      Is Modifierfalse
                                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                      Must Supporttrue
                                      Summarytrue
                                      Fixed Valuetable6B-Line11a-Breast-Cancer-Screening-CMS125
                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                      166. Parameters.parameter:reportNames.part:table6B-Line11a.value[x]
                                      Definition

                                      If the parameter is a data type.

                                      ShortIf parameter is a data type
                                      Control10..1
                                      This element is affected by the following invariants: inv-1
                                      Typeboolean, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, Expression, Signature, unsignedInt, time
                                      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                      Is Modifierfalse
                                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                      Must Supporttrue
                                      Summarytrue
                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                      168. Parameters.parameter:reportNames.part:table6B-Line11a.part
                                      Definition

                                      A named part of a multi-part parameter.

                                      ShortNamed part of a multi-part parameter
                                      Comments

                                      Only one level of nested parameters is allowed.

                                      Control0..*
                                      TypeSeettp://hl7.org/fhir/StructureDefinition/Parameters#Parameters.parameter
                                      Is Modifierfalse
                                      Must Supporttrue
                                      Summarytrue
                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                      SlicingThis element introduces a set of slices on Parameters.parameter.part.part. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                                      • value @ $this.name
                                      • 170. Parameters.parameter:reportNames.part:table6B-Line11a.part:table6B-Line11a-den
                                        Slice Nametable6B-Line11a-den
                                        Definition

                                        A named part of a multi-part parameter.

                                        ShortNamed part of a multi-part parameter
                                        Comments

                                        Only one level of nested parameters is allowed.

                                        Control0..1*
                                        TypeBackboneElement
                                        Is Modifierfalse
                                        Must Supporttrue
                                        Summarytrue
                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                        172. Parameters.parameter:reportNames.part:table6B-Line11a.part:table6B-Line11a-den.modifierExtension
                                        Definition

                                        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                        ShortExtensions that cannot be ignored even if unrecognized
                                        Comments

                                        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                        Control0..*
                                        TypeExtension
                                        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                        Summarytrue
                                        Requirements

                                        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                        Alternate Namesextensions, user content, modifiers
                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                        174. Parameters.parameter:reportNames.part:table6B-Line11a.part:table6B-Line11a-den.name
                                        Definition

                                        The name of the parameter (reference to the operation definition).

                                        ShortName from the definition
                                        Control1..1
                                        Typestring
                                        Is Modifierfalse
                                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                        Must Supporttrue
                                        Summarytrue
                                        Fixed Valuetable6B-Line11a-Breast-Cancer-Screening-CMS125-den
                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                        176. Parameters.parameter:reportNames.part:table6B-Line11a.part:table6B-Line11a-den.value[x]
                                        Definition

                                        If the parameter is a data type.

                                        ShortIf parameter is a data type
                                        Control10..1
                                        This element is affected by the following invariants: inv-1
                                        Typeboolean, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, Expression, Signature, unsignedInt, time
                                        [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                        Is Modifierfalse
                                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                        Must Supporttrue
                                        Summarytrue
                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                        178. Parameters.parameter:reportNames.part:table6B-Line11a.part:table6B-Line11a-denexcl
                                        Slice Nametable6B-Line11a-denexcl
                                        Definition

                                        A named part of a multi-part parameter.

                                        ShortNamed part of a multi-part parameter
                                        Comments

                                        Only one level of nested parameters is allowed.

                                        Control0..1*
                                        TypeBackboneElement
                                        Is Modifierfalse
                                        Must Supporttrue
                                        Summarytrue
                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                        180. Parameters.parameter:reportNames.part:table6B-Line11a.part:table6B-Line11a-denexcl.modifierExtension
                                        Definition

                                        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                        ShortExtensions that cannot be ignored even if unrecognized
                                        Comments

                                        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                        Control0..*
                                        TypeExtension
                                        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                        Summarytrue
                                        Requirements

                                        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                        Alternate Namesextensions, user content, modifiers
                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                        182. Parameters.parameter:reportNames.part:table6B-Line11a.part:table6B-Line11a-denexcl.name
                                        Definition

                                        The name of the parameter (reference to the operation definition).

                                        ShortName from the definition
                                        Control1..1
                                        Typestring
                                        Is Modifierfalse
                                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                        Must Supporttrue
                                        Summarytrue
                                        Fixed Valuetable6B-Line11a-Breast-Cancer-Screening-CMS125-denexcl
                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                        184. Parameters.parameter:reportNames.part:table6B-Line11a.part:table6B-Line11a-denexcl.value[x]
                                        Definition

                                        If the parameter is a data type.

                                        ShortIf parameter is a data type
                                        Control10..1
                                        This element is affected by the following invariants: inv-1
                                        Typeboolean, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, Expression, Signature, unsignedInt, time
                                        [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                        Is Modifierfalse
                                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                        Must Supporttrue
                                        Summarytrue
                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                        186. Parameters.parameter:reportNames.part:table6B-Line11a.part:table6B-Line11a-num
                                        Slice Nametable6B-Line11a-num
                                        Definition

                                        A named part of a multi-part parameter.

                                        ShortNamed part of a multi-part parameter
                                        Comments

                                        Only one level of nested parameters is allowed.

                                        Control0..1*
                                        TypeBackboneElement
                                        Is Modifierfalse
                                        Must Supporttrue
                                        Summarytrue
                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                        188. Parameters.parameter:reportNames.part:table6B-Line11a.part:table6B-Line11a-num.modifierExtension
                                        Definition

                                        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                        ShortExtensions that cannot be ignored even if unrecognized
                                        Comments

                                        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                        Control0..*
                                        TypeExtension
                                        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                        Summarytrue
                                        Requirements

                                        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                        Alternate Namesextensions, user content, modifiers
                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                        190. Parameters.parameter:reportNames.part:table6B-Line11a.part:table6B-Line11a-num.name
                                        Definition

                                        The name of the parameter (reference to the operation definition).

                                        ShortName from the definition
                                        Control1..1
                                        Typestring
                                        Is Modifierfalse
                                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                        Must Supporttrue
                                        Summarytrue
                                        Fixed Valuetable6B-Line11a-Breast-Cancer-Screening-CMS125-num
                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                        192. Parameters.parameter:reportNames.part:table6B-Line11a.part:table6B-Line11a-num.value[x]
                                        Definition

                                        If the parameter is a data type.

                                        ShortIf parameter is a data type
                                        Control10..1
                                        This element is affected by the following invariants: inv-1
                                        Typeboolean, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, Expression, Signature, unsignedInt, time
                                        [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                        Is Modifierfalse
                                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                        Must Supporttrue
                                        Summarytrue
                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                        194. Parameters.parameter:reportNames.part:table6B-Line12
                                        Slice Nametable6B-Line12
                                        Definition

                                        A named part of a multi-part parameter.

                                        ShortNamed part of a multi-part parameter
                                        Comments

                                        Only one level of nested parameters is allowed.

                                        Control10..1*
                                        TypeBackboneElement
                                        Is Modifierfalse
                                        Must Supporttrue
                                        Summarytrue
                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                        196. Parameters.parameter:reportNames.part:table6B-Line12.modifierExtension
                                        Definition

                                        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                        ShortExtensions that cannot be ignored even if unrecognized
                                        Comments

                                        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                        Control0..*
                                        TypeExtension
                                        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                        Summarytrue
                                        Requirements

                                        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                        Alternate Namesextensions, user content, modifiers
                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                        198. Parameters.parameter:reportNames.part:table6B-Line12.name
                                        Definition

                                        The name of the parameter (reference to the operation definition).

                                        ShortName from the definition
                                        Control1..1
                                        Typestring
                                        Is Modifierfalse
                                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                        Must Supporttrue
                                        Summarytrue
                                        Fixed Valuetable6B-Line12-Weight-Assessment-And-Counselling-CMS155
                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                        200. Parameters.parameter:reportNames.part:table6B-Line12.value[x]
                                        Definition

                                        If the parameter is a data type.

                                        ShortIf parameter is a data type
                                        Control10..1
                                        This element is affected by the following invariants: inv-1
                                        Typeboolean, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, Expression, Signature, unsignedInt, time
                                        [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                        Is Modifierfalse
                                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                        Must Supporttrue
                                        Summarytrue
                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                        202. Parameters.parameter:reportNames.part:table6B-Line12.part
                                        Definition

                                        A named part of a multi-part parameter.

                                        ShortNamed part of a multi-part parameter
                                        Comments

                                        Only one level of nested parameters is allowed.

                                        Control0..*
                                        TypeSeettp://hl7.org/fhir/StructureDefinition/Parameters#Parameters.parameter
                                        Is Modifierfalse
                                        Must Supporttrue
                                        Summarytrue
                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                        SlicingThis element introduces a set of slices on Parameters.parameter.part.part. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                                        • value @ $this.name
                                        • 204. Parameters.parameter:reportNames.part:table6B-Line12.part:table6B-Line12-den
                                          Slice Nametable6B-Line12-den
                                          Definition

                                          A named part of a multi-part parameter.

                                          ShortNamed part of a multi-part parameter
                                          Comments

                                          Only one level of nested parameters is allowed.

                                          Control0..1*
                                          TypeBackboneElement
                                          Is Modifierfalse
                                          Must Supporttrue
                                          Summarytrue
                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                          206. Parameters.parameter:reportNames.part:table6B-Line12.part:table6B-Line12-den.modifierExtension
                                          Definition

                                          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                          ShortExtensions that cannot be ignored even if unrecognized
                                          Comments

                                          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                          Control0..*
                                          TypeExtension
                                          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                          Summarytrue
                                          Requirements

                                          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                          Alternate Namesextensions, user content, modifiers
                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                          208. Parameters.parameter:reportNames.part:table6B-Line12.part:table6B-Line12-den.name
                                          Definition

                                          The name of the parameter (reference to the operation definition).

                                          ShortName from the definition
                                          Control1..1
                                          Typestring
                                          Is Modifierfalse
                                          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                          Must Supporttrue
                                          Summarytrue
                                          Fixed Valuetable6B-Line12-Weight-Assessment-And-Counselling-CMS155-den
                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                          210. Parameters.parameter:reportNames.part:table6B-Line12.part:table6B-Line12-den.value[x]
                                          Definition

                                          If the parameter is a data type.

                                          ShortIf parameter is a data type
                                          Control10..1
                                          This element is affected by the following invariants: inv-1
                                          Typeboolean, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, Expression, Signature, unsignedInt, time
                                          [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                          Is Modifierfalse
                                          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                          Must Supporttrue
                                          Summarytrue
                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                          212. Parameters.parameter:reportNames.part:table6B-Line12.part:table6B-Line12-denexcl
                                          Slice Nametable6B-Line12-denexcl
                                          Definition

                                          A named part of a multi-part parameter.

                                          ShortNamed part of a multi-part parameter
                                          Comments

                                          Only one level of nested parameters is allowed.

                                          Control0..1*
                                          TypeBackboneElement
                                          Is Modifierfalse
                                          Must Supporttrue
                                          Summarytrue
                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                          214. Parameters.parameter:reportNames.part:table6B-Line12.part:table6B-Line12-denexcl.modifierExtension
                                          Definition

                                          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                          ShortExtensions that cannot be ignored even if unrecognized
                                          Comments

                                          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                          Control0..*
                                          TypeExtension
                                          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                          Summarytrue
                                          Requirements

                                          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                          Alternate Namesextensions, user content, modifiers
                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                          216. Parameters.parameter:reportNames.part:table6B-Line12.part:table6B-Line12-denexcl.name
                                          Definition

                                          The name of the parameter (reference to the operation definition).

                                          ShortName from the definition
                                          Control1..1
                                          Typestring
                                          Is Modifierfalse
                                          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                          Must Supporttrue
                                          Summarytrue
                                          Fixed Valuetable6B-Line12-Weight-Assessment-And-Counselling-CMS155-denexcl
                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                          218. Parameters.parameter:reportNames.part:table6B-Line12.part:table6B-Line12-denexcl.value[x]
                                          Definition

                                          If the parameter is a data type.

                                          ShortIf parameter is a data type
                                          Control10..1
                                          This element is affected by the following invariants: inv-1
                                          Typeboolean, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, Expression, Signature, unsignedInt, time
                                          [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                          Is Modifierfalse
                                          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                          Must Supporttrue
                                          Summarytrue
                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                          220. Parameters.parameter:reportNames.part:table6B-Line12.part:table6B-Line12-num
                                          Slice Nametable6B-Line12-num
                                          Definition

                                          A named part of a multi-part parameter.

                                          ShortNamed part of a multi-part parameter
                                          Comments

                                          Only one level of nested parameters is allowed.

                                          Control0..1*
                                          TypeBackboneElement
                                          Is Modifierfalse
                                          Must Supporttrue
                                          Summarytrue
                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                          222. Parameters.parameter:reportNames.part:table6B-Line12.part:table6B-Line12-num.modifierExtension
                                          Definition

                                          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                          ShortExtensions that cannot be ignored even if unrecognized
                                          Comments

                                          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                          Control0..*
                                          TypeExtension
                                          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                          Summarytrue
                                          Requirements

                                          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                          Alternate Namesextensions, user content, modifiers
                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                          224. Parameters.parameter:reportNames.part:table6B-Line12.part:table6B-Line12-num.name
                                          Definition

                                          The name of the parameter (reference to the operation definition).

                                          ShortName from the definition
                                          Control1..1
                                          Typestring
                                          Is Modifierfalse
                                          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                          Must Supporttrue
                                          Summarytrue
                                          Fixed Valuetable6B-Line12-Weight-Assessment-And-Counselling-CMS155-num
                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                          226. Parameters.parameter:reportNames.part:table6B-Line12.part:table6B-Line12-num.value[x]
                                          Definition

                                          If the parameter is a data type.

                                          ShortIf parameter is a data type
                                          Control10..1
                                          This element is affected by the following invariants: inv-1
                                          Typeboolean, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, Expression, Signature, unsignedInt, time
                                          [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                          Is Modifierfalse
                                          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                          Must Supporttrue
                                          Summarytrue
                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                          228. Parameters.parameter:reportNames.part:table6B-Line13
                                          Slice Nametable6B-Line13
                                          Definition

                                          A named part of a multi-part parameter.

                                          ShortNamed part of a multi-part parameter
                                          Comments

                                          Only one level of nested parameters is allowed.

                                          Control10..1*
                                          TypeBackboneElement
                                          Is Modifierfalse
                                          Must Supporttrue
                                          Summarytrue
                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                          230. Parameters.parameter:reportNames.part:table6B-Line13.modifierExtension
                                          Definition

                                          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                          ShortExtensions that cannot be ignored even if unrecognized
                                          Comments

                                          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                          Control0..*
                                          TypeExtension
                                          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                          Summarytrue
                                          Requirements

                                          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                          Alternate Namesextensions, user content, modifiers
                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                          232. Parameters.parameter:reportNames.part:table6B-Line13.name
                                          Definition

                                          The name of the parameter (reference to the operation definition).

                                          ShortName from the definition
                                          Control1..1
                                          Typestring
                                          Is Modifierfalse
                                          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                          Must Supporttrue
                                          Summarytrue
                                          Fixed Valuetable6B-Line13-Preventive-Care-And-Screening-BMI-CMS69
                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                          234. Parameters.parameter:reportNames.part:table6B-Line13.value[x]
                                          Definition

                                          If the parameter is a data type.

                                          ShortIf parameter is a data type
                                          Control10..1
                                          This element is affected by the following invariants: inv-1
                                          Typeboolean, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, Expression, Signature, unsignedInt, time
                                          [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                          Is Modifierfalse
                                          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                          Must Supporttrue
                                          Summarytrue
                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                          236. Parameters.parameter:reportNames.part:table6B-Line13.part
                                          Definition

                                          A named part of a multi-part parameter.

                                          ShortNamed part of a multi-part parameter
                                          Comments

                                          Only one level of nested parameters is allowed.

                                          Control0..*
                                          TypeSeettp://hl7.org/fhir/StructureDefinition/Parameters#Parameters.parameter
                                          Is Modifierfalse
                                          Must Supporttrue
                                          Summarytrue
                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                          SlicingThis element introduces a set of slices on Parameters.parameter.part.part. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                                          • value @ $this.name
                                          • 238. Parameters.parameter:reportNames.part:table6B-Line13.part:table6B-Line13-den
                                            Slice Nametable6B-Line13-den
                                            Definition

                                            A named part of a multi-part parameter.

                                            ShortNamed part of a multi-part parameter
                                            Comments

                                            Only one level of nested parameters is allowed.

                                            Control0..1*
                                            TypeBackboneElement
                                            Is Modifierfalse
                                            Must Supporttrue
                                            Summarytrue
                                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                            240. Parameters.parameter:reportNames.part:table6B-Line13.part:table6B-Line13-den.modifierExtension
                                            Definition

                                            May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                            Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                            ShortExtensions that cannot be ignored even if unrecognized
                                            Comments

                                            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                            Control0..*
                                            TypeExtension
                                            Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                            Summarytrue
                                            Requirements

                                            Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                            Alternate Namesextensions, user content, modifiers
                                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                            242. Parameters.parameter:reportNames.part:table6B-Line13.part:table6B-Line13-den.name
                                            Definition

                                            The name of the parameter (reference to the operation definition).

                                            ShortName from the definition
                                            Control1..1
                                            Typestring
                                            Is Modifierfalse
                                            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                            Must Supporttrue
                                            Summarytrue
                                            Fixed Valuetable6B-Line13-Preventive-Care-And-Screening-BMI-CMS69-den
                                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                            244. Parameters.parameter:reportNames.part:table6B-Line13.part:table6B-Line13-den.value[x]
                                            Definition

                                            If the parameter is a data type.

                                            ShortIf parameter is a data type
                                            Control10..1
                                            This element is affected by the following invariants: inv-1
                                            Typeboolean, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, Expression, Signature, unsignedInt, time
                                            [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                            Is Modifierfalse
                                            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                            Must Supporttrue
                                            Summarytrue
                                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                            246. Parameters.parameter:reportNames.part:table6B-Line13.part:table6B-Line13-denexcl
                                            Slice Nametable6B-Line13-denexcl
                                            Definition

                                            A named part of a multi-part parameter.

                                            ShortNamed part of a multi-part parameter
                                            Comments

                                            Only one level of nested parameters is allowed.

                                            Control0..1*
                                            TypeBackboneElement
                                            Is Modifierfalse
                                            Must Supporttrue
                                            Summarytrue
                                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                            248. Parameters.parameter:reportNames.part:table6B-Line13.part:table6B-Line13-denexcl.modifierExtension
                                            Definition

                                            May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                            Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                            ShortExtensions that cannot be ignored even if unrecognized
                                            Comments

                                            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                            Control0..*
                                            TypeExtension
                                            Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                            Summarytrue
                                            Requirements

                                            Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                            Alternate Namesextensions, user content, modifiers
                                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                            250. Parameters.parameter:reportNames.part:table6B-Line13.part:table6B-Line13-denexcl.name
                                            Definition

                                            The name of the parameter (reference to the operation definition).

                                            ShortName from the definition
                                            Control1..1
                                            Typestring
                                            Is Modifierfalse
                                            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                            Must Supporttrue
                                            Summarytrue
                                            Fixed Valuetable6B-Line13-Preventive-Care-And-Screening-BMI-CMS69-denexcl
                                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                            252. Parameters.parameter:reportNames.part:table6B-Line13.part:table6B-Line13-denexcl.value[x]
                                            Definition

                                            If the parameter is a data type.

                                            ShortIf parameter is a data type
                                            Control10..1
                                            This element is affected by the following invariants: inv-1
                                            Typeboolean, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, Expression, Signature, unsignedInt, time
                                            [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                            Is Modifierfalse
                                            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                            Must Supporttrue
                                            Summarytrue
                                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                            254. Parameters.parameter:reportNames.part:table6B-Line13.part:table6B-Line13-denexp
                                            Slice Nametable6B-Line13-denexp
                                            Definition

                                            A named part of a multi-part parameter.

                                            ShortNamed part of a multi-part parameter
                                            Comments

                                            Only one level of nested parameters is allowed.

                                            Control0..1*
                                            TypeBackboneElement
                                            Is Modifierfalse
                                            Must Supporttrue
                                            Summarytrue
                                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                            256. Parameters.parameter:reportNames.part:table6B-Line13.part:table6B-Line13-denexp.modifierExtension
                                            Definition

                                            May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                            Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                            ShortExtensions that cannot be ignored even if unrecognized
                                            Comments

                                            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                            Control0..*
                                            TypeExtension
                                            Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                            Summarytrue
                                            Requirements

                                            Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                            Alternate Namesextensions, user content, modifiers
                                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                            258. Parameters.parameter:reportNames.part:table6B-Line13.part:table6B-Line13-denexp.name
                                            Definition

                                            The name of the parameter (reference to the operation definition).

                                            ShortName from the definition
                                            Control1..1
                                            Typestring
                                            Is Modifierfalse
                                            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                            Must Supporttrue
                                            Summarytrue
                                            Fixed Valuetable6B-Line13-Preventive-Care-And-Screening-BMI-CMS69-denexp
                                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                            260. Parameters.parameter:reportNames.part:table6B-Line13.part:table6B-Line13-denexp.value[x]
                                            Definition

                                            If the parameter is a data type.

                                            ShortIf parameter is a data type
                                            Control10..1
                                            This element is affected by the following invariants: inv-1
                                            Typeboolean, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, Expression, Signature, unsignedInt, time
                                            [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                            Is Modifierfalse
                                            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                            Must Supporttrue
                                            Summarytrue
                                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                            262. Parameters.parameter:reportNames.part:table6B-Line13.part:table6B-Line13-num
                                            Slice Nametable6B-Line13-num
                                            Definition

                                            A named part of a multi-part parameter.

                                            ShortNamed part of a multi-part parameter
                                            Comments

                                            Only one level of nested parameters is allowed.

                                            Control0..1*
                                            TypeBackboneElement
                                            Is Modifierfalse
                                            Must Supporttrue
                                            Summarytrue
                                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                            264. Parameters.parameter:reportNames.part:table6B-Line13.part:table6B-Line13-num.modifierExtension
                                            Definition

                                            May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                            Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                            ShortExtensions that cannot be ignored even if unrecognized
                                            Comments

                                            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                            Control0..*
                                            TypeExtension
                                            Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                            Summarytrue
                                            Requirements

                                            Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                            Alternate Namesextensions, user content, modifiers
                                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                            266. Parameters.parameter:reportNames.part:table6B-Line13.part:table6B-Line13-num.name
                                            Definition

                                            The name of the parameter (reference to the operation definition).

                                            ShortName from the definition
                                            Control1..1
                                            Typestring
                                            Is Modifierfalse
                                            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                            Must Supporttrue
                                            Summarytrue
                                            Fixed Valuetable6B-Line13-Preventive-Care-And-Screening-BMI-CMS69-num
                                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                            268. Parameters.parameter:reportNames.part:table6B-Line13.part:table6B-Line13-num.value[x]
                                            Definition

                                            If the parameter is a data type.

                                            ShortIf parameter is a data type
                                            Control10..1
                                            This element is affected by the following invariants: inv-1
                                            Typeboolean, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, Expression, Signature, unsignedInt, time
                                            [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                            Is Modifierfalse
                                            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                            Must Supporttrue
                                            Summarytrue
                                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                            270. Parameters.parameter:reportNames.part:table6B-Line14a
                                            Slice Nametable6B-Line14a
                                            Definition

                                            A named part of a multi-part parameter.

                                            ShortNamed part of a multi-part parameter
                                            Comments

                                            Only one level of nested parameters is allowed.

                                            Control10..1*
                                            TypeBackboneElement
                                            Is Modifierfalse
                                            Must Supporttrue
                                            Summarytrue
                                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                            272. Parameters.parameter:reportNames.part:table6B-Line14a.modifierExtension
                                            Definition

                                            May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                            Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                            ShortExtensions that cannot be ignored even if unrecognized
                                            Comments

                                            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                            Control0..*
                                            TypeExtension
                                            Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                            Summarytrue
                                            Requirements

                                            Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                            Alternate Namesextensions, user content, modifiers
                                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                            274. Parameters.parameter:reportNames.part:table6B-Line14a.name
                                            Definition

                                            The name of the parameter (reference to the operation definition).

                                            ShortName from the definition
                                            Control1..1
                                            Typestring
                                            Is Modifierfalse
                                            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                            Must Supporttrue
                                            Summarytrue
                                            Fixed Valuetable6B-Line14a-Preventive-Care-And-Screening-Tobacco-Use-CMS138
                                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                            276. Parameters.parameter:reportNames.part:table6B-Line14a.value[x]
                                            Definition

                                            If the parameter is a data type.

                                            ShortIf parameter is a data type
                                            Control10..1
                                            This element is affected by the following invariants: inv-1
                                            Typeboolean, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, Expression, Signature, unsignedInt, time
                                            [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                            Is Modifierfalse
                                            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                            Must Supporttrue
                                            Summarytrue
                                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                            278. Parameters.parameter:reportNames.part:table6B-Line14a.part
                                            Definition

                                            A named part of a multi-part parameter.

                                            ShortNamed part of a multi-part parameter
                                            Comments

                                            Only one level of nested parameters is allowed.

                                            Control0..*
                                            TypeSeettp://hl7.org/fhir/StructureDefinition/Parameters#Parameters.parameter
                                            Is Modifierfalse
                                            Must Supporttrue
                                            Summarytrue
                                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                            SlicingThis element introduces a set of slices on Parameters.parameter.part.part. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                                            • value @ $this.name
                                            • 280. Parameters.parameter:reportNames.part:table6B-Line14a.part:table6B-Line14a-den
                                              Slice Nametable6B-Line14a-den
                                              Definition

                                              A named part of a multi-part parameter.

                                              ShortNamed part of a multi-part parameter
                                              Comments

                                              Only one level of nested parameters is allowed.

                                              Control0..1*
                                              TypeBackboneElement
                                              Is Modifierfalse
                                              Must Supporttrue
                                              Summarytrue
                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                              282. Parameters.parameter:reportNames.part:table6B-Line14a.part:table6B-Line14a-den.modifierExtension
                                              Definition

                                              May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                              Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                              ShortExtensions that cannot be ignored even if unrecognized
                                              Comments

                                              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                              Control0..*
                                              TypeExtension
                                              Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                              Summarytrue
                                              Requirements

                                              Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                              Alternate Namesextensions, user content, modifiers
                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                              284. Parameters.parameter:reportNames.part:table6B-Line14a.part:table6B-Line14a-den.name
                                              Definition

                                              The name of the parameter (reference to the operation definition).

                                              ShortName from the definition
                                              Control1..1
                                              Typestring
                                              Is Modifierfalse
                                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                              Must Supporttrue
                                              Summarytrue
                                              Fixed Valuetable6B-Line14a-Preventive-Care-And-Screening-Tobacco-Use-CMS138-den
                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                              286. Parameters.parameter:reportNames.part:table6B-Line14a.part:table6B-Line14a-den.value[x]
                                              Definition

                                              If the parameter is a data type.

                                              ShortIf parameter is a data type
                                              Control10..1
                                              This element is affected by the following invariants: inv-1
                                              Typeboolean, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, Expression, Signature, unsignedInt, time
                                              [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                              Is Modifierfalse
                                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                              Must Supporttrue
                                              Summarytrue
                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                              288. Parameters.parameter:reportNames.part:table6B-Line14a.part:table6B-Line14a-denexcl
                                              Slice Nametable6B-Line14a-denexcl
                                              Definition

                                              A named part of a multi-part parameter.

                                              ShortNamed part of a multi-part parameter
                                              Comments

                                              Only one level of nested parameters is allowed.

                                              Control0..1*
                                              TypeBackboneElement
                                              Is Modifierfalse
                                              Must Supporttrue
                                              Summarytrue
                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                              290. Parameters.parameter:reportNames.part:table6B-Line14a.part:table6B-Line14a-denexcl.modifierExtension
                                              Definition

                                              May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                              Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                              ShortExtensions that cannot be ignored even if unrecognized
                                              Comments

                                              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                              Control0..*
                                              TypeExtension
                                              Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                              Summarytrue
                                              Requirements

                                              Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                              Alternate Namesextensions, user content, modifiers
                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                              292. Parameters.parameter:reportNames.part:table6B-Line14a.part:table6B-Line14a-denexcl.name
                                              Definition

                                              The name of the parameter (reference to the operation definition).

                                              ShortName from the definition
                                              Control1..1
                                              Typestring
                                              Is Modifierfalse
                                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                              Must Supporttrue
                                              Summarytrue
                                              Fixed Valuetable6B-Line14a-Preventive-Care-And-Screening-Tobacco-Use-CMS138-denexcl
                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                              294. Parameters.parameter:reportNames.part:table6B-Line14a.part:table6B-Line14a-denexcl.value[x]
                                              Definition

                                              If the parameter is a data type.

                                              ShortIf parameter is a data type
                                              Control10..1
                                              This element is affected by the following invariants: inv-1
                                              Typeboolean, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, Expression, Signature, unsignedInt, time
                                              [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                              Is Modifierfalse
                                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                              Must Supporttrue
                                              Summarytrue
                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                              296. Parameters.parameter:reportNames.part:table6B-Line14a.part:table6B-Line14a-num
                                              Slice Nametable6B-Line14a-num
                                              Definition

                                              A named part of a multi-part parameter.

                                              ShortNamed part of a multi-part parameter
                                              Comments

                                              Only one level of nested parameters is allowed.

                                              Control0..1*
                                              TypeBackboneElement
                                              Is Modifierfalse
                                              Must Supporttrue
                                              Summarytrue
                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                              298. Parameters.parameter:reportNames.part:table6B-Line14a.part:table6B-Line14a-num.modifierExtension
                                              Definition

                                              May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                              Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                              ShortExtensions that cannot be ignored even if unrecognized
                                              Comments

                                              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                              Control0..*
                                              TypeExtension
                                              Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                              Summarytrue
                                              Requirements

                                              Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                              Alternate Namesextensions, user content, modifiers
                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                              300. Parameters.parameter:reportNames.part:table6B-Line14a.part:table6B-Line14a-num.name
                                              Definition

                                              The name of the parameter (reference to the operation definition).

                                              ShortName from the definition
                                              Control1..1
                                              Typestring
                                              Is Modifierfalse
                                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                              Must Supporttrue
                                              Summarytrue
                                              Fixed Valuetable6B-Line14a-Preventive-Care-And-Screening-Tobacco-Use-CMS138-num
                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                              302. Parameters.parameter:reportNames.part:table6B-Line14a.part:table6B-Line14a-num.value[x]
                                              Definition

                                              If the parameter is a data type.

                                              ShortIf parameter is a data type
                                              Control10..1
                                              This element is affected by the following invariants: inv-1
                                              Typeboolean, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, Expression, Signature, unsignedInt, time
                                              [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                              Is Modifierfalse
                                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                              Must Supporttrue
                                              Summarytrue
                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                              304. Parameters.parameter:reportNames.part:table6B-Line17a
                                              Slice Nametable6B-Line17a
                                              Definition

                                              A named part of a multi-part parameter.

                                              ShortNamed part of a multi-part parameter
                                              Comments

                                              Only one level of nested parameters is allowed.

                                              Control10..1*
                                              TypeBackboneElement
                                              Is Modifierfalse
                                              Must Supporttrue
                                              Summarytrue
                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                              306. Parameters.parameter:reportNames.part:table6B-Line17a.modifierExtension
                                              Definition

                                              May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                              Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                              ShortExtensions that cannot be ignored even if unrecognized
                                              Comments

                                              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                              Control0..*
                                              TypeExtension
                                              Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                              Summarytrue
                                              Requirements

                                              Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                              Alternate Namesextensions, user content, modifiers
                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                              308. Parameters.parameter:reportNames.part:table6B-Line17a.name
                                              Definition

                                              The name of the parameter (reference to the operation definition).

                                              ShortName from the definition
                                              Control1..1
                                              Typestring
                                              Is Modifierfalse
                                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                              Must Supporttrue
                                              Summarytrue
                                              Fixed Valuetable6B-Line17a-Statin-Therapy-CMS347
                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                              310. Parameters.parameter:reportNames.part:table6B-Line17a.value[x]
                                              Definition

                                              If the parameter is a data type.

                                              ShortIf parameter is a data type
                                              Control10..1
                                              This element is affected by the following invariants: inv-1
                                              Typeboolean, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, Expression, Signature, unsignedInt, time
                                              [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                              Is Modifierfalse
                                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                              Must Supporttrue
                                              Summarytrue
                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                              312. Parameters.parameter:reportNames.part:table6B-Line17a.part
                                              Definition

                                              A named part of a multi-part parameter.

                                              ShortNamed part of a multi-part parameter
                                              Comments

                                              Only one level of nested parameters is allowed.

                                              Control0..*
                                              TypeSeettp://hl7.org/fhir/StructureDefinition/Parameters#Parameters.parameter
                                              Is Modifierfalse
                                              Must Supporttrue
                                              Summarytrue
                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                              SlicingThis element introduces a set of slices on Parameters.parameter.part.part. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                                              • value @ $this.name
                                              • 314. Parameters.parameter:reportNames.part:table6B-Line17a.part:table6B-Line17a-den
                                                Slice Nametable6B-Line17a-den
                                                Definition

                                                A named part of a multi-part parameter.

                                                ShortNamed part of a multi-part parameter
                                                Comments

                                                Only one level of nested parameters is allowed.

                                                Control0..1*
                                                TypeBackboneElement
                                                Is Modifierfalse
                                                Must Supporttrue
                                                Summarytrue
                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                316. Parameters.parameter:reportNames.part:table6B-Line17a.part:table6B-Line17a-den.modifierExtension
                                                Definition

                                                May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                                Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                                ShortExtensions that cannot be ignored even if unrecognized
                                                Comments

                                                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                Control0..*
                                                TypeExtension
                                                Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                                Summarytrue
                                                Requirements

                                                Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                                Alternate Namesextensions, user content, modifiers
                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                318. Parameters.parameter:reportNames.part:table6B-Line17a.part:table6B-Line17a-den.name
                                                Definition

                                                The name of the parameter (reference to the operation definition).

                                                ShortName from the definition
                                                Control1..1
                                                Typestring
                                                Is Modifierfalse
                                                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                Must Supporttrue
                                                Summarytrue
                                                Fixed Valuetable6B-Line17a-Statin-Therapy-CMS347-den
                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                320. Parameters.parameter:reportNames.part:table6B-Line17a.part:table6B-Line17a-den.value[x]
                                                Definition

                                                If the parameter is a data type.

                                                ShortIf parameter is a data type
                                                Control10..1
                                                This element is affected by the following invariants: inv-1
                                                Typeboolean, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, Expression, Signature, unsignedInt, time
                                                [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                                Is Modifierfalse
                                                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                Must Supporttrue
                                                Summarytrue
                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                322. Parameters.parameter:reportNames.part:table6B-Line17a.part:table6B-Line17a-denexcl
                                                Slice Nametable6B-Line17a-denexcl
                                                Definition

                                                A named part of a multi-part parameter.

                                                ShortNamed part of a multi-part parameter
                                                Comments

                                                Only one level of nested parameters is allowed.

                                                Control0..1*
                                                TypeBackboneElement
                                                Is Modifierfalse
                                                Must Supporttrue
                                                Summarytrue
                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                324. Parameters.parameter:reportNames.part:table6B-Line17a.part:table6B-Line17a-denexcl.modifierExtension
                                                Definition

                                                May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                                Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                                ShortExtensions that cannot be ignored even if unrecognized
                                                Comments

                                                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                Control0..*
                                                TypeExtension
                                                Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                                Summarytrue
                                                Requirements

                                                Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                                Alternate Namesextensions, user content, modifiers
                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                326. Parameters.parameter:reportNames.part:table6B-Line17a.part:table6B-Line17a-denexcl.name
                                                Definition

                                                The name of the parameter (reference to the operation definition).

                                                ShortName from the definition
                                                Control1..1
                                                Typestring
                                                Is Modifierfalse
                                                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                Must Supporttrue
                                                Summarytrue
                                                Fixed Valuetable6B-Line17a-Statin-Therapy-CMS347-denexcl
                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                328. Parameters.parameter:reportNames.part:table6B-Line17a.part:table6B-Line17a-denexcl.value[x]
                                                Definition

                                                If the parameter is a data type.

                                                ShortIf parameter is a data type
                                                Control10..1
                                                This element is affected by the following invariants: inv-1
                                                Typeboolean, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, Expression, Signature, unsignedInt, time
                                                [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                                Is Modifierfalse
                                                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                Must Supporttrue
                                                Summarytrue
                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                330. Parameters.parameter:reportNames.part:table6B-Line17a.part:table6B-Line17a-denexp
                                                Slice Nametable6B-Line17a-denexp
                                                Definition

                                                A named part of a multi-part parameter.

                                                ShortNamed part of a multi-part parameter
                                                Comments

                                                Only one level of nested parameters is allowed.

                                                Control0..1*
                                                TypeBackboneElement
                                                Is Modifierfalse
                                                Must Supporttrue
                                                Summarytrue
                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                332. Parameters.parameter:reportNames.part:table6B-Line17a.part:table6B-Line17a-denexp.modifierExtension
                                                Definition

                                                May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                                Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                                ShortExtensions that cannot be ignored even if unrecognized
                                                Comments

                                                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                Control0..*
                                                TypeExtension
                                                Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                                Summarytrue
                                                Requirements

                                                Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                                Alternate Namesextensions, user content, modifiers
                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                334. Parameters.parameter:reportNames.part:table6B-Line17a.part:table6B-Line17a-denexp.name
                                                Definition

                                                The name of the parameter (reference to the operation definition).

                                                ShortName from the definition
                                                Control1..1
                                                Typestring
                                                Is Modifierfalse
                                                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                Must Supporttrue
                                                Summarytrue
                                                Fixed Valuetable6B-Line17a-Statin-Therapy-CMS347-denexp
                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                336. Parameters.parameter:reportNames.part:table6B-Line17a.part:table6B-Line17a-denexp.value[x]
                                                Definition

                                                If the parameter is a data type.

                                                ShortIf parameter is a data type
                                                Control10..1
                                                This element is affected by the following invariants: inv-1
                                                Typeboolean, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, Expression, Signature, unsignedInt, time
                                                [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                                Is Modifierfalse
                                                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                Must Supporttrue
                                                Summarytrue
                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                338. Parameters.parameter:reportNames.part:table6B-Line17a.part:table6B-Line17a-num
                                                Slice Nametable6B-Line17a-num
                                                Definition

                                                A named part of a multi-part parameter.

                                                ShortNamed part of a multi-part parameter
                                                Comments

                                                Only one level of nested parameters is allowed.

                                                Control0..1*
                                                TypeBackboneElement
                                                Is Modifierfalse
                                                Must Supporttrue
                                                Summarytrue
                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                340. Parameters.parameter:reportNames.part:table6B-Line17a.part:table6B-Line17a-num.modifierExtension
                                                Definition

                                                May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                                Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                                ShortExtensions that cannot be ignored even if unrecognized
                                                Comments

                                                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                Control0..*
                                                TypeExtension
                                                Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                                Summarytrue
                                                Requirements

                                                Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                                Alternate Namesextensions, user content, modifiers
                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                342. Parameters.parameter:reportNames.part:table6B-Line17a.part:table6B-Line17a-num.name
                                                Definition

                                                The name of the parameter (reference to the operation definition).

                                                ShortName from the definition
                                                Control1..1
                                                Typestring
                                                Is Modifierfalse
                                                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                Must Supporttrue
                                                Summarytrue
                                                Fixed Valuetable6B-Line17a-Statin-Therapy-CMS347-num
                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                344. Parameters.parameter:reportNames.part:table6B-Line17a.part:table6B-Line17a-num.value[x]
                                                Definition

                                                If the parameter is a data type.

                                                ShortIf parameter is a data type
                                                Control10..1
                                                This element is affected by the following invariants: inv-1
                                                Typeboolean, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, Expression, Signature, unsignedInt, time
                                                [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                                Is Modifierfalse
                                                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                Must Supporttrue
                                                Summarytrue
                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                346. Parameters.parameter:reportNames.part:table6B-Line18
                                                Slice Nametable6B-Line18
                                                Definition

                                                A named part of a multi-part parameter.

                                                ShortNamed part of a multi-part parameter
                                                Comments

                                                Only one level of nested parameters is allowed.

                                                Control10..1*
                                                TypeBackboneElement
                                                Is Modifierfalse
                                                Must Supporttrue
                                                Summarytrue
                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                348. Parameters.parameter:reportNames.part:table6B-Line18.modifierExtension
                                                Definition

                                                May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                                Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                                ShortExtensions that cannot be ignored even if unrecognized
                                                Comments

                                                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                Control0..*
                                                TypeExtension
                                                Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                                Summarytrue
                                                Requirements

                                                Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                                Alternate Namesextensions, user content, modifiers
                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                350. Parameters.parameter:reportNames.part:table6B-Line18.name
                                                Definition

                                                The name of the parameter (reference to the operation definition).

                                                ShortName from the definition
                                                Control1..1
                                                Typestring
                                                Is Modifierfalse
                                                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                Must Supporttrue
                                                Summarytrue
                                                Fixed Valuetable6B-Line18-Ischmic-Vascular-Disease-CMS164
                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                352. Parameters.parameter:reportNames.part:table6B-Line18.value[x]
                                                Definition

                                                If the parameter is a data type.

                                                ShortIf parameter is a data type
                                                Control10..1
                                                This element is affected by the following invariants: inv-1
                                                Typeboolean, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, Expression, Signature, unsignedInt, time
                                                [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                                Is Modifierfalse
                                                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                Must Supporttrue
                                                Summarytrue
                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                354. Parameters.parameter:reportNames.part:table6B-Line18.part
                                                Definition

                                                A named part of a multi-part parameter.

                                                ShortNamed part of a multi-part parameter
                                                Comments

                                                Only one level of nested parameters is allowed.

                                                Control0..*
                                                TypeSeettp://hl7.org/fhir/StructureDefinition/Parameters#Parameters.parameter
                                                Is Modifierfalse
                                                Must Supporttrue
                                                Summarytrue
                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                SlicingThis element introduces a set of slices on Parameters.parameter.part.part. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                                                • value @ $this.name
                                                • 356. Parameters.parameter:reportNames.part:table6B-Line18.part:table6B-Line18-den
                                                  Slice Nametable6B-Line18-den
                                                  Definition

                                                  A named part of a multi-part parameter.

                                                  ShortNamed part of a multi-part parameter
                                                  Comments

                                                  Only one level of nested parameters is allowed.

                                                  Control0..1*
                                                  TypeBackboneElement
                                                  Is Modifierfalse
                                                  Must Supporttrue
                                                  Summarytrue
                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                  358. Parameters.parameter:reportNames.part:table6B-Line18.part:table6B-Line18-den.modifierExtension
                                                  Definition

                                                  May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                                  Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                                  ShortExtensions that cannot be ignored even if unrecognized
                                                  Comments

                                                  There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                  Control0..*
                                                  TypeExtension
                                                  Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                                  Summarytrue
                                                  Requirements

                                                  Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                                  Alternate Namesextensions, user content, modifiers
                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                  360. Parameters.parameter:reportNames.part:table6B-Line18.part:table6B-Line18-den.name
                                                  Definition

                                                  The name of the parameter (reference to the operation definition).

                                                  ShortName from the definition
                                                  Control1..1
                                                  Typestring
                                                  Is Modifierfalse
                                                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                  Must Supporttrue
                                                  Summarytrue
                                                  Fixed Valuetable6B-Line18-Ischmic-Vascular-Disease-CMS164-den
                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                  362. Parameters.parameter:reportNames.part:table6B-Line18.part:table6B-Line18-den.value[x]
                                                  Definition

                                                  If the parameter is a data type.

                                                  ShortIf parameter is a data type
                                                  Control10..1
                                                  This element is affected by the following invariants: inv-1
                                                  Typeboolean, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, Expression, Signature, unsignedInt, time
                                                  [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                                  Is Modifierfalse
                                                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                  Must Supporttrue
                                                  Summarytrue
                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                  364. Parameters.parameter:reportNames.part:table6B-Line18.part:table6B-Line18-denexcl
                                                  Slice Nametable6B-Line18-denexcl
                                                  Definition

                                                  A named part of a multi-part parameter.

                                                  ShortNamed part of a multi-part parameter
                                                  Comments

                                                  Only one level of nested parameters is allowed.

                                                  Control0..1*
                                                  TypeBackboneElement
                                                  Is Modifierfalse
                                                  Must Supporttrue
                                                  Summarytrue
                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                  366. Parameters.parameter:reportNames.part:table6B-Line18.part:table6B-Line18-denexcl.modifierExtension
                                                  Definition

                                                  May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                                  Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                                  ShortExtensions that cannot be ignored even if unrecognized
                                                  Comments

                                                  There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                  Control0..*
                                                  TypeExtension
                                                  Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                                  Summarytrue
                                                  Requirements

                                                  Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                                  Alternate Namesextensions, user content, modifiers
                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                  368. Parameters.parameter:reportNames.part:table6B-Line18.part:table6B-Line18-denexcl.name
                                                  Definition

                                                  The name of the parameter (reference to the operation definition).

                                                  ShortName from the definition
                                                  Control1..1
                                                  Typestring
                                                  Is Modifierfalse
                                                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                  Must Supporttrue
                                                  Summarytrue
                                                  Fixed Valuetable6B-Line18-Ischmic-Vascular-Disease-CMS164-denexcl
                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                  370. Parameters.parameter:reportNames.part:table6B-Line18.part:table6B-Line18-denexcl.value[x]
                                                  Definition

                                                  If the parameter is a data type.

                                                  ShortIf parameter is a data type
                                                  Control10..1
                                                  This element is affected by the following invariants: inv-1
                                                  Typeboolean, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, Expression, Signature, unsignedInt, time
                                                  [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                                  Is Modifierfalse
                                                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                  Must Supporttrue
                                                  Summarytrue
                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                  372. Parameters.parameter:reportNames.part:table6B-Line18.part:table6B-Line18-num
                                                  Slice Nametable6B-Line18-num
                                                  Definition

                                                  A named part of a multi-part parameter.

                                                  ShortNamed part of a multi-part parameter
                                                  Comments

                                                  Only one level of nested parameters is allowed.

                                                  Control0..1*
                                                  TypeBackboneElement
                                                  Is Modifierfalse
                                                  Must Supporttrue
                                                  Summarytrue
                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                  374. Parameters.parameter:reportNames.part:table6B-Line18.part:table6B-Line18-num.modifierExtension
                                                  Definition

                                                  May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                                  Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                                  ShortExtensions that cannot be ignored even if unrecognized
                                                  Comments

                                                  There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                  Control0..*
                                                  TypeExtension
                                                  Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                                  Summarytrue
                                                  Requirements

                                                  Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                                  Alternate Namesextensions, user content, modifiers
                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                  376. Parameters.parameter:reportNames.part:table6B-Line18.part:table6B-Line18-num.name
                                                  Definition

                                                  The name of the parameter (reference to the operation definition).

                                                  ShortName from the definition
                                                  Control1..1
                                                  Typestring
                                                  Is Modifierfalse
                                                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                  Must Supporttrue
                                                  Summarytrue
                                                  Fixed Valuetable6B-Line18-Ischmic-Vascular-Disease-CMS164-num
                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                  378. Parameters.parameter:reportNames.part:table6B-Line18.part:table6B-Line18-num.value[x]
                                                  Definition

                                                  If the parameter is a data type.

                                                  ShortIf parameter is a data type
                                                  Control10..1
                                                  This element is affected by the following invariants: inv-1
                                                  Typeboolean, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, Expression, Signature, unsignedInt, time
                                                  [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                                  Is Modifierfalse
                                                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                  Must Supporttrue
                                                  Summarytrue
                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                  380. Parameters.parameter:reportNames.part:table6B-Line19
                                                  Slice Nametable6B-Line19
                                                  Definition

                                                  A named part of a multi-part parameter.

                                                  ShortNamed part of a multi-part parameter
                                                  Comments

                                                  Only one level of nested parameters is allowed.

                                                  Control10..1*
                                                  TypeBackboneElement
                                                  Is Modifierfalse
                                                  Must Supporttrue
                                                  Summarytrue
                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                  382. Parameters.parameter:reportNames.part:table6B-Line19.modifierExtension
                                                  Definition

                                                  May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                                  Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                                  ShortExtensions that cannot be ignored even if unrecognized
                                                  Comments

                                                  There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                  Control0..*
                                                  TypeExtension
                                                  Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                                  Summarytrue
                                                  Requirements

                                                  Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                                  Alternate Namesextensions, user content, modifiers
                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                  384. Parameters.parameter:reportNames.part:table6B-Line19.name
                                                  Definition

                                                  The name of the parameter (reference to the operation definition).

                                                  ShortName from the definition
                                                  Control1..1
                                                  Typestring
                                                  Is Modifierfalse
                                                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                  Must Supporttrue
                                                  Summarytrue
                                                  Fixed Valuetable6B-Line19-Colorectal-Cancer-Screening-CMS130
                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                  386. Parameters.parameter:reportNames.part:table6B-Line19.value[x]
                                                  Definition

                                                  If the parameter is a data type.

                                                  ShortIf parameter is a data type
                                                  Control10..1
                                                  This element is affected by the following invariants: inv-1
                                                  Typeboolean, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, Expression, Signature, unsignedInt, time
                                                  [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                                  Is Modifierfalse
                                                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                  Must Supporttrue
                                                  Summarytrue
                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                  388. Parameters.parameter:reportNames.part:table6B-Line19.part
                                                  Definition

                                                  A named part of a multi-part parameter.

                                                  ShortNamed part of a multi-part parameter
                                                  Comments

                                                  Only one level of nested parameters is allowed.

                                                  Control0..*
                                                  TypeSeettp://hl7.org/fhir/StructureDefinition/Parameters#Parameters.parameter
                                                  Is Modifierfalse
                                                  Must Supporttrue
                                                  Summarytrue
                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                  SlicingThis element introduces a set of slices on Parameters.parameter.part.part. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                                                  • value @ $this.name
                                                  • 390. Parameters.parameter:reportNames.part:table6B-Line19.part:table6B-Line19-den
                                                    Slice Nametable6B-Line19-den
                                                    Definition

                                                    A named part of a multi-part parameter.

                                                    ShortNamed part of a multi-part parameter
                                                    Comments

                                                    Only one level of nested parameters is allowed.

                                                    Control0..1*
                                                    TypeBackboneElement
                                                    Is Modifierfalse
                                                    Must Supporttrue
                                                    Summarytrue
                                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                    392. Parameters.parameter:reportNames.part:table6B-Line19.part:table6B-Line19-den.modifierExtension
                                                    Definition

                                                    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                                    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                                    ShortExtensions that cannot be ignored even if unrecognized
                                                    Comments

                                                    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                    Control0..*
                                                    TypeExtension
                                                    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                                    Summarytrue
                                                    Requirements

                                                    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                                    Alternate Namesextensions, user content, modifiers
                                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                    394. Parameters.parameter:reportNames.part:table6B-Line19.part:table6B-Line19-den.name
                                                    Definition

                                                    The name of the parameter (reference to the operation definition).

                                                    ShortName from the definition
                                                    Control1..1
                                                    Typestring
                                                    Is Modifierfalse
                                                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                    Must Supporttrue
                                                    Summarytrue
                                                    Fixed Valuetable6B-Line19-Colorectal-Cancer-Screening-CMS130-den
                                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                    396. Parameters.parameter:reportNames.part:table6B-Line19.part:table6B-Line19-den.value[x]
                                                    Definition

                                                    If the parameter is a data type.

                                                    ShortIf parameter is a data type
                                                    Control10..1
                                                    This element is affected by the following invariants: inv-1
                                                    Typeboolean, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, Expression, Signature, unsignedInt, time
                                                    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                                    Is Modifierfalse
                                                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                    Must Supporttrue
                                                    Summarytrue
                                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                    398. Parameters.parameter:reportNames.part:table6B-Line19.part:table6B-Line19-denexcl
                                                    Slice Nametable6B-Line19-denexcl
                                                    Definition

                                                    A named part of a multi-part parameter.

                                                    ShortNamed part of a multi-part parameter
                                                    Comments

                                                    Only one level of nested parameters is allowed.

                                                    Control0..1*
                                                    TypeBackboneElement
                                                    Is Modifierfalse
                                                    Must Supporttrue
                                                    Summarytrue
                                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                    400. Parameters.parameter:reportNames.part:table6B-Line19.part:table6B-Line19-denexcl.modifierExtension
                                                    Definition

                                                    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                                    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                                    ShortExtensions that cannot be ignored even if unrecognized
                                                    Comments

                                                    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                    Control0..*
                                                    TypeExtension
                                                    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                                    Summarytrue
                                                    Requirements

                                                    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                                    Alternate Namesextensions, user content, modifiers
                                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                    402. Parameters.parameter:reportNames.part:table6B-Line19.part:table6B-Line19-denexcl.name
                                                    Definition

                                                    The name of the parameter (reference to the operation definition).

                                                    ShortName from the definition
                                                    Control1..1
                                                    Typestring
                                                    Is Modifierfalse
                                                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                    Must Supporttrue
                                                    Summarytrue
                                                    Fixed Valuetable6B-Line19-Colorectal-Cancer-Screening-CMS130-denexcl
                                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                    404. Parameters.parameter:reportNames.part:table6B-Line19.part:table6B-Line19-denexcl.value[x]
                                                    Definition

                                                    If the parameter is a data type.

                                                    ShortIf parameter is a data type
                                                    Control10..1
                                                    This element is affected by the following invariants: inv-1
                                                    Typeboolean, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, Expression, Signature, unsignedInt, time
                                                    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                                    Is Modifierfalse
                                                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                    Must Supporttrue
                                                    Summarytrue
                                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                    406. Parameters.parameter:reportNames.part:table6B-Line19.part:table6B-Line19-num
                                                    Slice Nametable6B-Line19-num
                                                    Definition

                                                    A named part of a multi-part parameter.

                                                    ShortNamed part of a multi-part parameter
                                                    Comments

                                                    Only one level of nested parameters is allowed.

                                                    Control0..1*
                                                    TypeBackboneElement
                                                    Is Modifierfalse
                                                    Must Supporttrue
                                                    Summarytrue
                                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                    408. Parameters.parameter:reportNames.part:table6B-Line19.part:table6B-Line19-num.modifierExtension
                                                    Definition

                                                    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                                    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                                    ShortExtensions that cannot be ignored even if unrecognized
                                                    Comments

                                                    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                    Control0..*
                                                    TypeExtension
                                                    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                                    Summarytrue
                                                    Requirements

                                                    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                                    Alternate Namesextensions, user content, modifiers
                                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                    410. Parameters.parameter:reportNames.part:table6B-Line19.part:table6B-Line19-num.name
                                                    Definition

                                                    The name of the parameter (reference to the operation definition).

                                                    ShortName from the definition
                                                    Control1..1
                                                    Typestring
                                                    Is Modifierfalse
                                                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                    Must Supporttrue
                                                    Summarytrue
                                                    Fixed Valuetable6B-Line19-Colorectal-Cancer-Screening-CMS130-num
                                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                    412. Parameters.parameter:reportNames.part:table6B-Line19.part:table6B-Line19-num.value[x]
                                                    Definition

                                                    If the parameter is a data type.

                                                    ShortIf parameter is a data type
                                                    Control10..1
                                                    This element is affected by the following invariants: inv-1
                                                    Typeboolean, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, Expression, Signature, unsignedInt, time
                                                    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                                    Is Modifierfalse
                                                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                    Must Supporttrue
                                                    Summarytrue
                                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                    414. Parameters.parameter:reportNames.part:table6B-Line20
                                                    Slice Nametable6B-Line20
                                                    Definition

                                                    A named part of a multi-part parameter.

                                                    ShortNamed part of a multi-part parameter
                                                    Comments

                                                    Only one level of nested parameters is allowed.

                                                    Control10..1*
                                                    TypeBackboneElement
                                                    Is Modifierfalse
                                                    Must Supporttrue
                                                    Summarytrue
                                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                    416. Parameters.parameter:reportNames.part:table6B-Line20.modifierExtension
                                                    Definition

                                                    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                                    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                                    ShortExtensions that cannot be ignored even if unrecognized
                                                    Comments

                                                    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                    Control0..*
                                                    TypeExtension
                                                    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                                    Summarytrue
                                                    Requirements

                                                    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                                    Alternate Namesextensions, user content, modifiers
                                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                    418. Parameters.parameter:reportNames.part:table6B-Line20.name
                                                    Definition

                                                    The name of the parameter (reference to the operation definition).

                                                    ShortName from the definition
                                                    Control1..1
                                                    Typestring
                                                    Is Modifierfalse
                                                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                    Must Supporttrue
                                                    Summarytrue
                                                    Fixed Valuetable6B-Line20-HIV-Linkage-To-Care
                                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                    420. Parameters.parameter:reportNames.part:table6B-Line20.value[x]
                                                    Definition

                                                    If the parameter is a data type.

                                                    ShortIf parameter is a data type
                                                    Control10..1
                                                    This element is affected by the following invariants: inv-1
                                                    Typeboolean, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, Expression, Signature, unsignedInt, time
                                                    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                                    Is Modifierfalse
                                                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                    Must Supporttrue
                                                    Summarytrue
                                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                    422. Parameters.parameter:reportNames.part:table6B-Line20.part
                                                    Definition

                                                    A named part of a multi-part parameter.

                                                    ShortNamed part of a multi-part parameter
                                                    Comments

                                                    Only one level of nested parameters is allowed.

                                                    Control0..*
                                                    TypeSeettp://hl7.org/fhir/StructureDefinition/Parameters#Parameters.parameter
                                                    Is Modifierfalse
                                                    Must Supporttrue
                                                    Summarytrue
                                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                    SlicingThis element introduces a set of slices on Parameters.parameter.part.part. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                                                    • value @ $this.name
                                                    • 424. Parameters.parameter:reportNames.part:table6B-Line20.part:table6B-Line20-den
                                                      Slice Nametable6B-Line20-den
                                                      Definition

                                                      A named part of a multi-part parameter.

                                                      ShortNamed part of a multi-part parameter
                                                      Comments

                                                      Only one level of nested parameters is allowed.

                                                      Control0..1*
                                                      TypeBackboneElement
                                                      Is Modifierfalse
                                                      Must Supporttrue
                                                      Summarytrue
                                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                      426. Parameters.parameter:reportNames.part:table6B-Line20.part:table6B-Line20-den.modifierExtension
                                                      Definition

                                                      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                                      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                                      ShortExtensions that cannot be ignored even if unrecognized
                                                      Comments

                                                      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                      Control0..*
                                                      TypeExtension
                                                      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                                      Summarytrue
                                                      Requirements

                                                      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                                      Alternate Namesextensions, user content, modifiers
                                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                      428. Parameters.parameter:reportNames.part:table6B-Line20.part:table6B-Line20-den.name
                                                      Definition

                                                      The name of the parameter (reference to the operation definition).

                                                      ShortName from the definition
                                                      Control1..1
                                                      Typestring
                                                      Is Modifierfalse
                                                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                      Must Supporttrue
                                                      Summarytrue
                                                      Fixed Valuetable6B-Line20-HIV-Linkage-To-Care-den
                                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                      430. Parameters.parameter:reportNames.part:table6B-Line20.part:table6B-Line20-den.value[x]
                                                      Definition

                                                      If the parameter is a data type.

                                                      ShortIf parameter is a data type
                                                      Control10..1
                                                      This element is affected by the following invariants: inv-1
                                                      Typeboolean, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, Expression, Signature, unsignedInt, time
                                                      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                                      Is Modifierfalse
                                                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                      Must Supporttrue
                                                      Summarytrue
                                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                      432. Parameters.parameter:reportNames.part:table6B-Line20.part:table6B-Line20-denexcl
                                                      Slice Nametable6B-Line20-denexcl
                                                      Definition

                                                      A named part of a multi-part parameter.

                                                      ShortNamed part of a multi-part parameter
                                                      Comments

                                                      Only one level of nested parameters is allowed.

                                                      Control0..1*
                                                      TypeBackboneElement
                                                      Is Modifierfalse
                                                      Must Supporttrue
                                                      Summarytrue
                                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                      434. Parameters.parameter:reportNames.part:table6B-Line20.part:table6B-Line20-denexcl.modifierExtension
                                                      Definition

                                                      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                                      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                                      ShortExtensions that cannot be ignored even if unrecognized
                                                      Comments

                                                      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                      Control0..*
                                                      TypeExtension
                                                      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                                      Summarytrue
                                                      Requirements

                                                      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                                      Alternate Namesextensions, user content, modifiers
                                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                      436. Parameters.parameter:reportNames.part:table6B-Line20.part:table6B-Line20-denexcl.name
                                                      Definition

                                                      The name of the parameter (reference to the operation definition).

                                                      ShortName from the definition
                                                      Control1..1
                                                      Typestring
                                                      Is Modifierfalse
                                                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                      Must Supporttrue
                                                      Summarytrue
                                                      Fixed Valuetable6B-Line20-HIV-Linkage-To-Care-denexcl
                                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                      438. Parameters.parameter:reportNames.part:table6B-Line20.part:table6B-Line20-denexcl.value[x]
                                                      Definition

                                                      If the parameter is a data type.

                                                      ShortIf parameter is a data type
                                                      Control10..1
                                                      This element is affected by the following invariants: inv-1
                                                      Typeboolean, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, Expression, Signature, unsignedInt, time
                                                      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                                      Is Modifierfalse
                                                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                      Must Supporttrue
                                                      Summarytrue
                                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                      440. Parameters.parameter:reportNames.part:table6B-Line20.part:table6B-Line20-num
                                                      Slice Nametable6B-Line20-num
                                                      Definition

                                                      A named part of a multi-part parameter.

                                                      ShortNamed part of a multi-part parameter
                                                      Comments

                                                      Only one level of nested parameters is allowed.

                                                      Control0..1*
                                                      TypeBackboneElement
                                                      Is Modifierfalse
                                                      Must Supporttrue
                                                      Summarytrue
                                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                      442. Parameters.parameter:reportNames.part:table6B-Line20.part:table6B-Line20-num.modifierExtension
                                                      Definition

                                                      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                                      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                                      ShortExtensions that cannot be ignored even if unrecognized
                                                      Comments

                                                      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                      Control0..*
                                                      TypeExtension
                                                      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                                      Summarytrue
                                                      Requirements

                                                      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                                      Alternate Namesextensions, user content, modifiers
                                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                      444. Parameters.parameter:reportNames.part:table6B-Line20.part:table6B-Line20-num.name
                                                      Definition

                                                      The name of the parameter (reference to the operation definition).

                                                      ShortName from the definition
                                                      Control1..1
                                                      Typestring
                                                      Is Modifierfalse
                                                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                      Must Supporttrue
                                                      Summarytrue
                                                      Fixed Valuetable6B-Line20-HIV-Linkage-To-Care-num
                                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                      446. Parameters.parameter:reportNames.part:table6B-Line20.part:table6B-Line20-num.value[x]
                                                      Definition

                                                      If the parameter is a data type.

                                                      ShortIf parameter is a data type
                                                      Control10..1
                                                      This element is affected by the following invariants: inv-1
                                                      Typeboolean, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, Expression, Signature, unsignedInt, time
                                                      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                                      Is Modifierfalse
                                                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                      Must Supporttrue
                                                      Summarytrue
                                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                      448. Parameters.parameter:reportNames.part:table6B-Line20a
                                                      Slice Nametable6B-Line20a
                                                      Definition

                                                      A named part of a multi-part parameter.

                                                      ShortNamed part of a multi-part parameter
                                                      Comments

                                                      Only one level of nested parameters is allowed.

                                                      Control10..1*
                                                      TypeBackboneElement
                                                      Is Modifierfalse
                                                      Must Supporttrue
                                                      Summarytrue
                                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                      450. Parameters.parameter:reportNames.part:table6B-Line20a.modifierExtension
                                                      Definition

                                                      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                                      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                                      ShortExtensions that cannot be ignored even if unrecognized
                                                      Comments

                                                      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                      Control0..*
                                                      TypeExtension
                                                      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                                      Summarytrue
                                                      Requirements

                                                      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                                      Alternate Namesextensions, user content, modifiers
                                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                      452. Parameters.parameter:reportNames.part:table6B-Line20a.name
                                                      Definition

                                                      The name of the parameter (reference to the operation definition).

                                                      ShortName from the definition
                                                      Control1..1
                                                      Typestring
                                                      Is Modifierfalse
                                                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                      Must Supporttrue
                                                      Summarytrue
                                                      Fixed Valuetable6B-Line20a-HIV-Screening-CMS349
                                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                      454. Parameters.parameter:reportNames.part:table6B-Line20a.value[x]
                                                      Definition

                                                      If the parameter is a data type.

                                                      ShortIf parameter is a data type
                                                      Control10..1
                                                      This element is affected by the following invariants: inv-1
                                                      Typeboolean, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, Expression, Signature, unsignedInt, time
                                                      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                                      Is Modifierfalse
                                                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                      Must Supporttrue
                                                      Summarytrue
                                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                      456. Parameters.parameter:reportNames.part:table6B-Line20a.part
                                                      Definition

                                                      A named part of a multi-part parameter.

                                                      ShortNamed part of a multi-part parameter
                                                      Comments

                                                      Only one level of nested parameters is allowed.

                                                      Control0..*
                                                      TypeSeettp://hl7.org/fhir/StructureDefinition/Parameters#Parameters.parameter
                                                      Is Modifierfalse
                                                      Must Supporttrue
                                                      Summarytrue
                                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                      SlicingThis element introduces a set of slices on Parameters.parameter.part.part. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                                                      • value @ $this.name
                                                      • 458. Parameters.parameter:reportNames.part:table6B-Line20a.part:table6B-Line20a-den
                                                        Slice Nametable6B-Line20a-den
                                                        Definition

                                                        A named part of a multi-part parameter.

                                                        ShortNamed part of a multi-part parameter
                                                        Comments

                                                        Only one level of nested parameters is allowed.

                                                        Control0..1*
                                                        TypeBackboneElement
                                                        Is Modifierfalse
                                                        Must Supporttrue
                                                        Summarytrue
                                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                        460. Parameters.parameter:reportNames.part:table6B-Line20a.part:table6B-Line20a-den.modifierExtension
                                                        Definition

                                                        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                                        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                                        ShortExtensions that cannot be ignored even if unrecognized
                                                        Comments

                                                        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                        Control0..*
                                                        TypeExtension
                                                        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                                        Summarytrue
                                                        Requirements

                                                        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                                        Alternate Namesextensions, user content, modifiers
                                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                        462. Parameters.parameter:reportNames.part:table6B-Line20a.part:table6B-Line20a-den.name
                                                        Definition

                                                        The name of the parameter (reference to the operation definition).

                                                        ShortName from the definition
                                                        Control1..1
                                                        Typestring
                                                        Is Modifierfalse
                                                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                        Must Supporttrue
                                                        Summarytrue
                                                        Fixed Valuetable6B-Line20a-HIV-Screening-CMS349-den
                                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                        464. Parameters.parameter:reportNames.part:table6B-Line20a.part:table6B-Line20a-den.value[x]
                                                        Definition

                                                        If the parameter is a data type.

                                                        ShortIf parameter is a data type
                                                        Control10..1
                                                        This element is affected by the following invariants: inv-1
                                                        Typeboolean, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, Expression, Signature, unsignedInt, time
                                                        [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                                        Is Modifierfalse
                                                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                        Must Supporttrue
                                                        Summarytrue
                                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                        466. Parameters.parameter:reportNames.part:table6B-Line20a.part:table6B-Line20a-denexcl
                                                        Slice Nametable6B-Line20a-denexcl
                                                        Definition

                                                        A named part of a multi-part parameter.

                                                        ShortNamed part of a multi-part parameter
                                                        Comments

                                                        Only one level of nested parameters is allowed.

                                                        Control0..1*
                                                        TypeBackboneElement
                                                        Is Modifierfalse
                                                        Must Supporttrue
                                                        Summarytrue
                                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                        468. Parameters.parameter:reportNames.part:table6B-Line20a.part:table6B-Line20a-denexcl.modifierExtension
                                                        Definition

                                                        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                                        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                                        ShortExtensions that cannot be ignored even if unrecognized
                                                        Comments

                                                        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                        Control0..*
                                                        TypeExtension
                                                        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                                        Summarytrue
                                                        Requirements

                                                        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                                        Alternate Namesextensions, user content, modifiers
                                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                        470. Parameters.parameter:reportNames.part:table6B-Line20a.part:table6B-Line20a-denexcl.name
                                                        Definition

                                                        The name of the parameter (reference to the operation definition).

                                                        ShortName from the definition
                                                        Control1..1
                                                        Typestring
                                                        Is Modifierfalse
                                                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                        Must Supporttrue
                                                        Summarytrue
                                                        Fixed Valuetable6B-Line20a-HIV-Screening-CMS349-denexcl
                                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                        472. Parameters.parameter:reportNames.part:table6B-Line20a.part:table6B-Line20a-denexcl.value[x]
                                                        Definition

                                                        If the parameter is a data type.

                                                        ShortIf parameter is a data type
                                                        Control10..1
                                                        This element is affected by the following invariants: inv-1
                                                        Typeboolean, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, Expression, Signature, unsignedInt, time
                                                        [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                                        Is Modifierfalse
                                                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                        Must Supporttrue
                                                        Summarytrue
                                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                        474. Parameters.parameter:reportNames.part:table6B-Line20a.part:table6B-Line20a-num
                                                        Slice Nametable6B-Line20a-num
                                                        Definition

                                                        A named part of a multi-part parameter.

                                                        ShortNamed part of a multi-part parameter
                                                        Comments

                                                        Only one level of nested parameters is allowed.

                                                        Control0..1*
                                                        TypeBackboneElement
                                                        Is Modifierfalse
                                                        Must Supporttrue
                                                        Summarytrue
                                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                        476. Parameters.parameter:reportNames.part:table6B-Line20a.part:table6B-Line20a-num.modifierExtension
                                                        Definition

                                                        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                                        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                                        ShortExtensions that cannot be ignored even if unrecognized
                                                        Comments

                                                        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                        Control0..*
                                                        TypeExtension
                                                        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                                        Summarytrue
                                                        Requirements

                                                        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                                        Alternate Namesextensions, user content, modifiers
                                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                        478. Parameters.parameter:reportNames.part:table6B-Line20a.part:table6B-Line20a-num.name
                                                        Definition

                                                        The name of the parameter (reference to the operation definition).

                                                        ShortName from the definition
                                                        Control1..1
                                                        Typestring
                                                        Is Modifierfalse
                                                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                        Must Supporttrue
                                                        Summarytrue
                                                        Fixed Valuetable6B-Line20a-HIV-Screening-CMS349-num
                                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                        480. Parameters.parameter:reportNames.part:table6B-Line20a.part:table6B-Line20a-num.value[x]
                                                        Definition

                                                        If the parameter is a data type.

                                                        ShortIf parameter is a data type
                                                        Control10..1
                                                        This element is affected by the following invariants: inv-1
                                                        Typeboolean, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, Expression, Signature, unsignedInt, time
                                                        [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                                        Is Modifierfalse
                                                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                        Must Supporttrue
                                                        Summarytrue
                                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                        482. Parameters.parameter:reportNames.part:table6B-Line21
                                                        Slice Nametable6B-Line21
                                                        Definition

                                                        A named part of a multi-part parameter.

                                                        ShortNamed part of a multi-part parameter
                                                        Comments

                                                        Only one level of nested parameters is allowed.

                                                        Control10..1*
                                                        TypeBackboneElement
                                                        Is Modifierfalse
                                                        Must Supporttrue
                                                        Summarytrue
                                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                        484. Parameters.parameter:reportNames.part:table6B-Line21.modifierExtension
                                                        Definition

                                                        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                                        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                                        ShortExtensions that cannot be ignored even if unrecognized
                                                        Comments

                                                        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                        Control0..*
                                                        TypeExtension
                                                        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                                        Summarytrue
                                                        Requirements

                                                        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                                        Alternate Namesextensions, user content, modifiers
                                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                        486. Parameters.parameter:reportNames.part:table6B-Line21.name
                                                        Definition

                                                        The name of the parameter (reference to the operation definition).

                                                        ShortName from the definition
                                                        Control1..1
                                                        Typestring
                                                        Is Modifierfalse
                                                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                        Must Supporttrue
                                                        Summarytrue
                                                        Fixed Valuetable6B-Line21-Preventive-Care-And-Screening-For-Depression-CMS2
                                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                        488. Parameters.parameter:reportNames.part:table6B-Line21.value[x]
                                                        Definition

                                                        If the parameter is a data type.

                                                        ShortIf parameter is a data type
                                                        Control10..1
                                                        This element is affected by the following invariants: inv-1
                                                        Typeboolean, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, Expression, Signature, unsignedInt, time
                                                        [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                                        Is Modifierfalse
                                                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                        Must Supporttrue
                                                        Summarytrue
                                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                        490. Parameters.parameter:reportNames.part:table6B-Line21.part
                                                        Definition

                                                        A named part of a multi-part parameter.

                                                        ShortNamed part of a multi-part parameter
                                                        Comments

                                                        Only one level of nested parameters is allowed.

                                                        Control0..*
                                                        TypeSeettp://hl7.org/fhir/StructureDefinition/Parameters#Parameters.parameter
                                                        Is Modifierfalse
                                                        Must Supporttrue
                                                        Summarytrue
                                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                        SlicingThis element introduces a set of slices on Parameters.parameter.part.part. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                                                        • value @ $this.name
                                                        • 492. Parameters.parameter:reportNames.part:table6B-Line21.part:table6B-Line21-den
                                                          Slice Nametable6B-Line21-den
                                                          Definition

                                                          A named part of a multi-part parameter.

                                                          ShortNamed part of a multi-part parameter
                                                          Comments

                                                          Only one level of nested parameters is allowed.

                                                          Control0..1*
                                                          TypeBackboneElement
                                                          Is Modifierfalse
                                                          Must Supporttrue
                                                          Summarytrue
                                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                          494. Parameters.parameter:reportNames.part:table6B-Line21.part:table6B-Line21-den.modifierExtension
                                                          Definition

                                                          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                                          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                                          ShortExtensions that cannot be ignored even if unrecognized
                                                          Comments

                                                          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                          Control0..*
                                                          TypeExtension
                                                          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                                          Summarytrue
                                                          Requirements

                                                          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                                          Alternate Namesextensions, user content, modifiers
                                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                          496. Parameters.parameter:reportNames.part:table6B-Line21.part:table6B-Line21-den.name
                                                          Definition

                                                          The name of the parameter (reference to the operation definition).

                                                          ShortName from the definition
                                                          Control1..1
                                                          Typestring
                                                          Is Modifierfalse
                                                          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                          Must Supporttrue
                                                          Summarytrue
                                                          Fixed Valuetable6B-Line20a-HIV-Screening-CMS349-den
                                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                          498. Parameters.parameter:reportNames.part:table6B-Line21.part:table6B-Line21-den.value[x]
                                                          Definition

                                                          If the parameter is a data type.

                                                          ShortIf parameter is a data type
                                                          Control10..1
                                                          This element is affected by the following invariants: inv-1
                                                          Typeboolean, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, Expression, Signature, unsignedInt, time
                                                          [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                                          Is Modifierfalse
                                                          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                          Must Supporttrue
                                                          Summarytrue
                                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                          500. Parameters.parameter:reportNames.part:table6B-Line21.part:table6B-Line21-denexcl
                                                          Slice Nametable6B-Line21-denexcl
                                                          Definition

                                                          A named part of a multi-part parameter.

                                                          ShortNamed part of a multi-part parameter
                                                          Comments

                                                          Only one level of nested parameters is allowed.

                                                          Control0..1*
                                                          TypeBackboneElement
                                                          Is Modifierfalse
                                                          Must Supporttrue
                                                          Summarytrue
                                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                          502. Parameters.parameter:reportNames.part:table6B-Line21.part:table6B-Line21-denexcl.modifierExtension
                                                          Definition

                                                          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                                          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                                          ShortExtensions that cannot be ignored even if unrecognized
                                                          Comments

                                                          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                          Control0..*
                                                          TypeExtension
                                                          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                                          Summarytrue
                                                          Requirements

                                                          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                                          Alternate Namesextensions, user content, modifiers
                                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                          504. Parameters.parameter:reportNames.part:table6B-Line21.part:table6B-Line21-denexcl.name
                                                          Definition

                                                          The name of the parameter (reference to the operation definition).

                                                          ShortName from the definition
                                                          Control1..1
                                                          Typestring
                                                          Is Modifierfalse
                                                          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                          Must Supporttrue
                                                          Summarytrue
                                                          Fixed Valuetable6B-Line20a-HIV-Screening-CMS349-denexcl
                                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                          506. Parameters.parameter:reportNames.part:table6B-Line21.part:table6B-Line21-denexcl.value[x]
                                                          Definition

                                                          If the parameter is a data type.

                                                          ShortIf parameter is a data type
                                                          Control10..1
                                                          This element is affected by the following invariants: inv-1
                                                          Typeboolean, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, Expression, Signature, unsignedInt, time
                                                          [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                                          Is Modifierfalse
                                                          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                          Must Supporttrue
                                                          Summarytrue
                                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                          508. Parameters.parameter:reportNames.part:table6B-Line21.part:table6B-Line21-num
                                                          Slice Nametable6B-Line21-num
                                                          Definition

                                                          A named part of a multi-part parameter.

                                                          ShortNamed part of a multi-part parameter
                                                          Comments

                                                          Only one level of nested parameters is allowed.

                                                          Control0..1*
                                                          TypeBackboneElement
                                                          Is Modifierfalse
                                                          Must Supporttrue
                                                          Summarytrue
                                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                          510. Parameters.parameter:reportNames.part:table6B-Line21.part:table6B-Line21-num.modifierExtension
                                                          Definition

                                                          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                                          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                                          ShortExtensions that cannot be ignored even if unrecognized
                                                          Comments

                                                          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                          Control0..*
                                                          TypeExtension
                                                          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                                          Summarytrue
                                                          Requirements

                                                          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                                          Alternate Namesextensions, user content, modifiers
                                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                          512. Parameters.parameter:reportNames.part:table6B-Line21.part:table6B-Line21-num.name
                                                          Definition

                                                          The name of the parameter (reference to the operation definition).

                                                          ShortName from the definition
                                                          Control1..1
                                                          Typestring
                                                          Is Modifierfalse
                                                          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                          Must Supporttrue
                                                          Summarytrue
                                                          Fixed Valuetable6B-Line20a-HIV-Screening-CMS349-num
                                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                          514. Parameters.parameter:reportNames.part:table6B-Line21.part:table6B-Line21-num.value[x]
                                                          Definition

                                                          If the parameter is a data type.

                                                          ShortIf parameter is a data type
                                                          Control10..1
                                                          This element is affected by the following invariants: inv-1
                                                          Typeboolean, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, Expression, Signature, unsignedInt, time
                                                          [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                                          Is Modifierfalse
                                                          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                          Must Supporttrue
                                                          Summarytrue
                                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                          516. Parameters.parameter:reportNames.part:table6B-Line21a
                                                          Slice Nametable6B-Line21a
                                                          Definition

                                                          A named part of a multi-part parameter.

                                                          ShortNamed part of a multi-part parameter
                                                          Comments

                                                          Only one level of nested parameters is allowed.

                                                          Control10..1*
                                                          TypeBackboneElement
                                                          Is Modifierfalse
                                                          Must Supporttrue
                                                          Summarytrue
                                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                          518. Parameters.parameter:reportNames.part:table6B-Line21a.modifierExtension
                                                          Definition

                                                          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                                          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                                          ShortExtensions that cannot be ignored even if unrecognized
                                                          Comments

                                                          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                          Control0..*
                                                          TypeExtension
                                                          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                                          Summarytrue
                                                          Requirements

                                                          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                                          Alternate Namesextensions, user content, modifiers
                                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                          520. Parameters.parameter:reportNames.part:table6B-Line21a.name
                                                          Definition

                                                          The name of the parameter (reference to the operation definition).

                                                          ShortName from the definition
                                                          Control1..1
                                                          Typestring
                                                          Is Modifierfalse
                                                          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                          Must Supporttrue
                                                          Summarytrue
                                                          Fixed Valuetable6B-Line21a-Depression-Remission-At-Twelve-Months-CMS159
                                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                          522. Parameters.parameter:reportNames.part:table6B-Line21a.value[x]
                                                          Definition

                                                          If the parameter is a data type.

                                                          ShortIf parameter is a data type
                                                          Control10..1
                                                          This element is affected by the following invariants: inv-1
                                                          Typeboolean, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, Expression, Signature, unsignedInt, time
                                                          [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                                          Is Modifierfalse
                                                          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                          Must Supporttrue
                                                          Summarytrue
                                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                          524. Parameters.parameter:reportNames.part:table6B-Line22
                                                          Slice Nametable6B-Line22
                                                          Definition

                                                          A named part of a multi-part parameter.

                                                          ShortNamed part of a multi-part parameter
                                                          Comments

                                                          Only one level of nested parameters is allowed.

                                                          Control10..1*
                                                          TypeBackboneElement
                                                          Is Modifierfalse
                                                          Must Supporttrue
                                                          Summarytrue
                                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                          526. Parameters.parameter:reportNames.part:table6B-Line22.modifierExtension
                                                          Definition

                                                          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                                          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                                          ShortExtensions that cannot be ignored even if unrecognized
                                                          Comments

                                                          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                          Control0..*
                                                          TypeExtension
                                                          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                                          Summarytrue
                                                          Requirements

                                                          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                                          Alternate Namesextensions, user content, modifiers
                                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                          528. Parameters.parameter:reportNames.part:table6B-Line22.name
                                                          Definition

                                                          The name of the parameter (reference to the operation definition).

                                                          ShortName from the definition
                                                          Control1..1
                                                          Typestring
                                                          Is Modifierfalse
                                                          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                          Must Supporttrue
                                                          Summarytrue
                                                          Fixed Valuetable6B-Line22-Dental-Sealants-For-Children-CMS277
                                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                          530. Parameters.parameter:reportNames.part:table6B-Line22.value[x]
                                                          Definition

                                                          If the parameter is a data type.

                                                          ShortIf parameter is a data type
                                                          Control10..1
                                                          This element is affected by the following invariants: inv-1
                                                          Typeboolean, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, Expression, Signature, unsignedInt, time
                                                          [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                                          Is Modifierfalse
                                                          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                          Must Supporttrue
                                                          Summarytrue
                                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                          532. Parameters.parameter:reportNames.part:table7-Line0
                                                          Slice Nametable7-Line0
                                                          Definition

                                                          A named part of a multi-part parameter.

                                                          ShortNamed part of a multi-part parameter
                                                          Comments

                                                          Only one level of nested parameters is allowed.

                                                          Control10..1*
                                                          TypeBackboneElement
                                                          Is Modifierfalse
                                                          Must Supporttrue
                                                          Summarytrue
                                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                          534. Parameters.parameter:reportNames.part:table7-Line0.modifierExtension
                                                          Definition

                                                          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                                          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                                          ShortExtensions that cannot be ignored even if unrecognized
                                                          Comments

                                                          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                          Control0..*
                                                          TypeExtension
                                                          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                                          Summarytrue
                                                          Requirements

                                                          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                                          Alternate Namesextensions, user content, modifiers
                                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                          536. Parameters.parameter:reportNames.part:table7-Line0.name
                                                          Definition

                                                          The name of the parameter (reference to the operation definition).

                                                          ShortName from the definition
                                                          Control1..1
                                                          Typestring
                                                          Is Modifierfalse
                                                          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                          Must Supporttrue
                                                          Summarytrue
                                                          Fixed Valuetable7-Line0-HIV-Positive-Pregnant-Patients
                                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                          538. Parameters.parameter:reportNames.part:table7-Line0.value[x]
                                                          Definition

                                                          If the parameter is a data type.

                                                          ShortIf parameter is a data type
                                                          Control10..1
                                                          This element is affected by the following invariants: inv-1
                                                          Typeboolean, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, Expression, Signature, unsignedInt, time
                                                          [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                                          Is Modifierfalse
                                                          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                          Must Supporttrue
                                                          Summarytrue
                                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                          540. Parameters.parameter:reportNames.part:table7-Line2
                                                          Slice Nametable7-Line2
                                                          Definition

                                                          A named part of a multi-part parameter.

                                                          ShortNamed part of a multi-part parameter
                                                          Comments

                                                          Only one level of nested parameters is allowed.

                                                          Control10..1*
                                                          TypeBackboneElement
                                                          Is Modifierfalse
                                                          Must Supporttrue
                                                          Summarytrue
                                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                          542. Parameters.parameter:reportNames.part:table7-Line2.modifierExtension
                                                          Definition

                                                          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                                          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                                          ShortExtensions that cannot be ignored even if unrecognized
                                                          Comments

                                                          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                          Control0..*
                                                          TypeExtension
                                                          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                                          Summarytrue
                                                          Requirements

                                                          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                                          Alternate Namesextensions, user content, modifiers
                                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                          544. Parameters.parameter:reportNames.part:table7-Line2.name
                                                          Definition

                                                          The name of the parameter (reference to the operation definition).

                                                          ShortName from the definition
                                                          Control1..1
                                                          Typestring
                                                          Is Modifierfalse
                                                          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                          Must Supporttrue
                                                          Summarytrue
                                                          Fixed Valuetable7-Line2-Deliveries-Performed-By-Health-Center
                                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                          546. Parameters.parameter:reportNames.part:table7-Line2.value[x]
                                                          Definition

                                                          If the parameter is a data type.

                                                          ShortIf parameter is a data type
                                                          Control10..1
                                                          This element is affected by the following invariants: inv-1
                                                          Typeboolean, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, Expression, Signature, unsignedInt, time
                                                          [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                                          Is Modifierfalse
                                                          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                          Must Supporttrue
                                                          Summarytrue
                                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                          548. Parameters.parameter:reportNames.part:table7-Line1a-d
                                                          Slice Nametable7-Line1a-d
                                                          Definition

                                                          A named part of a multi-part parameter.

                                                          ShortNamed part of a multi-part parameter
                                                          Comments

                                                          Only one level of nested parameters is allowed.

                                                          Control10..1*
                                                          TypeBackboneElement
                                                          Is Modifierfalse
                                                          Must Supporttrue
                                                          Summarytrue
                                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                          550. Parameters.parameter:reportNames.part:table7-Line1a-d.modifierExtension
                                                          Definition

                                                          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                                          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                                          ShortExtensions that cannot be ignored even if unrecognized
                                                          Comments

                                                          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                          Control0..*
                                                          TypeExtension
                                                          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                                          Summarytrue
                                                          Requirements

                                                          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                                          Alternate Namesextensions, user content, modifiers
                                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                          552. Parameters.parameter:reportNames.part:table7-Line1a-d.name
                                                          Definition

                                                          The name of the parameter (reference to the operation definition).

                                                          ShortName from the definition
                                                          Control1..1
                                                          Typestring
                                                          Is Modifierfalse
                                                          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                          Must Supporttrue
                                                          Summarytrue
                                                          Fixed Valuetable7-Line1a-d-Prenatal-Care-Patient-Deliveries
                                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                          554. Parameters.parameter:reportNames.part:table7-Line1a-d.value[x]
                                                          Definition

                                                          If the parameter is a data type.

                                                          ShortIf parameter is a data type
                                                          Control10..1
                                                          This element is affected by the following invariants: inv-1
                                                          Typeboolean, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, Expression, Signature, unsignedInt, time
                                                          [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                                          Is Modifierfalse
                                                          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                          Must Supporttrue
                                                          Summarytrue
                                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                          556. Parameters.parameter:reportNames.part:table7-Line2a-c
                                                          Slice Nametable7-Line2a-c
                                                          Definition

                                                          A named part of a multi-part parameter.

                                                          ShortNamed part of a multi-part parameter
                                                          Comments

                                                          Only one level of nested parameters is allowed.

                                                          Control10..1*
                                                          TypeBackboneElement
                                                          Is Modifierfalse
                                                          Must Supporttrue
                                                          Summarytrue
                                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                          558. Parameters.parameter:reportNames.part:table7-Line2a-c.modifierExtension
                                                          Definition

                                                          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                                          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                                          ShortExtensions that cannot be ignored even if unrecognized
                                                          Comments

                                                          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                          Control0..*
                                                          TypeExtension
                                                          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                                          Summarytrue
                                                          Requirements

                                                          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                                          Alternate Namesextensions, user content, modifiers
                                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                          560. Parameters.parameter:reportNames.part:table7-Line2a-c.name
                                                          Definition

                                                          The name of the parameter (reference to the operation definition).

                                                          ShortName from the definition
                                                          Control1..1
                                                          Typestring
                                                          Is Modifierfalse
                                                          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                          Must Supporttrue
                                                          Summarytrue
                                                          Fixed Valuetable7-Line2a-c-Controlling-High-Blood-Pressure-CMS165
                                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                          562. Parameters.parameter:reportNames.part:table7-Line2a-c.value[x]
                                                          Definition

                                                          If the parameter is a data type.

                                                          ShortIf parameter is a data type
                                                          Control10..1
                                                          This element is affected by the following invariants: inv-1
                                                          Typeboolean, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, Expression, Signature, unsignedInt, time
                                                          [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                                          Is Modifierfalse
                                                          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                          Must Supporttrue
                                                          Summarytrue
                                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                          564. Parameters.parameter:reportNames.part:table7-Line3a-f
                                                          Slice Nametable7-Line3a-f
                                                          Definition

                                                          A named part of a multi-part parameter.

                                                          ShortNamed part of a multi-part parameter
                                                          Comments

                                                          Only one level of nested parameters is allowed.

                                                          Control10..1*
                                                          TypeBackboneElement
                                                          Is Modifierfalse
                                                          Must Supporttrue
                                                          Summarytrue
                                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                          566. Parameters.parameter:reportNames.part:table7-Line3a-f.modifierExtension
                                                          Definition

                                                          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                                          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                                          ShortExtensions that cannot be ignored even if unrecognized
                                                          Comments

                                                          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                          Control0..*
                                                          TypeExtension
                                                          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                                          Summarytrue
                                                          Requirements

                                                          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                                          Alternate Namesextensions, user content, modifiers
                                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                          568. Parameters.parameter:reportNames.part:table7-Line3a-f.name
                                                          Definition

                                                          The name of the parameter (reference to the operation definition).

                                                          ShortName from the definition
                                                          Control1..1
                                                          Typestring
                                                          Is Modifierfalse
                                                          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                          Must Supporttrue
                                                          Summarytrue
                                                          Fixed Valuetable7-Line3a-f-HbA1c-Poor-Control-CMS122
                                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                          570. Parameters.parameter:reportNames.part:table7-Line3a-f.value[x]
                                                          Definition

                                                          If the parameter is a data type.

                                                          ShortIf parameter is a data type
                                                          Control10..1
                                                          This element is affected by the following invariants: inv-1
                                                          Typeboolean, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, Expression, Signature, unsignedInt, time
                                                          [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                                          Is Modifierfalse
                                                          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                          Must Supporttrue
                                                          Summarytrue
                                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

                                                          Guidance on how to interpret the contents of this table can be found here

                                                          0. Parameters
                                                          Definition

                                                          The UDS+ profile is based on the **Parameters FHIR Resource and establishes the core elements, extensions, vocabularies and value sets for representing the Patients and if they are counted for the various reports.

                                                          ShortUDS Plus Patient Reporting Parameters
                                                          Comments

                                                          The parameters that may be used are defined by the OperationDefinition resource.

                                                          Control0..*
                                                          Is Modifierfalse
                                                          Summaryfalse
                                                          2. Parameters.id
                                                          Definition

                                                          The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

                                                          ShortLogical id of this artifact
                                                          Comments

                                                          The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

                                                          Control0..1
                                                          Typeid
                                                          Is Modifierfalse
                                                          Summarytrue
                                                          4. Parameters.meta
                                                          Definition

                                                          The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

                                                          ShortMetadata about the resource
                                                          Control0..1
                                                          TypeMeta
                                                          Is Modifierfalse
                                                          Summarytrue
                                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                          6. Parameters.implicitRules
                                                          Definition

                                                          A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

                                                          ShortA set of rules under which this content was created
                                                          Comments

                                                          Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

                                                          Control0..1
                                                          Typeuri
                                                          Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
                                                          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                          Summarytrue
                                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                          8. Parameters.language
                                                          Definition

                                                          The base language in which the resource is written.

                                                          ShortLanguage of the resource content
                                                          Comments

                                                          Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

                                                          Control0..1
                                                          BindingThe codes SHOULD be taken from CommonLanguages
                                                          (preferred to http://hl7.org/fhir/ValueSet/languages)

                                                          A human language.

                                                          Additional BindingsPurpose
                                                          AllLanguagesMax Binding
                                                          Typecode
                                                          Is Modifierfalse
                                                          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                          Summaryfalse
                                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                          10. Parameters.parameter
                                                          Definition

                                                          A parameter passed to or received from the operation.

                                                          ShortOperation Parameter
                                                          Control2..*
                                                          TypeBackboneElement
                                                          Is Modifierfalse
                                                          Must Supporttrue
                                                          Summarytrue
                                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                          inv-1: A parameter must have one and only one of (value, resource, part) ((part.exists() and value.empty() and resource.empty()) or (part.empty() and (value.exists() xor resource.exists())))
                                                          SlicingThis element introduces a set of slices on Parameters.parameter. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                                                          • value @ $this.name
                                                          • 12. Parameters.parameter.id
                                                            Definition

                                                            Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                                            ShortUnique id for inter-element referencing
                                                            Control0..1
                                                            Typestring
                                                            Is Modifierfalse
                                                            XML FormatIn the XML format, this property is represented as an attribute.
                                                            Summaryfalse
                                                            14. Parameters.parameter.extension
                                                            Definition

                                                            May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                                            ShortAdditional content defined by implementations
                                                            Comments

                                                            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                            Control0..*
                                                            TypeExtension
                                                            Is Modifierfalse
                                                            Summaryfalse
                                                            Alternate Namesextensions, user content
                                                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                            16. Parameters.parameter.modifierExtension
                                                            Definition

                                                            May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                                            Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                                            ShortExtensions that cannot be ignored even if unrecognized
                                                            Comments

                                                            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                            Control0..*
                                                            TypeExtension
                                                            Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                                            Summarytrue
                                                            Requirements

                                                            Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                                            Alternate Namesextensions, user content, modifiers
                                                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                            18. Parameters.parameter.name
                                                            Definition

                                                            The name of the parameter (reference to the operation definition).

                                                            ShortName from the definition
                                                            Control1..1
                                                            Typestring
                                                            Is Modifierfalse
                                                            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                            Summarytrue
                                                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                            20. Parameters.parameter.value[x]
                                                            Definition

                                                            If the parameter is a data type.

                                                            ShortIf parameter is a data type
                                                            Control0..1
                                                            This element is affected by the following invariants: inv-1
                                                            TypeChoice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta
                                                            [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                                            Is Modifierfalse
                                                            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                            Summarytrue
                                                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                            22. Parameters.parameter.resource
                                                            Definition

                                                            If the parameter is a whole resource.

                                                            ShortIf parameter is a whole resource
                                                            Comments

                                                            When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods.

                                                            Control0..1
                                                            This element is affected by the following invariants: inv-1
                                                            TypeResource
                                                            Is Modifierfalse
                                                            Summarytrue
                                                            24. Parameters.parameter.part
                                                            Definition

                                                            A named part of a multi-part parameter.

                                                            ShortNamed part of a multi-part parameter
                                                            Comments

                                                            Only one level of nested parameters is allowed.

                                                            Control0..*
                                                            TypeSeettp://hl7.org/fhir/StructureDefinition/Parameters#Parameters.parameter
                                                            Is Modifierfalse
                                                            Summarytrue
                                                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                            26. Parameters.parameter:patientReference
                                                            Slice NamepatientReference
                                                            Definition

                                                            A parameter passed to or received from the operation.

                                                            ShortOperation Parameter
                                                            Control1..1
                                                            TypeBackboneElement
                                                            Is Modifierfalse
                                                            Must Supporttrue
                                                            Summarytrue
                                                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                            inv-1: A parameter must have one and only one of (value, resource, part) ((part.exists() and value.empty() and resource.empty()) or (part.empty() and (value.exists() xor resource.exists())))
                                                            28. Parameters.parameter:patientReference.id
                                                            Definition

                                                            Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                                            ShortUnique id for inter-element referencing
                                                            Control0..1
                                                            Typestring
                                                            Is Modifierfalse
                                                            XML FormatIn the XML format, this property is represented as an attribute.
                                                            Summaryfalse
                                                            30. Parameters.parameter:patientReference.extension
                                                            Definition

                                                            May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                                            ShortAdditional content defined by implementations
                                                            Comments

                                                            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                            Control0..*
                                                            TypeExtension
                                                            Is Modifierfalse
                                                            Summaryfalse
                                                            Alternate Namesextensions, user content
                                                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                            32. Parameters.parameter:patientReference.modifierExtension
                                                            Definition

                                                            May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                                            Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                                            ShortExtensions that cannot be ignored even if unrecognized
                                                            Comments

                                                            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                            Control0..*
                                                            TypeExtension
                                                            Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                                            Summarytrue
                                                            Requirements

                                                            Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                                            Alternate Namesextensions, user content, modifiers
                                                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                            34. Parameters.parameter:patientReference.name
                                                            Definition

                                                            The name of the parameter (reference to the operation definition).

                                                            ShortName from the definition
                                                            Control1..1
                                                            Typestring
                                                            Is Modifierfalse
                                                            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                            Must Supporttrue
                                                            Summarytrue
                                                            Fixed ValuepatientReference
                                                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                            36. Parameters.parameter:patientReference.value[x]
                                                            Definition

                                                            If the parameter is a data type.

                                                            ShortIf parameter is a data type
                                                            Control1..1
                                                            This element is affected by the following invariants: inv-1
                                                            TypeReference
                                                            [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                                            Is Modifierfalse
                                                            Must Supporttrue
                                                            Summarytrue
                                                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                            38. Parameters.parameter:patientReference.value[x].id
                                                            Definition

                                                            Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                                            ShortUnique id for inter-element referencing
                                                            Control0..1
                                                            Typestring
                                                            Is Modifierfalse
                                                            XML FormatIn the XML format, this property is represented as an attribute.
                                                            Summaryfalse
                                                            40. Parameters.parameter:patientReference.value[x].extension
                                                            Definition

                                                            May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                                            ShortAdditional content defined by implementations
                                                            Comments

                                                            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                            Control0..*
                                                            TypeExtension
                                                            Is Modifierfalse
                                                            Summaryfalse
                                                            Alternate Namesextensions, user content
                                                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                            SlicingThis element introduces a set of slices on Parameters.parameter.value[x].extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                                                            • value @ url
                                                            • 42. Parameters.parameter:patientReference.value[x].reference
                                                              Definition

                                                              A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.

                                                              ShortLiteral reference, Relative, internal or absolute URL
                                                              Comments

                                                              Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.

                                                              Control0..1
                                                              This element is affected by the following invariants: ref-1
                                                              Typestring
                                                              Is Modifierfalse
                                                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                              Summarytrue
                                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                              44. Parameters.parameter:patientReference.value[x].type
                                                              Definition

                                                              The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent.

                                                              The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources).

                                                              ShortType the reference refers to (e.g. "Patient")
                                                              Comments

                                                              This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified.

                                                              Control0..1
                                                              BindingUnless not suitable, these codes SHALL be taken from ResourceType
                                                              (extensible to http://hl7.org/fhir/ValueSet/resource-types)

                                                              Aa resource (or, for logical models, the URI of the logical model).

                                                              Typeuri
                                                              Is Modifierfalse
                                                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                              Summarytrue
                                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                              46. Parameters.parameter:patientReference.value[x].identifier
                                                              Definition

                                                              An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.

                                                              ShortLogical reference, when literal reference is not known
                                                              Comments

                                                              When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.

                                                              When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference

                                                              Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.

                                                              Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any).

                                                              NoteThis is a business identifier, not a resource identifier (see discussion)
                                                              Control0..1
                                                              TypeIdentifier
                                                              Is Modifierfalse
                                                              Summarytrue
                                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                              48. Parameters.parameter:patientReference.value[x].display
                                                              Definition

                                                              Plain text narrative that identifies the resource in addition to the resource reference.

                                                              ShortText alternative for the resource
                                                              Comments

                                                              This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.

                                                              Control0..0
                                                              Typestring
                                                              Is Modifierfalse
                                                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                              Must Supportfalse
                                                              Summarytrue
                                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                              50. Parameters.parameter:patientReference.resource
                                                              Definition

                                                              If the parameter is a whole resource.

                                                              ShortIf parameter is a whole resource
                                                              Comments

                                                              When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods.

                                                              Control0..1
                                                              This element is affected by the following invariants: inv-1
                                                              TypeResource
                                                              Is Modifierfalse
                                                              Summarytrue
                                                              52. Parameters.parameter:patientReference.part
                                                              Definition

                                                              A named part of a multi-part parameter.

                                                              ShortNamed part of a multi-part parameter
                                                              Comments

                                                              Only one level of nested parameters is allowed.

                                                              Control0..*
                                                              TypeSeettp://hl7.org/fhir/StructureDefinition/Parameters#Parameters.parameter
                                                              Is Modifierfalse
                                                              Summarytrue
                                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                              54. Parameters.parameter:combinedFundingStreams
                                                              Slice NamecombinedFundingStreams
                                                              Definition

                                                              A parameter passed to or received from the operation.

                                                              ShortOperation Parameter
                                                              Control1..1
                                                              TypeBackboneElement
                                                              Is Modifierfalse
                                                              Must Supporttrue
                                                              Summarytrue
                                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                              inv-1: A parameter must have one and only one of (value, resource, part) ((part.exists() and value.empty() and resource.empty()) or (part.empty() and (value.exists() xor resource.exists())))
                                                              56. Parameters.parameter:combinedFundingStreams.id
                                                              Definition

                                                              Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                                              ShortUnique id for inter-element referencing
                                                              Control0..1
                                                              Typestring
                                                              Is Modifierfalse
                                                              XML FormatIn the XML format, this property is represented as an attribute.
                                                              Summaryfalse
                                                              58. Parameters.parameter:combinedFundingStreams.extension
                                                              Definition

                                                              May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                                              ShortAdditional content defined by implementations
                                                              Comments

                                                              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                              Control0..*
                                                              TypeExtension
                                                              Is Modifierfalse
                                                              Summaryfalse
                                                              Alternate Namesextensions, user content
                                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                              60. Parameters.parameter:combinedFundingStreams.modifierExtension
                                                              Definition

                                                              May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                                              Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                                              ShortExtensions that cannot be ignored even if unrecognized
                                                              Comments

                                                              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                              Control0..*
                                                              TypeExtension
                                                              Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                                              Summarytrue
                                                              Requirements

                                                              Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                                              Alternate Namesextensions, user content, modifiers
                                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                              62. Parameters.parameter:combinedFundingStreams.name
                                                              Definition

                                                              The name of the parameter (reference to the operation definition).

                                                              ShortName from the definition
                                                              Control1..1
                                                              Typestring
                                                              Is Modifierfalse
                                                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                              Must Supporttrue
                                                              Summarytrue
                                                              Fixed ValuecombinedFundingStreams
                                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                              64. Parameters.parameter:combinedFundingStreams.value[x]
                                                              Definition

                                                              If the parameter is a data type.

                                                              ShortIf parameter is a data type
                                                              Control1..1
                                                              This element is affected by the following invariants: inv-1
                                                              Typestring
                                                              [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                                              Is Modifierfalse
                                                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                              Must Supporttrue
                                                              Summarytrue
                                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                              66. Parameters.parameter:combinedFundingStreams.resource
                                                              Definition

                                                              If the parameter is a whole resource.

                                                              ShortIf parameter is a whole resource
                                                              Comments

                                                              When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods.

                                                              Control0..1
                                                              This element is affected by the following invariants: inv-1
                                                              TypeResource
                                                              Is Modifierfalse
                                                              Summarytrue
                                                              68. Parameters.parameter:combinedFundingStreams.part
                                                              Definition

                                                              A named part of a multi-part parameter.

                                                              ShortNamed part of a multi-part parameter
                                                              Comments

                                                              Only one level of nested parameters is allowed.

                                                              Control0..*
                                                              TypeSeettp://hl7.org/fhir/StructureDefinition/Parameters#Parameters.parameter
                                                              Is Modifierfalse
                                                              Summarytrue
                                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                              70. Parameters.parameter:reportNames
                                                              Slice NamereportNames
                                                              Definition

                                                              A parameter passed to or received from the operation.

                                                              ShortOperation Parameter
                                                              Control1..1
                                                              TypeBackboneElement
                                                              Is Modifierfalse
                                                              Must Supporttrue
                                                              Summarytrue
                                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                              inv-1: A parameter must have one and only one of (value, resource, part) ((part.exists() and value.empty() and resource.empty()) or (part.empty() and (value.exists() xor resource.exists())))
                                                              72. Parameters.parameter:reportNames.id
                                                              Definition

                                                              Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                                              ShortUnique id for inter-element referencing
                                                              Control0..1
                                                              Typestring
                                                              Is Modifierfalse
                                                              XML FormatIn the XML format, this property is represented as an attribute.
                                                              Summaryfalse
                                                              74. Parameters.parameter:reportNames.extension
                                                              Definition

                                                              May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                                              ShortAdditional content defined by implementations
                                                              Comments

                                                              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                              Control0..*
                                                              TypeExtension
                                                              Is Modifierfalse
                                                              Summaryfalse
                                                              Alternate Namesextensions, user content
                                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                              76. Parameters.parameter:reportNames.modifierExtension
                                                              Definition

                                                              May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                                              Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                                              ShortExtensions that cannot be ignored even if unrecognized
                                                              Comments

                                                              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                              Control0..*
                                                              TypeExtension
                                                              Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                                              Summarytrue
                                                              Requirements

                                                              Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                                              Alternate Namesextensions, user content, modifiers
                                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                              78. Parameters.parameter:reportNames.name
                                                              Definition

                                                              The name of the parameter (reference to the operation definition).

                                                              ShortName from the definition
                                                              Control1..1
                                                              Typestring
                                                              Is Modifierfalse
                                                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                              Must Supporttrue
                                                              Summarytrue
                                                              Fixed ValuereportNames
                                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                              80. Parameters.parameter:reportNames.value[x]
                                                              Definition

                                                              If the parameter is a data type.

                                                              ShortIf parameter is a data type
                                                              Control0..1
                                                              This element is affected by the following invariants: inv-1
                                                              TypeChoice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta
                                                              [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                                              Is Modifierfalse
                                                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                              Summarytrue
                                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                              82. Parameters.parameter:reportNames.resource
                                                              Definition

                                                              If the parameter is a whole resource.

                                                              ShortIf parameter is a whole resource
                                                              Comments

                                                              When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods.

                                                              Control0..1
                                                              This element is affected by the following invariants: inv-1
                                                              TypeResource
                                                              Is Modifierfalse
                                                              Summarytrue
                                                              84. Parameters.parameter:reportNames.part
                                                              Definition

                                                              A named part of a multi-part parameter.

                                                              ShortNamed part of a multi-part parameter
                                                              Comments

                                                              Only one level of nested parameters is allowed.

                                                              Control0..*
                                                              TypeSeettp://hl7.org/fhir/StructureDefinition/Parameters#Parameters.parameter
                                                              Is Modifierfalse
                                                              Must Supporttrue
                                                              Summarytrue
                                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                              SlicingThis element introduces a set of slices on Parameters.parameter.part. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                                                              • value @ $this.name
                                                              • 86. Parameters.parameter:reportNames.part:patientsByZip
                                                                Slice NamepatientsByZip
                                                                Definition

                                                                A named part of a multi-part parameter.

                                                                ShortNamed part of a multi-part parameter
                                                                Comments

                                                                Only one level of nested parameters is allowed.

                                                                Control1..1
                                                                TypeBackboneElement
                                                                Is Modifierfalse
                                                                Must Supporttrue
                                                                Summarytrue
                                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                88. Parameters.parameter:reportNames.part:patientsByZip.id
                                                                Definition

                                                                Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                                                ShortUnique id for inter-element referencing
                                                                Control0..1
                                                                Typestring
                                                                Is Modifierfalse
                                                                XML FormatIn the XML format, this property is represented as an attribute.
                                                                Summaryfalse
                                                                90. Parameters.parameter:reportNames.part:patientsByZip.extension
                                                                Definition

                                                                May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                                                ShortAdditional content defined by implementations
                                                                Comments

                                                                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                Control0..*
                                                                TypeExtension
                                                                Is Modifierfalse
                                                                Summaryfalse
                                                                Alternate Namesextensions, user content
                                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                92. Parameters.parameter:reportNames.part:patientsByZip.modifierExtension
                                                                Definition

                                                                May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                                                Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                                                ShortExtensions that cannot be ignored even if unrecognized
                                                                Comments

                                                                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                Control0..*
                                                                TypeExtension
                                                                Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                                                Summarytrue
                                                                Requirements

                                                                Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                                                Alternate Namesextensions, user content, modifiers
                                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                94. Parameters.parameter:reportNames.part:patientsByZip.name
                                                                Definition

                                                                The name of the parameter (reference to the operation definition).

                                                                ShortName from the definition
                                                                Control1..1
                                                                Typestring
                                                                Is Modifierfalse
                                                                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                Must Supporttrue
                                                                Summarytrue
                                                                Fixed ValuepatientsByZip
                                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                96. Parameters.parameter:reportNames.part:patientsByZip.value[x]
                                                                Definition

                                                                If the parameter is a data type.

                                                                ShortIf parameter is a data type
                                                                Control1..1
                                                                This element is affected by the following invariants: inv-1
                                                                Typeboolean
                                                                [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                                                Is Modifierfalse
                                                                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                Must Supporttrue
                                                                Summarytrue
                                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                98. Parameters.parameter:reportNames.part:patientsByZip.resource
                                                                Definition

                                                                If the parameter is a whole resource.

                                                                ShortIf parameter is a whole resource
                                                                Comments

                                                                When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods.

                                                                Control0..1
                                                                This element is affected by the following invariants: inv-1
                                                                TypeResource
                                                                Is Modifierfalse
                                                                Summarytrue
                                                                100. Parameters.parameter:reportNames.part:patientsByZip.part
                                                                Definition

                                                                A named part of a multi-part parameter.

                                                                ShortNamed part of a multi-part parameter
                                                                Comments

                                                                Only one level of nested parameters is allowed.

                                                                Control0..*
                                                                TypeSeettp://hl7.org/fhir/StructureDefinition/Parameters#Parameters.parameter
                                                                Is Modifierfalse
                                                                Summarytrue
                                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                102. Parameters.parameter:reportNames.part:table3A
                                                                Slice Nametable3A
                                                                Definition

                                                                A named part of a multi-part parameter.

                                                                ShortNamed part of a multi-part parameter
                                                                Comments

                                                                Only one level of nested parameters is allowed.

                                                                Control1..1
                                                                TypeBackboneElement
                                                                Is Modifierfalse
                                                                Must Supporttrue
                                                                Summarytrue
                                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                104. Parameters.parameter:reportNames.part:table3A.id
                                                                Definition

                                                                Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                                                ShortUnique id for inter-element referencing
                                                                Control0..1
                                                                Typestring
                                                                Is Modifierfalse
                                                                XML FormatIn the XML format, this property is represented as an attribute.
                                                                Summaryfalse
                                                                106. Parameters.parameter:reportNames.part:table3A.extension
                                                                Definition

                                                                May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                                                ShortAdditional content defined by implementations
                                                                Comments

                                                                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                Control0..*
                                                                TypeExtension
                                                                Is Modifierfalse
                                                                Summaryfalse
                                                                Alternate Namesextensions, user content
                                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                108. Parameters.parameter:reportNames.part:table3A.modifierExtension
                                                                Definition

                                                                May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                                                Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                                                ShortExtensions that cannot be ignored even if unrecognized
                                                                Comments

                                                                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                Control0..*
                                                                TypeExtension
                                                                Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                                                Summarytrue
                                                                Requirements

                                                                Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                                                Alternate Namesextensions, user content, modifiers
                                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                110. Parameters.parameter:reportNames.part:table3A.name
                                                                Definition

                                                                The name of the parameter (reference to the operation definition).

                                                                ShortName from the definition
                                                                Control1..1
                                                                Typestring
                                                                Is Modifierfalse
                                                                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                Must Supporttrue
                                                                Summarytrue
                                                                Fixed Valuetable3A
                                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                112. Parameters.parameter:reportNames.part:table3A.value[x]
                                                                Definition

                                                                If the parameter is a data type.

                                                                ShortIf parameter is a data type
                                                                Control1..1
                                                                This element is affected by the following invariants: inv-1
                                                                Typeboolean
                                                                [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                                                Is Modifierfalse
                                                                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                Must Supporttrue
                                                                Summarytrue
                                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                114. Parameters.parameter:reportNames.part:table3A.resource
                                                                Definition

                                                                If the parameter is a whole resource.

                                                                ShortIf parameter is a whole resource
                                                                Comments

                                                                When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods.

                                                                Control0..1
                                                                This element is affected by the following invariants: inv-1
                                                                TypeResource
                                                                Is Modifierfalse
                                                                Summarytrue
                                                                116. Parameters.parameter:reportNames.part:table3A.part
                                                                Definition

                                                                A named part of a multi-part parameter.

                                                                ShortNamed part of a multi-part parameter
                                                                Comments

                                                                Only one level of nested parameters is allowed.

                                                                Control0..*
                                                                TypeSeettp://hl7.org/fhir/StructureDefinition/Parameters#Parameters.parameter
                                                                Is Modifierfalse
                                                                Summarytrue
                                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                118. Parameters.parameter:reportNames.part:table3B
                                                                Slice Nametable3B
                                                                Definition

                                                                A named part of a multi-part parameter.

                                                                ShortNamed part of a multi-part parameter
                                                                Comments

                                                                Only one level of nested parameters is allowed.

                                                                Control1..1
                                                                TypeBackboneElement
                                                                Is Modifierfalse
                                                                Must Supporttrue
                                                                Summarytrue
                                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                120. Parameters.parameter:reportNames.part:table3B.id
                                                                Definition

                                                                Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                                                ShortUnique id for inter-element referencing
                                                                Control0..1
                                                                Typestring
                                                                Is Modifierfalse
                                                                XML FormatIn the XML format, this property is represented as an attribute.
                                                                Summaryfalse
                                                                122. Parameters.parameter:reportNames.part:table3B.extension
                                                                Definition

                                                                May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                                                ShortAdditional content defined by implementations
                                                                Comments

                                                                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                Control0..*
                                                                TypeExtension
                                                                Is Modifierfalse
                                                                Summaryfalse
                                                                Alternate Namesextensions, user content
                                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                124. Parameters.parameter:reportNames.part:table3B.modifierExtension
                                                                Definition

                                                                May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                                                Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                                                ShortExtensions that cannot be ignored even if unrecognized
                                                                Comments

                                                                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                Control0..*
                                                                TypeExtension
                                                                Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                                                Summarytrue
                                                                Requirements

                                                                Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                                                Alternate Namesextensions, user content, modifiers
                                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                126. Parameters.parameter:reportNames.part:table3B.name
                                                                Definition

                                                                The name of the parameter (reference to the operation definition).

                                                                ShortName from the definition
                                                                Control1..1
                                                                Typestring
                                                                Is Modifierfalse
                                                                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                Must Supporttrue
                                                                Summarytrue
                                                                Fixed Valuetable3B
                                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                128. Parameters.parameter:reportNames.part:table3B.value[x]
                                                                Definition

                                                                If the parameter is a data type.

                                                                ShortIf parameter is a data type
                                                                Control1..1
                                                                This element is affected by the following invariants: inv-1
                                                                Typeboolean
                                                                [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                                                Is Modifierfalse
                                                                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                Must Supporttrue
                                                                Summarytrue
                                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                130. Parameters.parameter:reportNames.part:table3B.resource
                                                                Definition

                                                                If the parameter is a whole resource.

                                                                ShortIf parameter is a whole resource
                                                                Comments

                                                                When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods.

                                                                Control0..1
                                                                This element is affected by the following invariants: inv-1
                                                                TypeResource
                                                                Is Modifierfalse
                                                                Summarytrue
                                                                132. Parameters.parameter:reportNames.part:table3B.part
                                                                Definition

                                                                A named part of a multi-part parameter.

                                                                ShortNamed part of a multi-part parameter
                                                                Comments

                                                                Only one level of nested parameters is allowed.

                                                                Control0..*
                                                                TypeSeettp://hl7.org/fhir/StructureDefinition/Parameters#Parameters.parameter
                                                                Is Modifierfalse
                                                                Summarytrue
                                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                134. Parameters.parameter:reportNames.part:table4
                                                                Slice Nametable4
                                                                Definition

                                                                A named part of a multi-part parameter.

                                                                ShortNamed part of a multi-part parameter
                                                                Comments

                                                                Only one level of nested parameters is allowed.

                                                                Control1..1
                                                                TypeBackboneElement
                                                                Is Modifierfalse
                                                                Must Supporttrue
                                                                Summarytrue
                                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                136. Parameters.parameter:reportNames.part:table4.id
                                                                Definition

                                                                Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                                                ShortUnique id for inter-element referencing
                                                                Control0..1
                                                                Typestring
                                                                Is Modifierfalse
                                                                XML FormatIn the XML format, this property is represented as an attribute.
                                                                Summaryfalse
                                                                138. Parameters.parameter:reportNames.part:table4.extension
                                                                Definition

                                                                May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                                                ShortAdditional content defined by implementations
                                                                Comments

                                                                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                Control0..*
                                                                TypeExtension
                                                                Is Modifierfalse
                                                                Summaryfalse
                                                                Alternate Namesextensions, user content
                                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                140. Parameters.parameter:reportNames.part:table4.modifierExtension
                                                                Definition

                                                                May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                                                Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                                                ShortExtensions that cannot be ignored even if unrecognized
                                                                Comments

                                                                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                Control0..*
                                                                TypeExtension
                                                                Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                                                Summarytrue
                                                                Requirements

                                                                Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                                                Alternate Namesextensions, user content, modifiers
                                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                142. Parameters.parameter:reportNames.part:table4.name
                                                                Definition

                                                                The name of the parameter (reference to the operation definition).

                                                                ShortName from the definition
                                                                Control1..1
                                                                Typestring
                                                                Is Modifierfalse
                                                                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                Must Supporttrue
                                                                Summarytrue
                                                                Fixed Valuetable4
                                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                144. Parameters.parameter:reportNames.part:table4.value[x]
                                                                Definition

                                                                If the parameter is a data type.

                                                                ShortIf parameter is a data type
                                                                Control1..1
                                                                This element is affected by the following invariants: inv-1
                                                                Typeboolean
                                                                [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                                                Is Modifierfalse
                                                                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                Must Supporttrue
                                                                Summarytrue
                                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                146. Parameters.parameter:reportNames.part:table4.resource
                                                                Definition

                                                                If the parameter is a whole resource.

                                                                ShortIf parameter is a whole resource
                                                                Comments

                                                                When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods.

                                                                Control0..1
                                                                This element is affected by the following invariants: inv-1
                                                                TypeResource
                                                                Is Modifierfalse
                                                                Summarytrue
                                                                148. Parameters.parameter:reportNames.part:table4.part
                                                                Definition

                                                                A named part of a multi-part parameter.

                                                                ShortNamed part of a multi-part parameter
                                                                Comments

                                                                Only one level of nested parameters is allowed.

                                                                Control0..*
                                                                TypeSeettp://hl7.org/fhir/StructureDefinition/Parameters#Parameters.parameter
                                                                Is Modifierfalse
                                                                Summarytrue
                                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                150. Parameters.parameter:reportNames.part:table6A
                                                                Slice Nametable6A
                                                                Definition

                                                                A named part of a multi-part parameter.

                                                                ShortNamed part of a multi-part parameter
                                                                Comments

                                                                Only one level of nested parameters is allowed.

                                                                Control1..1
                                                                TypeBackboneElement
                                                                Is Modifierfalse
                                                                Must Supporttrue
                                                                Summarytrue
                                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                152. Parameters.parameter:reportNames.part:table6A.id
                                                                Definition

                                                                Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                                                ShortUnique id for inter-element referencing
                                                                Control0..1
                                                                Typestring
                                                                Is Modifierfalse
                                                                XML FormatIn the XML format, this property is represented as an attribute.
                                                                Summaryfalse
                                                                154. Parameters.parameter:reportNames.part:table6A.extension
                                                                Definition

                                                                May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                                                ShortAdditional content defined by implementations
                                                                Comments

                                                                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                Control0..*
                                                                TypeExtension
                                                                Is Modifierfalse
                                                                Summaryfalse
                                                                Alternate Namesextensions, user content
                                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                156. Parameters.parameter:reportNames.part:table6A.modifierExtension
                                                                Definition

                                                                May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                                                Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                                                ShortExtensions that cannot be ignored even if unrecognized
                                                                Comments

                                                                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                Control0..*
                                                                TypeExtension
                                                                Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                                                Summarytrue
                                                                Requirements

                                                                Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                                                Alternate Namesextensions, user content, modifiers
                                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                158. Parameters.parameter:reportNames.part:table6A.name
                                                                Definition

                                                                The name of the parameter (reference to the operation definition).

                                                                ShortName from the definition
                                                                Control1..1
                                                                Typestring
                                                                Is Modifierfalse
                                                                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                Must Supporttrue
                                                                Summarytrue
                                                                Fixed Valuetable6A
                                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                160. Parameters.parameter:reportNames.part:table6A.value[x]
                                                                Definition

                                                                If the parameter is a data type.

                                                                ShortIf parameter is a data type
                                                                Control1..1
                                                                This element is affected by the following invariants: inv-1
                                                                Typeboolean
                                                                [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                                                Is Modifierfalse
                                                                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                Must Supporttrue
                                                                Summarytrue
                                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                162. Parameters.parameter:reportNames.part:table6A.resource
                                                                Definition

                                                                If the parameter is a whole resource.

                                                                ShortIf parameter is a whole resource
                                                                Comments

                                                                When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods.

                                                                Control0..1
                                                                This element is affected by the following invariants: inv-1
                                                                TypeResource
                                                                Is Modifierfalse
                                                                Summarytrue
                                                                164. Parameters.parameter:reportNames.part:table6A.part
                                                                Definition

                                                                A named part of a multi-part parameter.

                                                                ShortNamed part of a multi-part parameter
                                                                Comments

                                                                Only one level of nested parameters is allowed.

                                                                Control0..*
                                                                TypeSeettp://hl7.org/fhir/StructureDefinition/Parameters#Parameters.parameter
                                                                Is Modifierfalse
                                                                Summarytrue
                                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                166. Parameters.parameter:reportNames.part:table6B-Line1-6
                                                                Slice Nametable6B-Line1-6
                                                                Definition

                                                                A named part of a multi-part parameter.

                                                                ShortNamed part of a multi-part parameter
                                                                Comments

                                                                Only one level of nested parameters is allowed.

                                                                Control1..1
                                                                TypeBackboneElement
                                                                Is Modifierfalse
                                                                Must Supporttrue
                                                                Summarytrue
                                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                168. Parameters.parameter:reportNames.part:table6B-Line1-6.id
                                                                Definition

                                                                Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                                                ShortUnique id for inter-element referencing
                                                                Control0..1
                                                                Typestring
                                                                Is Modifierfalse
                                                                XML FormatIn the XML format, this property is represented as an attribute.
                                                                Summaryfalse
                                                                170. Parameters.parameter:reportNames.part:table6B-Line1-6.extension
                                                                Definition

                                                                May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                                                ShortAdditional content defined by implementations
                                                                Comments

                                                                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                Control0..*
                                                                TypeExtension
                                                                Is Modifierfalse
                                                                Summaryfalse
                                                                Alternate Namesextensions, user content
                                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                172. Parameters.parameter:reportNames.part:table6B-Line1-6.modifierExtension
                                                                Definition

                                                                May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                                                Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                                                ShortExtensions that cannot be ignored even if unrecognized
                                                                Comments

                                                                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                Control0..*
                                                                TypeExtension
                                                                Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                                                Summarytrue
                                                                Requirements

                                                                Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                                                Alternate Namesextensions, user content, modifiers
                                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                174. Parameters.parameter:reportNames.part:table6B-Line1-6.name
                                                                Definition

                                                                The name of the parameter (reference to the operation definition).

                                                                ShortName from the definition
                                                                Control1..1
                                                                Typestring
                                                                Is Modifierfalse
                                                                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                Must Supporttrue
                                                                Summarytrue
                                                                Fixed Valuetable6B-Line1-6-Age-Of-Prenatal-Care-Patients
                                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                176. Parameters.parameter:reportNames.part:table6B-Line1-6.value[x]
                                                                Definition

                                                                If the parameter is a data type.

                                                                ShortIf parameter is a data type
                                                                Control1..1
                                                                This element is affected by the following invariants: inv-1
                                                                Typeboolean
                                                                [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                                                Is Modifierfalse
                                                                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                Must Supporttrue
                                                                Summarytrue
                                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                178. Parameters.parameter:reportNames.part:table6B-Line1-6.resource
                                                                Definition

                                                                If the parameter is a whole resource.

                                                                ShortIf parameter is a whole resource
                                                                Comments

                                                                When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods.

                                                                Control0..1
                                                                This element is affected by the following invariants: inv-1
                                                                TypeResource
                                                                Is Modifierfalse
                                                                Summarytrue
                                                                180. Parameters.parameter:reportNames.part:table6B-Line1-6.part
                                                                Definition

                                                                A named part of a multi-part parameter.

                                                                ShortNamed part of a multi-part parameter
                                                                Comments

                                                                Only one level of nested parameters is allowed.

                                                                Control0..*
                                                                TypeSeettp://hl7.org/fhir/StructureDefinition/Parameters#Parameters.parameter
                                                                Is Modifierfalse
                                                                Summarytrue
                                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                182. Parameters.parameter:reportNames.part:table6B-Line7-9
                                                                Slice Nametable6B-Line7-9
                                                                Definition

                                                                A named part of a multi-part parameter.

                                                                ShortNamed part of a multi-part parameter
                                                                Comments

                                                                Only one level of nested parameters is allowed.

                                                                Control1..1
                                                                TypeBackboneElement
                                                                Is Modifierfalse
                                                                Must Supporttrue
                                                                Summarytrue
                                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                184. Parameters.parameter:reportNames.part:table6B-Line7-9.id
                                                                Definition

                                                                Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                                                ShortUnique id for inter-element referencing
                                                                Control0..1
                                                                Typestring
                                                                Is Modifierfalse
                                                                XML FormatIn the XML format, this property is represented as an attribute.
                                                                Summaryfalse
                                                                186. Parameters.parameter:reportNames.part:table6B-Line7-9.extension
                                                                Definition

                                                                May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                                                ShortAdditional content defined by implementations
                                                                Comments

                                                                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                Control0..*
                                                                TypeExtension
                                                                Is Modifierfalse
                                                                Summaryfalse
                                                                Alternate Namesextensions, user content
                                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                188. Parameters.parameter:reportNames.part:table6B-Line7-9.modifierExtension
                                                                Definition

                                                                May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                                                Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                                                ShortExtensions that cannot be ignored even if unrecognized
                                                                Comments

                                                                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                Control0..*
                                                                TypeExtension
                                                                Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                                                Summarytrue
                                                                Requirements

                                                                Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                                                Alternate Namesextensions, user content, modifiers
                                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                190. Parameters.parameter:reportNames.part:table6B-Line7-9.name
                                                                Definition

                                                                The name of the parameter (reference to the operation definition).

                                                                ShortName from the definition
                                                                Control1..1
                                                                Typestring
                                                                Is Modifierfalse
                                                                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                Must Supporttrue
                                                                Summarytrue
                                                                Fixed Valuetable6B-Line7-9-Early-Entry-Into-Prenatal-Care
                                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                192. Parameters.parameter:reportNames.part:table6B-Line7-9.value[x]
                                                                Definition

                                                                If the parameter is a data type.

                                                                ShortIf parameter is a data type
                                                                Control1..1
                                                                This element is affected by the following invariants: inv-1
                                                                Typeboolean
                                                                [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                                                Is Modifierfalse
                                                                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                Must Supporttrue
                                                                Summarytrue
                                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                194. Parameters.parameter:reportNames.part:table6B-Line7-9.resource
                                                                Definition

                                                                If the parameter is a whole resource.

                                                                ShortIf parameter is a whole resource
                                                                Comments

                                                                When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods.

                                                                Control0..1
                                                                This element is affected by the following invariants: inv-1
                                                                TypeResource
                                                                Is Modifierfalse
                                                                Summarytrue
                                                                196. Parameters.parameter:reportNames.part:table6B-Line7-9.part
                                                                Definition

                                                                A named part of a multi-part parameter.

                                                                ShortNamed part of a multi-part parameter
                                                                Comments

                                                                Only one level of nested parameters is allowed.

                                                                Control0..*
                                                                TypeSeettp://hl7.org/fhir/StructureDefinition/Parameters#Parameters.parameter
                                                                Is Modifierfalse
                                                                Summarytrue
                                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                198. Parameters.parameter:reportNames.part:table6B-Line10
                                                                Slice Nametable6B-Line10
                                                                Definition

                                                                A named part of a multi-part parameter.

                                                                ShortNamed part of a multi-part parameter
                                                                Comments

                                                                Only one level of nested parameters is allowed.

                                                                Control1..1
                                                                TypeBackboneElement
                                                                Is Modifierfalse
                                                                Must Supporttrue
                                                                Summarytrue
                                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                200. Parameters.parameter:reportNames.part:table6B-Line10.id
                                                                Definition

                                                                Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                                                ShortUnique id for inter-element referencing
                                                                Control0..1
                                                                Typestring
                                                                Is Modifierfalse
                                                                XML FormatIn the XML format, this property is represented as an attribute.
                                                                Summaryfalse
                                                                202. Parameters.parameter:reportNames.part:table6B-Line10.extension
                                                                Definition

                                                                May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                                                ShortAdditional content defined by implementations
                                                                Comments

                                                                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                Control0..*
                                                                TypeExtension
                                                                Is Modifierfalse
                                                                Summaryfalse
                                                                Alternate Namesextensions, user content
                                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                204. Parameters.parameter:reportNames.part:table6B-Line10.modifierExtension
                                                                Definition

                                                                May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                                                Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                                                ShortExtensions that cannot be ignored even if unrecognized
                                                                Comments

                                                                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                Control0..*
                                                                TypeExtension
                                                                Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                                                Summarytrue
                                                                Requirements

                                                                Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                                                Alternate Namesextensions, user content, modifiers
                                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                206. Parameters.parameter:reportNames.part:table6B-Line10.name
                                                                Definition

                                                                The name of the parameter (reference to the operation definition).

                                                                ShortName from the definition
                                                                Control1..1
                                                                Typestring
                                                                Is Modifierfalse
                                                                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                Must Supporttrue
                                                                Summarytrue
                                                                Fixed Valuetable6B-Line10-Childhood-Immunization-Status-CMS117
                                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                208. Parameters.parameter:reportNames.part:table6B-Line10.value[x]
                                                                Definition

                                                                If the parameter is a data type.

                                                                ShortIf parameter is a data type
                                                                Control1..1
                                                                This element is affected by the following invariants: inv-1
                                                                Typeboolean
                                                                [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                                                Is Modifierfalse
                                                                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                Must Supporttrue
                                                                Summarytrue
                                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                210. Parameters.parameter:reportNames.part:table6B-Line10.resource
                                                                Definition

                                                                If the parameter is a whole resource.

                                                                ShortIf parameter is a whole resource
                                                                Comments

                                                                When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods.

                                                                Control0..1
                                                                This element is affected by the following invariants: inv-1
                                                                TypeResource
                                                                Is Modifierfalse
                                                                Summarytrue
                                                                212. Parameters.parameter:reportNames.part:table6B-Line10.part
                                                                Definition

                                                                A named part of a multi-part parameter.

                                                                ShortNamed part of a multi-part parameter
                                                                Comments

                                                                Only one level of nested parameters is allowed.

                                                                Control0..*
                                                                TypeSeettp://hl7.org/fhir/StructureDefinition/Parameters#Parameters.parameter
                                                                Is Modifierfalse
                                                                Must Supporttrue
                                                                Summarytrue
                                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                SlicingThis element introduces a set of slices on Parameters.parameter.part.part. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                                                                • value @ $this.name
                                                                • 214. Parameters.parameter:reportNames.part:table6B-Line10.part:table6B-Line10-den
                                                                  Slice Nametable6B-Line10-den
                                                                  Definition

                                                                  A named part of a multi-part parameter.

                                                                  ShortNamed part of a multi-part parameter
                                                                  Comments

                                                                  Only one level of nested parameters is allowed.

                                                                  Control0..1
                                                                  TypeBackboneElement
                                                                  Is Modifierfalse
                                                                  Must Supporttrue
                                                                  Summarytrue
                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                  216. Parameters.parameter:reportNames.part:table6B-Line10.part:table6B-Line10-den.id
                                                                  Definition

                                                                  Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                                                  ShortUnique id for inter-element referencing
                                                                  Control0..1
                                                                  Typestring
                                                                  Is Modifierfalse
                                                                  XML FormatIn the XML format, this property is represented as an attribute.
                                                                  Summaryfalse
                                                                  218. Parameters.parameter:reportNames.part:table6B-Line10.part:table6B-Line10-den.extension
                                                                  Definition

                                                                  May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                                                  ShortAdditional content defined by implementations
                                                                  Comments

                                                                  There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                  Control0..*
                                                                  TypeExtension
                                                                  Is Modifierfalse
                                                                  Summaryfalse
                                                                  Alternate Namesextensions, user content
                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                  220. Parameters.parameter:reportNames.part:table6B-Line10.part:table6B-Line10-den.modifierExtension
                                                                  Definition

                                                                  May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                                                  Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                                                  ShortExtensions that cannot be ignored even if unrecognized
                                                                  Comments

                                                                  There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                  Control0..*
                                                                  TypeExtension
                                                                  Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                                                  Summarytrue
                                                                  Requirements

                                                                  Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                                                  Alternate Namesextensions, user content, modifiers
                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                  222. Parameters.parameter:reportNames.part:table6B-Line10.part:table6B-Line10-den.name
                                                                  Definition

                                                                  The name of the parameter (reference to the operation definition).

                                                                  ShortName from the definition
                                                                  Control1..1
                                                                  Typestring
                                                                  Is Modifierfalse
                                                                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                  Must Supporttrue
                                                                  Summarytrue
                                                                  Fixed Valuetable6B-Line10-Childhood-Immunization-Status-CMS117-den
                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                  224. Parameters.parameter:reportNames.part:table6B-Line10.part:table6B-Line10-den.value[x]
                                                                  Definition

                                                                  If the parameter is a data type.

                                                                  ShortIf parameter is a data type
                                                                  Control1..1
                                                                  This element is affected by the following invariants: inv-1
                                                                  Typeboolean
                                                                  [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                                                  Is Modifierfalse
                                                                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                  Must Supporttrue
                                                                  Summarytrue
                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                  226. Parameters.parameter:reportNames.part:table6B-Line10.part:table6B-Line10-den.resource
                                                                  Definition

                                                                  If the parameter is a whole resource.

                                                                  ShortIf parameter is a whole resource
                                                                  Comments

                                                                  When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods.

                                                                  Control0..1
                                                                  This element is affected by the following invariants: inv-1
                                                                  TypeResource
                                                                  Is Modifierfalse
                                                                  Summarytrue
                                                                  228. Parameters.parameter:reportNames.part:table6B-Line10.part:table6B-Line10-den.part
                                                                  Definition

                                                                  A named part of a multi-part parameter.

                                                                  ShortNamed part of a multi-part parameter
                                                                  Comments

                                                                  Only one level of nested parameters is allowed.

                                                                  Control0..*
                                                                  TypeSeettp://hl7.org/fhir/StructureDefinition/Parameters#Parameters.parameter
                                                                  Is Modifierfalse
                                                                  Summarytrue
                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                  230. Parameters.parameter:reportNames.part:table6B-Line10.part:table6B-Line10-denexcl
                                                                  Slice Nametable6B-Line10-denexcl
                                                                  Definition

                                                                  A named part of a multi-part parameter.

                                                                  ShortNamed part of a multi-part parameter
                                                                  Comments

                                                                  Only one level of nested parameters is allowed.

                                                                  Control0..1
                                                                  TypeBackboneElement
                                                                  Is Modifierfalse
                                                                  Must Supporttrue
                                                                  Summarytrue
                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                  232. Parameters.parameter:reportNames.part:table6B-Line10.part:table6B-Line10-denexcl.id
                                                                  Definition

                                                                  Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                                                  ShortUnique id for inter-element referencing
                                                                  Control0..1
                                                                  Typestring
                                                                  Is Modifierfalse
                                                                  XML FormatIn the XML format, this property is represented as an attribute.
                                                                  Summaryfalse
                                                                  234. Parameters.parameter:reportNames.part:table6B-Line10.part:table6B-Line10-denexcl.extension
                                                                  Definition

                                                                  May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                                                  ShortAdditional content defined by implementations
                                                                  Comments

                                                                  There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                  Control0..*
                                                                  TypeExtension
                                                                  Is Modifierfalse
                                                                  Summaryfalse
                                                                  Alternate Namesextensions, user content
                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                  236. Parameters.parameter:reportNames.part:table6B-Line10.part:table6B-Line10-denexcl.modifierExtension
                                                                  Definition

                                                                  May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                                                  Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                                                  ShortExtensions that cannot be ignored even if unrecognized
                                                                  Comments

                                                                  There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                  Control0..*
                                                                  TypeExtension
                                                                  Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                                                  Summarytrue
                                                                  Requirements

                                                                  Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                                                  Alternate Namesextensions, user content, modifiers
                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                  238. Parameters.parameter:reportNames.part:table6B-Line10.part:table6B-Line10-denexcl.name
                                                                  Definition

                                                                  The name of the parameter (reference to the operation definition).

                                                                  ShortName from the definition
                                                                  Control1..1
                                                                  Typestring
                                                                  Is Modifierfalse
                                                                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                  Must Supporttrue
                                                                  Summarytrue
                                                                  Fixed Valuetable6B-Line10-Childhood-Immunization-Status-CMS117-denexcl
                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                  240. Parameters.parameter:reportNames.part:table6B-Line10.part:table6B-Line10-denexcl.value[x]
                                                                  Definition

                                                                  If the parameter is a data type.

                                                                  ShortIf parameter is a data type
                                                                  Control1..1
                                                                  This element is affected by the following invariants: inv-1
                                                                  Typeboolean
                                                                  [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                                                  Is Modifierfalse
                                                                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                  Must Supporttrue
                                                                  Summarytrue
                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                  242. Parameters.parameter:reportNames.part:table6B-Line10.part:table6B-Line10-denexcl.resource
                                                                  Definition

                                                                  If the parameter is a whole resource.

                                                                  ShortIf parameter is a whole resource
                                                                  Comments

                                                                  When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods.

                                                                  Control0..1
                                                                  This element is affected by the following invariants: inv-1
                                                                  TypeResource
                                                                  Is Modifierfalse
                                                                  Summarytrue
                                                                  244. Parameters.parameter:reportNames.part:table6B-Line10.part:table6B-Line10-denexcl.part
                                                                  Definition

                                                                  A named part of a multi-part parameter.

                                                                  ShortNamed part of a multi-part parameter
                                                                  Comments

                                                                  Only one level of nested parameters is allowed.

                                                                  Control0..*
                                                                  TypeSeettp://hl7.org/fhir/StructureDefinition/Parameters#Parameters.parameter
                                                                  Is Modifierfalse
                                                                  Summarytrue
                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                  246. Parameters.parameter:reportNames.part:table6B-Line10.part:table6B-Line10-num
                                                                  Slice Nametable6B-Line10-num
                                                                  Definition

                                                                  A named part of a multi-part parameter.

                                                                  ShortNamed part of a multi-part parameter
                                                                  Comments

                                                                  Only one level of nested parameters is allowed.

                                                                  Control0..1
                                                                  TypeBackboneElement
                                                                  Is Modifierfalse
                                                                  Must Supporttrue
                                                                  Summarytrue
                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                  248. Parameters.parameter:reportNames.part:table6B-Line10.part:table6B-Line10-num.id
                                                                  Definition

                                                                  Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                                                  ShortUnique id for inter-element referencing
                                                                  Control0..1
                                                                  Typestring
                                                                  Is Modifierfalse
                                                                  XML FormatIn the XML format, this property is represented as an attribute.
                                                                  Summaryfalse
                                                                  250. Parameters.parameter:reportNames.part:table6B-Line10.part:table6B-Line10-num.extension
                                                                  Definition

                                                                  May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                                                  ShortAdditional content defined by implementations
                                                                  Comments

                                                                  There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                  Control0..*
                                                                  TypeExtension
                                                                  Is Modifierfalse
                                                                  Summaryfalse
                                                                  Alternate Namesextensions, user content
                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                  252. Parameters.parameter:reportNames.part:table6B-Line10.part:table6B-Line10-num.modifierExtension
                                                                  Definition

                                                                  May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                                                  Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                                                  ShortExtensions that cannot be ignored even if unrecognized
                                                                  Comments

                                                                  There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                  Control0..*
                                                                  TypeExtension
                                                                  Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                                                  Summarytrue
                                                                  Requirements

                                                                  Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                                                  Alternate Namesextensions, user content, modifiers
                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                  254. Parameters.parameter:reportNames.part:table6B-Line10.part:table6B-Line10-num.name
                                                                  Definition

                                                                  The name of the parameter (reference to the operation definition).

                                                                  ShortName from the definition
                                                                  Control1..1
                                                                  Typestring
                                                                  Is Modifierfalse
                                                                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                  Must Supporttrue
                                                                  Summarytrue
                                                                  Fixed Valuetable6B-Line10-Childhood-Immunization-Status-CMS117-num
                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                  256. Parameters.parameter:reportNames.part:table6B-Line10.part:table6B-Line10-num.value[x]
                                                                  Definition

                                                                  If the parameter is a data type.

                                                                  ShortIf parameter is a data type
                                                                  Control1..1
                                                                  This element is affected by the following invariants: inv-1
                                                                  Typeboolean
                                                                  [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                                                  Is Modifierfalse
                                                                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                  Must Supporttrue
                                                                  Summarytrue
                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                  258. Parameters.parameter:reportNames.part:table6B-Line10.part:table6B-Line10-num.resource
                                                                  Definition

                                                                  If the parameter is a whole resource.

                                                                  ShortIf parameter is a whole resource
                                                                  Comments

                                                                  When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods.

                                                                  Control0..1
                                                                  This element is affected by the following invariants: inv-1
                                                                  TypeResource
                                                                  Is Modifierfalse
                                                                  Summarytrue
                                                                  260. Parameters.parameter:reportNames.part:table6B-Line10.part:table6B-Line10-num.part
                                                                  Definition

                                                                  A named part of a multi-part parameter.

                                                                  ShortNamed part of a multi-part parameter
                                                                  Comments

                                                                  Only one level of nested parameters is allowed.

                                                                  Control0..*
                                                                  TypeSeettp://hl7.org/fhir/StructureDefinition/Parameters#Parameters.parameter
                                                                  Is Modifierfalse
                                                                  Summarytrue
                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                  262. Parameters.parameter:reportNames.part:table6B-Line11
                                                                  Slice Nametable6B-Line11
                                                                  Definition

                                                                  A named part of a multi-part parameter.

                                                                  ShortNamed part of a multi-part parameter
                                                                  Comments

                                                                  Only one level of nested parameters is allowed.

                                                                  Control1..1
                                                                  TypeBackboneElement
                                                                  Is Modifierfalse
                                                                  Must Supporttrue
                                                                  Summarytrue
                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                  264. Parameters.parameter:reportNames.part:table6B-Line11.id
                                                                  Definition

                                                                  Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                                                  ShortUnique id for inter-element referencing
                                                                  Control0..1
                                                                  Typestring
                                                                  Is Modifierfalse
                                                                  XML FormatIn the XML format, this property is represented as an attribute.
                                                                  Summaryfalse
                                                                  266. Parameters.parameter:reportNames.part:table6B-Line11.extension
                                                                  Definition

                                                                  May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                                                  ShortAdditional content defined by implementations
                                                                  Comments

                                                                  There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                  Control0..*
                                                                  TypeExtension
                                                                  Is Modifierfalse
                                                                  Summaryfalse
                                                                  Alternate Namesextensions, user content
                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                  268. Parameters.parameter:reportNames.part:table6B-Line11.modifierExtension
                                                                  Definition

                                                                  May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                                                  Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                                                  ShortExtensions that cannot be ignored even if unrecognized
                                                                  Comments

                                                                  There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                  Control0..*
                                                                  TypeExtension
                                                                  Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                                                  Summarytrue
                                                                  Requirements

                                                                  Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                                                  Alternate Namesextensions, user content, modifiers
                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                  270. Parameters.parameter:reportNames.part:table6B-Line11.name
                                                                  Definition

                                                                  The name of the parameter (reference to the operation definition).

                                                                  ShortName from the definition
                                                                  Control1..1
                                                                  Typestring
                                                                  Is Modifierfalse
                                                                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                  Must Supporttrue
                                                                  Summarytrue
                                                                  Fixed Valuetable6B-Line11-Cervical-Cancer-Screening-CMS124
                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                  272. Parameters.parameter:reportNames.part:table6B-Line11.value[x]
                                                                  Definition

                                                                  If the parameter is a data type.

                                                                  ShortIf parameter is a data type
                                                                  Control1..1
                                                                  This element is affected by the following invariants: inv-1
                                                                  Typeboolean
                                                                  [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                                                  Is Modifierfalse
                                                                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                  Must Supporttrue
                                                                  Summarytrue
                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                  274. Parameters.parameter:reportNames.part:table6B-Line11.resource
                                                                  Definition

                                                                  If the parameter is a whole resource.

                                                                  ShortIf parameter is a whole resource
                                                                  Comments

                                                                  When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods.

                                                                  Control0..1
                                                                  This element is affected by the following invariants: inv-1
                                                                  TypeResource
                                                                  Is Modifierfalse
                                                                  Summarytrue
                                                                  276. Parameters.parameter:reportNames.part:table6B-Line11.part
                                                                  Definition

                                                                  A named part of a multi-part parameter.

                                                                  ShortNamed part of a multi-part parameter
                                                                  Comments

                                                                  Only one level of nested parameters is allowed.

                                                                  Control0..*
                                                                  TypeSeettp://hl7.org/fhir/StructureDefinition/Parameters#Parameters.parameter
                                                                  Is Modifierfalse
                                                                  Must Supporttrue
                                                                  Summarytrue
                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                  SlicingThis element introduces a set of slices on Parameters.parameter.part.part. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                                                                  • value @ $this.name
                                                                  • 278. Parameters.parameter:reportNames.part:table6B-Line11.part:table6B-Line11-den
                                                                    Slice Nametable6B-Line11-den
                                                                    Definition

                                                                    A named part of a multi-part parameter.

                                                                    ShortNamed part of a multi-part parameter
                                                                    Comments

                                                                    Only one level of nested parameters is allowed.

                                                                    Control0..1
                                                                    TypeBackboneElement
                                                                    Is Modifierfalse
                                                                    Must Supporttrue
                                                                    Summarytrue
                                                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                    280. Parameters.parameter:reportNames.part:table6B-Line11.part:table6B-Line11-den.id
                                                                    Definition

                                                                    Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                                                    ShortUnique id for inter-element referencing
                                                                    Control0..1
                                                                    Typestring
                                                                    Is Modifierfalse
                                                                    XML FormatIn the XML format, this property is represented as an attribute.
                                                                    Summaryfalse
                                                                    282. Parameters.parameter:reportNames.part:table6B-Line11.part:table6B-Line11-den.extension
                                                                    Definition

                                                                    May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                                                    ShortAdditional content defined by implementations
                                                                    Comments

                                                                    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                    Control0..*
                                                                    TypeExtension
                                                                    Is Modifierfalse
                                                                    Summaryfalse
                                                                    Alternate Namesextensions, user content
                                                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                    284. Parameters.parameter:reportNames.part:table6B-Line11.part:table6B-Line11-den.modifierExtension
                                                                    Definition

                                                                    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                                                    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                                                    ShortExtensions that cannot be ignored even if unrecognized
                                                                    Comments

                                                                    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                    Control0..*
                                                                    TypeExtension
                                                                    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                                                    Summarytrue
                                                                    Requirements

                                                                    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                                                    Alternate Namesextensions, user content, modifiers
                                                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                    286. Parameters.parameter:reportNames.part:table6B-Line11.part:table6B-Line11-den.name
                                                                    Definition

                                                                    The name of the parameter (reference to the operation definition).

                                                                    ShortName from the definition
                                                                    Control1..1
                                                                    Typestring
                                                                    Is Modifierfalse
                                                                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                    Must Supporttrue
                                                                    Summarytrue
                                                                    Fixed Valuetable6B-Line11-Cervical-Cancer-Screening-CMS124-den
                                                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                    288. Parameters.parameter:reportNames.part:table6B-Line11.part:table6B-Line11-den.value[x]
                                                                    Definition

                                                                    If the parameter is a data type.

                                                                    ShortIf parameter is a data type
                                                                    Control1..1
                                                                    This element is affected by the following invariants: inv-1
                                                                    Typeboolean
                                                                    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                                                    Is Modifierfalse
                                                                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                    Must Supporttrue
                                                                    Summarytrue
                                                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                    290. Parameters.parameter:reportNames.part:table6B-Line11.part:table6B-Line11-den.resource
                                                                    Definition

                                                                    If the parameter is a whole resource.

                                                                    ShortIf parameter is a whole resource
                                                                    Comments

                                                                    When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods.

                                                                    Control0..1
                                                                    This element is affected by the following invariants: inv-1
                                                                    TypeResource
                                                                    Is Modifierfalse
                                                                    Summarytrue
                                                                    292. Parameters.parameter:reportNames.part:table6B-Line11.part:table6B-Line11-den.part
                                                                    Definition

                                                                    A named part of a multi-part parameter.

                                                                    ShortNamed part of a multi-part parameter
                                                                    Comments

                                                                    Only one level of nested parameters is allowed.

                                                                    Control0..*
                                                                    TypeSeettp://hl7.org/fhir/StructureDefinition/Parameters#Parameters.parameter
                                                                    Is Modifierfalse
                                                                    Summarytrue
                                                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                    294. Parameters.parameter:reportNames.part:table6B-Line11.part:table6B-Line11-denexcl
                                                                    Slice Nametable6B-Line11-denexcl
                                                                    Definition

                                                                    A named part of a multi-part parameter.

                                                                    ShortNamed part of a multi-part parameter
                                                                    Comments

                                                                    Only one level of nested parameters is allowed.

                                                                    Control0..1
                                                                    TypeBackboneElement
                                                                    Is Modifierfalse
                                                                    Must Supporttrue
                                                                    Summarytrue
                                                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                    296. Parameters.parameter:reportNames.part:table6B-Line11.part:table6B-Line11-denexcl.id
                                                                    Definition

                                                                    Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                                                    ShortUnique id for inter-element referencing
                                                                    Control0..1
                                                                    Typestring
                                                                    Is Modifierfalse
                                                                    XML FormatIn the XML format, this property is represented as an attribute.
                                                                    Summaryfalse
                                                                    298. Parameters.parameter:reportNames.part:table6B-Line11.part:table6B-Line11-denexcl.extension
                                                                    Definition

                                                                    May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                                                    ShortAdditional content defined by implementations
                                                                    Comments

                                                                    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                    Control0..*
                                                                    TypeExtension
                                                                    Is Modifierfalse
                                                                    Summaryfalse
                                                                    Alternate Namesextensions, user content
                                                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                    300. Parameters.parameter:reportNames.part:table6B-Line11.part:table6B-Line11-denexcl.modifierExtension
                                                                    Definition

                                                                    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                                                    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                                                    ShortExtensions that cannot be ignored even if unrecognized
                                                                    Comments

                                                                    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                    Control0..*
                                                                    TypeExtension
                                                                    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                                                    Summarytrue
                                                                    Requirements

                                                                    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                                                    Alternate Namesextensions, user content, modifiers
                                                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                    302. Parameters.parameter:reportNames.part:table6B-Line11.part:table6B-Line11-denexcl.name
                                                                    Definition

                                                                    The name of the parameter (reference to the operation definition).

                                                                    ShortName from the definition
                                                                    Control1..1
                                                                    Typestring
                                                                    Is Modifierfalse
                                                                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                    Must Supporttrue
                                                                    Summarytrue
                                                                    Fixed Valuetable6B-Line11-Cervical-Cancer-Screening-CMS124-denexcl
                                                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                    304. Parameters.parameter:reportNames.part:table6B-Line11.part:table6B-Line11-denexcl.value[x]
                                                                    Definition

                                                                    If the parameter is a data type.

                                                                    ShortIf parameter is a data type
                                                                    Control1..1
                                                                    This element is affected by the following invariants: inv-1
                                                                    Typeboolean
                                                                    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                                                    Is Modifierfalse
                                                                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                    Must Supporttrue
                                                                    Summarytrue
                                                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                    306. Parameters.parameter:reportNames.part:table6B-Line11.part:table6B-Line11-denexcl.resource
                                                                    Definition

                                                                    If the parameter is a whole resource.

                                                                    ShortIf parameter is a whole resource
                                                                    Comments

                                                                    When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods.

                                                                    Control0..1
                                                                    This element is affected by the following invariants: inv-1
                                                                    TypeResource
                                                                    Is Modifierfalse
                                                                    Summarytrue
                                                                    308. Parameters.parameter:reportNames.part:table6B-Line11.part:table6B-Line11-denexcl.part
                                                                    Definition

                                                                    A named part of a multi-part parameter.

                                                                    ShortNamed part of a multi-part parameter
                                                                    Comments

                                                                    Only one level of nested parameters is allowed.

                                                                    Control0..*
                                                                    TypeSeettp://hl7.org/fhir/StructureDefinition/Parameters#Parameters.parameter
                                                                    Is Modifierfalse
                                                                    Summarytrue
                                                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                    310. Parameters.parameter:reportNames.part:table6B-Line11.part:table6B-Line11-num
                                                                    Slice Nametable6B-Line11-num
                                                                    Definition

                                                                    A named part of a multi-part parameter.

                                                                    ShortNamed part of a multi-part parameter
                                                                    Comments

                                                                    Only one level of nested parameters is allowed.

                                                                    Control0..1
                                                                    TypeBackboneElement
                                                                    Is Modifierfalse
                                                                    Must Supporttrue
                                                                    Summarytrue
                                                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                    312. Parameters.parameter:reportNames.part:table6B-Line11.part:table6B-Line11-num.id
                                                                    Definition

                                                                    Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                                                    ShortUnique id for inter-element referencing
                                                                    Control0..1
                                                                    Typestring
                                                                    Is Modifierfalse
                                                                    XML FormatIn the XML format, this property is represented as an attribute.
                                                                    Summaryfalse
                                                                    314. Parameters.parameter:reportNames.part:table6B-Line11.part:table6B-Line11-num.extension
                                                                    Definition

                                                                    May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                                                    ShortAdditional content defined by implementations
                                                                    Comments

                                                                    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                    Control0..*
                                                                    TypeExtension
                                                                    Is Modifierfalse
                                                                    Summaryfalse
                                                                    Alternate Namesextensions, user content
                                                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                    316. Parameters.parameter:reportNames.part:table6B-Line11.part:table6B-Line11-num.modifierExtension
                                                                    Definition

                                                                    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                                                    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                                                    ShortExtensions that cannot be ignored even if unrecognized
                                                                    Comments

                                                                    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                    Control0..*
                                                                    TypeExtension
                                                                    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                                                    Summarytrue
                                                                    Requirements

                                                                    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                                                    Alternate Namesextensions, user content, modifiers
                                                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                    318. Parameters.parameter:reportNames.part:table6B-Line11.part:table6B-Line11-num.name
                                                                    Definition

                                                                    The name of the parameter (reference to the operation definition).

                                                                    ShortName from the definition
                                                                    Control1..1
                                                                    Typestring
                                                                    Is Modifierfalse
                                                                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                    Must Supporttrue
                                                                    Summarytrue
                                                                    Fixed Valuetable6B-Line11-Cervical-Cancer-Screening-CMS124-num
                                                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                    320. Parameters.parameter:reportNames.part:table6B-Line11.part:table6B-Line11-num.value[x]
                                                                    Definition

                                                                    If the parameter is a data type.

                                                                    ShortIf parameter is a data type
                                                                    Control1..1
                                                                    This element is affected by the following invariants: inv-1
                                                                    Typeboolean
                                                                    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                                                    Is Modifierfalse
                                                                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                    Must Supporttrue
                                                                    Summarytrue
                                                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                    322. Parameters.parameter:reportNames.part:table6B-Line11.part:table6B-Line11-num.resource
                                                                    Definition

                                                                    If the parameter is a whole resource.

                                                                    ShortIf parameter is a whole resource
                                                                    Comments

                                                                    When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods.

                                                                    Control0..1
                                                                    This element is affected by the following invariants: inv-1
                                                                    TypeResource
                                                                    Is Modifierfalse
                                                                    Summarytrue
                                                                    324. Parameters.parameter:reportNames.part:table6B-Line11.part:table6B-Line11-num.part
                                                                    Definition

                                                                    A named part of a multi-part parameter.

                                                                    ShortNamed part of a multi-part parameter
                                                                    Comments

                                                                    Only one level of nested parameters is allowed.

                                                                    Control0..*
                                                                    TypeSeettp://hl7.org/fhir/StructureDefinition/Parameters#Parameters.parameter
                                                                    Is Modifierfalse
                                                                    Summarytrue
                                                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                    326. Parameters.parameter:reportNames.part:table6B-Line11a
                                                                    Slice Nametable6B-Line11a
                                                                    Definition

                                                                    A named part of a multi-part parameter.

                                                                    ShortNamed part of a multi-part parameter
                                                                    Comments

                                                                    Only one level of nested parameters is allowed.

                                                                    Control1..1
                                                                    TypeBackboneElement
                                                                    Is Modifierfalse
                                                                    Must Supporttrue
                                                                    Summarytrue
                                                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                    328. Parameters.parameter:reportNames.part:table6B-Line11a.id
                                                                    Definition

                                                                    Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                                                    ShortUnique id for inter-element referencing
                                                                    Control0..1
                                                                    Typestring
                                                                    Is Modifierfalse
                                                                    XML FormatIn the XML format, this property is represented as an attribute.
                                                                    Summaryfalse
                                                                    330. Parameters.parameter:reportNames.part:table6B-Line11a.extension
                                                                    Definition

                                                                    May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                                                    ShortAdditional content defined by implementations
                                                                    Comments

                                                                    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                    Control0..*
                                                                    TypeExtension
                                                                    Is Modifierfalse
                                                                    Summaryfalse
                                                                    Alternate Namesextensions, user content
                                                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                    332. Parameters.parameter:reportNames.part:table6B-Line11a.modifierExtension
                                                                    Definition

                                                                    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                                                    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                                                    ShortExtensions that cannot be ignored even if unrecognized
                                                                    Comments

                                                                    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                    Control0..*
                                                                    TypeExtension
                                                                    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                                                    Summarytrue
                                                                    Requirements

                                                                    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                                                    Alternate Namesextensions, user content, modifiers
                                                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                    334. Parameters.parameter:reportNames.part:table6B-Line11a.name
                                                                    Definition

                                                                    The name of the parameter (reference to the operation definition).

                                                                    ShortName from the definition
                                                                    Control1..1
                                                                    Typestring
                                                                    Is Modifierfalse
                                                                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                    Must Supporttrue
                                                                    Summarytrue
                                                                    Fixed Valuetable6B-Line11a-Breast-Cancer-Screening-CMS125
                                                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                    336. Parameters.parameter:reportNames.part:table6B-Line11a.value[x]
                                                                    Definition

                                                                    If the parameter is a data type.

                                                                    ShortIf parameter is a data type
                                                                    Control1..1
                                                                    This element is affected by the following invariants: inv-1
                                                                    Typeboolean
                                                                    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                                                    Is Modifierfalse
                                                                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                    Must Supporttrue
                                                                    Summarytrue
                                                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                    338. Parameters.parameter:reportNames.part:table6B-Line11a.resource
                                                                    Definition

                                                                    If the parameter is a whole resource.

                                                                    ShortIf parameter is a whole resource
                                                                    Comments

                                                                    When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods.

                                                                    Control0..1
                                                                    This element is affected by the following invariants: inv-1
                                                                    TypeResource
                                                                    Is Modifierfalse
                                                                    Summarytrue
                                                                    340. Parameters.parameter:reportNames.part:table6B-Line11a.part
                                                                    Definition

                                                                    A named part of a multi-part parameter.

                                                                    ShortNamed part of a multi-part parameter
                                                                    Comments

                                                                    Only one level of nested parameters is allowed.

                                                                    Control0..*
                                                                    TypeSeettp://hl7.org/fhir/StructureDefinition/Parameters#Parameters.parameter
                                                                    Is Modifierfalse
                                                                    Must Supporttrue
                                                                    Summarytrue
                                                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                    SlicingThis element introduces a set of slices on Parameters.parameter.part.part. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                                                                    • value @ $this.name
                                                                    • 342. Parameters.parameter:reportNames.part:table6B-Line11a.part:table6B-Line11a-den
                                                                      Slice Nametable6B-Line11a-den
                                                                      Definition

                                                                      A named part of a multi-part parameter.

                                                                      ShortNamed part of a multi-part parameter
                                                                      Comments

                                                                      Only one level of nested parameters is allowed.

                                                                      Control0..1
                                                                      TypeBackboneElement
                                                                      Is Modifierfalse
                                                                      Must Supporttrue
                                                                      Summarytrue
                                                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                      344. Parameters.parameter:reportNames.part:table6B-Line11a.part:table6B-Line11a-den.id
                                                                      Definition

                                                                      Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                                                      ShortUnique id for inter-element referencing
                                                                      Control0..1
                                                                      Typestring
                                                                      Is Modifierfalse
                                                                      XML FormatIn the XML format, this property is represented as an attribute.
                                                                      Summaryfalse
                                                                      346. Parameters.parameter:reportNames.part:table6B-Line11a.part:table6B-Line11a-den.extension
                                                                      Definition

                                                                      May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                                                      ShortAdditional content defined by implementations
                                                                      Comments

                                                                      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                      Control0..*
                                                                      TypeExtension
                                                                      Is Modifierfalse
                                                                      Summaryfalse
                                                                      Alternate Namesextensions, user content
                                                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                      348. Parameters.parameter:reportNames.part:table6B-Line11a.part:table6B-Line11a-den.modifierExtension
                                                                      Definition

                                                                      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                                                      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                                                      ShortExtensions that cannot be ignored even if unrecognized
                                                                      Comments

                                                                      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                      Control0..*
                                                                      TypeExtension
                                                                      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                                                      Summarytrue
                                                                      Requirements

                                                                      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                                                      Alternate Namesextensions, user content, modifiers
                                                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                      350. Parameters.parameter:reportNames.part:table6B-Line11a.part:table6B-Line11a-den.name
                                                                      Definition

                                                                      The name of the parameter (reference to the operation definition).

                                                                      ShortName from the definition
                                                                      Control1..1
                                                                      Typestring
                                                                      Is Modifierfalse
                                                                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                      Must Supporttrue
                                                                      Summarytrue
                                                                      Fixed Valuetable6B-Line11a-Breast-Cancer-Screening-CMS125-den
                                                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                      352. Parameters.parameter:reportNames.part:table6B-Line11a.part:table6B-Line11a-den.value[x]
                                                                      Definition

                                                                      If the parameter is a data type.

                                                                      ShortIf parameter is a data type
                                                                      Control1..1
                                                                      This element is affected by the following invariants: inv-1
                                                                      Typeboolean
                                                                      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                                                      Is Modifierfalse
                                                                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                      Must Supporttrue
                                                                      Summarytrue
                                                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                      354. Parameters.parameter:reportNames.part:table6B-Line11a.part:table6B-Line11a-den.resource
                                                                      Definition

                                                                      If the parameter is a whole resource.

                                                                      ShortIf parameter is a whole resource
                                                                      Comments

                                                                      When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods.

                                                                      Control0..1
                                                                      This element is affected by the following invariants: inv-1
                                                                      TypeResource
                                                                      Is Modifierfalse
                                                                      Summarytrue
                                                                      356. Parameters.parameter:reportNames.part:table6B-Line11a.part:table6B-Line11a-den.part
                                                                      Definition

                                                                      A named part of a multi-part parameter.

                                                                      ShortNamed part of a multi-part parameter
                                                                      Comments

                                                                      Only one level of nested parameters is allowed.

                                                                      Control0..*
                                                                      TypeSeettp://hl7.org/fhir/StructureDefinition/Parameters#Parameters.parameter
                                                                      Is Modifierfalse
                                                                      Summarytrue
                                                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                      358. Parameters.parameter:reportNames.part:table6B-Line11a.part:table6B-Line11a-denexcl
                                                                      Slice Nametable6B-Line11a-denexcl
                                                                      Definition

                                                                      A named part of a multi-part parameter.

                                                                      ShortNamed part of a multi-part parameter
                                                                      Comments

                                                                      Only one level of nested parameters is allowed.

                                                                      Control0..1
                                                                      TypeBackboneElement
                                                                      Is Modifierfalse
                                                                      Must Supporttrue
                                                                      Summarytrue
                                                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                      360. Parameters.parameter:reportNames.part:table6B-Line11a.part:table6B-Line11a-denexcl.id
                                                                      Definition

                                                                      Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                                                      ShortUnique id for inter-element referencing
                                                                      Control0..1
                                                                      Typestring
                                                                      Is Modifierfalse
                                                                      XML FormatIn the XML format, this property is represented as an attribute.
                                                                      Summaryfalse
                                                                      362. Parameters.parameter:reportNames.part:table6B-Line11a.part:table6B-Line11a-denexcl.extension
                                                                      Definition

                                                                      May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                                                      ShortAdditional content defined by implementations
                                                                      Comments

                                                                      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                      Control0..*
                                                                      TypeExtension
                                                                      Is Modifierfalse
                                                                      Summaryfalse
                                                                      Alternate Namesextensions, user content
                                                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                      364. Parameters.parameter:reportNames.part:table6B-Line11a.part:table6B-Line11a-denexcl.modifierExtension
                                                                      Definition

                                                                      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                                                      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                                                      ShortExtensions that cannot be ignored even if unrecognized
                                                                      Comments

                                                                      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                      Control0..*
                                                                      TypeExtension
                                                                      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                                                      Summarytrue
                                                                      Requirements

                                                                      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                                                      Alternate Namesextensions, user content, modifiers
                                                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                      366. Parameters.parameter:reportNames.part:table6B-Line11a.part:table6B-Line11a-denexcl.name
                                                                      Definition

                                                                      The name of the parameter (reference to the operation definition).

                                                                      ShortName from the definition
                                                                      Control1..1
                                                                      Typestring
                                                                      Is Modifierfalse
                                                                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                      Must Supporttrue
                                                                      Summarytrue
                                                                      Fixed Valuetable6B-Line11a-Breast-Cancer-Screening-CMS125-denexcl
                                                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                      368. Parameters.parameter:reportNames.part:table6B-Line11a.part:table6B-Line11a-denexcl.value[x]
                                                                      Definition

                                                                      If the parameter is a data type.

                                                                      ShortIf parameter is a data type
                                                                      Control1..1
                                                                      This element is affected by the following invariants: inv-1
                                                                      Typeboolean
                                                                      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                                                      Is Modifierfalse
                                                                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                      Must Supporttrue
                                                                      Summarytrue
                                                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                      370. Parameters.parameter:reportNames.part:table6B-Line11a.part:table6B-Line11a-denexcl.resource
                                                                      Definition

                                                                      If the parameter is a whole resource.

                                                                      ShortIf parameter is a whole resource
                                                                      Comments

                                                                      When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods.

                                                                      Control0..1
                                                                      This element is affected by the following invariants: inv-1
                                                                      TypeResource
                                                                      Is Modifierfalse
                                                                      Summarytrue
                                                                      372. Parameters.parameter:reportNames.part:table6B-Line11a.part:table6B-Line11a-denexcl.part
                                                                      Definition

                                                                      A named part of a multi-part parameter.

                                                                      ShortNamed part of a multi-part parameter
                                                                      Comments

                                                                      Only one level of nested parameters is allowed.

                                                                      Control0..*
                                                                      TypeSeettp://hl7.org/fhir/StructureDefinition/Parameters#Parameters.parameter
                                                                      Is Modifierfalse
                                                                      Summarytrue
                                                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                      374. Parameters.parameter:reportNames.part:table6B-Line11a.part:table6B-Line11a-num
                                                                      Slice Nametable6B-Line11a-num
                                                                      Definition

                                                                      A named part of a multi-part parameter.

                                                                      ShortNamed part of a multi-part parameter
                                                                      Comments

                                                                      Only one level of nested parameters is allowed.

                                                                      Control0..1
                                                                      TypeBackboneElement
                                                                      Is Modifierfalse
                                                                      Must Supporttrue
                                                                      Summarytrue
                                                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                      376. Parameters.parameter:reportNames.part:table6B-Line11a.part:table6B-Line11a-num.id
                                                                      Definition

                                                                      Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                                                      ShortUnique id for inter-element referencing
                                                                      Control0..1
                                                                      Typestring
                                                                      Is Modifierfalse
                                                                      XML FormatIn the XML format, this property is represented as an attribute.
                                                                      Summaryfalse
                                                                      378. Parameters.parameter:reportNames.part:table6B-Line11a.part:table6B-Line11a-num.extension
                                                                      Definition

                                                                      May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                                                      ShortAdditional content defined by implementations
                                                                      Comments

                                                                      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                      Control0..*
                                                                      TypeExtension
                                                                      Is Modifierfalse
                                                                      Summaryfalse
                                                                      Alternate Namesextensions, user content
                                                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                      380. Parameters.parameter:reportNames.part:table6B-Line11a.part:table6B-Line11a-num.modifierExtension
                                                                      Definition

                                                                      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                                                      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                                                      ShortExtensions that cannot be ignored even if unrecognized
                                                                      Comments

                                                                      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                      Control0..*
                                                                      TypeExtension
                                                                      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                                                      Summarytrue
                                                                      Requirements

                                                                      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                                                      Alternate Namesextensions, user content, modifiers
                                                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                      382. Parameters.parameter:reportNames.part:table6B-Line11a.part:table6B-Line11a-num.name
                                                                      Definition

                                                                      The name of the parameter (reference to the operation definition).

                                                                      ShortName from the definition
                                                                      Control1..1
                                                                      Typestring
                                                                      Is Modifierfalse
                                                                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                      Must Supporttrue
                                                                      Summarytrue
                                                                      Fixed Valuetable6B-Line11a-Breast-Cancer-Screening-CMS125-num
                                                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                      384. Parameters.parameter:reportNames.part:table6B-Line11a.part:table6B-Line11a-num.value[x]
                                                                      Definition

                                                                      If the parameter is a data type.

                                                                      ShortIf parameter is a data type
                                                                      Control1..1
                                                                      This element is affected by the following invariants: inv-1
                                                                      Typeboolean
                                                                      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                                                      Is Modifierfalse
                                                                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                      Must Supporttrue
                                                                      Summarytrue
                                                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                      386. Parameters.parameter:reportNames.part:table6B-Line11a.part:table6B-Line11a-num.resource
                                                                      Definition

                                                                      If the parameter is a whole resource.

                                                                      ShortIf parameter is a whole resource
                                                                      Comments

                                                                      When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods.

                                                                      Control0..1
                                                                      This element is affected by the following invariants: inv-1
                                                                      TypeResource
                                                                      Is Modifierfalse
                                                                      Summarytrue
                                                                      388. Parameters.parameter:reportNames.part:table6B-Line11a.part:table6B-Line11a-num.part
                                                                      Definition

                                                                      A named part of a multi-part parameter.

                                                                      ShortNamed part of a multi-part parameter
                                                                      Comments

                                                                      Only one level of nested parameters is allowed.

                                                                      Control0..*
                                                                      TypeSeettp://hl7.org/fhir/StructureDefinition/Parameters#Parameters.parameter
                                                                      Is Modifierfalse
                                                                      Summarytrue
                                                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                      390. Parameters.parameter:reportNames.part:table6B-Line12
                                                                      Slice Nametable6B-Line12
                                                                      Definition

                                                                      A named part of a multi-part parameter.

                                                                      ShortNamed part of a multi-part parameter
                                                                      Comments

                                                                      Only one level of nested parameters is allowed.

                                                                      Control1..1
                                                                      TypeBackboneElement
                                                                      Is Modifierfalse
                                                                      Must Supporttrue
                                                                      Summarytrue
                                                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                      392. Parameters.parameter:reportNames.part:table6B-Line12.id
                                                                      Definition

                                                                      Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                                                      ShortUnique id for inter-element referencing
                                                                      Control0..1
                                                                      Typestring
                                                                      Is Modifierfalse
                                                                      XML FormatIn the XML format, this property is represented as an attribute.
                                                                      Summaryfalse
                                                                      394. Parameters.parameter:reportNames.part:table6B-Line12.extension
                                                                      Definition

                                                                      May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                                                      ShortAdditional content defined by implementations
                                                                      Comments

                                                                      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                      Control0..*
                                                                      TypeExtension
                                                                      Is Modifierfalse
                                                                      Summaryfalse
                                                                      Alternate Namesextensions, user content
                                                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                      396. Parameters.parameter:reportNames.part:table6B-Line12.modifierExtension
                                                                      Definition

                                                                      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                                                      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                                                      ShortExtensions that cannot be ignored even if unrecognized
                                                                      Comments

                                                                      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                      Control0..*
                                                                      TypeExtension
                                                                      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                                                      Summarytrue
                                                                      Requirements

                                                                      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                                                      Alternate Namesextensions, user content, modifiers
                                                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                      398. Parameters.parameter:reportNames.part:table6B-Line12.name
                                                                      Definition

                                                                      The name of the parameter (reference to the operation definition).

                                                                      ShortName from the definition
                                                                      Control1..1
                                                                      Typestring
                                                                      Is Modifierfalse
                                                                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                      Must Supporttrue
                                                                      Summarytrue
                                                                      Fixed Valuetable6B-Line12-Weight-Assessment-And-Counselling-CMS155
                                                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                      400. Parameters.parameter:reportNames.part:table6B-Line12.value[x]
                                                                      Definition

                                                                      If the parameter is a data type.

                                                                      ShortIf parameter is a data type
                                                                      Control1..1
                                                                      This element is affected by the following invariants: inv-1
                                                                      Typeboolean
                                                                      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                                                      Is Modifierfalse
                                                                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                      Must Supporttrue
                                                                      Summarytrue
                                                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                      402. Parameters.parameter:reportNames.part:table6B-Line12.resource
                                                                      Definition

                                                                      If the parameter is a whole resource.

                                                                      ShortIf parameter is a whole resource
                                                                      Comments

                                                                      When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods.

                                                                      Control0..1
                                                                      This element is affected by the following invariants: inv-1
                                                                      TypeResource
                                                                      Is Modifierfalse
                                                                      Summarytrue
                                                                      404. Parameters.parameter:reportNames.part:table6B-Line12.part
                                                                      Definition

                                                                      A named part of a multi-part parameter.

                                                                      ShortNamed part of a multi-part parameter
                                                                      Comments

                                                                      Only one level of nested parameters is allowed.

                                                                      Control0..*
                                                                      TypeSeettp://hl7.org/fhir/StructureDefinition/Parameters#Parameters.parameter
                                                                      Is Modifierfalse
                                                                      Must Supporttrue
                                                                      Summarytrue
                                                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                      SlicingThis element introduces a set of slices on Parameters.parameter.part.part. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                                                                      • value @ $this.name
                                                                      • 406. Parameters.parameter:reportNames.part:table6B-Line12.part:table6B-Line12-den
                                                                        Slice Nametable6B-Line12-den
                                                                        Definition

                                                                        A named part of a multi-part parameter.

                                                                        ShortNamed part of a multi-part parameter
                                                                        Comments

                                                                        Only one level of nested parameters is allowed.

                                                                        Control0..1
                                                                        TypeBackboneElement
                                                                        Is Modifierfalse
                                                                        Must Supporttrue
                                                                        Summarytrue
                                                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                        408. Parameters.parameter:reportNames.part:table6B-Line12.part:table6B-Line12-den.id
                                                                        Definition

                                                                        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                                                        ShortUnique id for inter-element referencing
                                                                        Control0..1
                                                                        Typestring
                                                                        Is Modifierfalse
                                                                        XML FormatIn the XML format, this property is represented as an attribute.
                                                                        Summaryfalse
                                                                        410. Parameters.parameter:reportNames.part:table6B-Line12.part:table6B-Line12-den.extension
                                                                        Definition

                                                                        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                                                        ShortAdditional content defined by implementations
                                                                        Comments

                                                                        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                        Control0..*
                                                                        TypeExtension
                                                                        Is Modifierfalse
                                                                        Summaryfalse
                                                                        Alternate Namesextensions, user content
                                                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                        412. Parameters.parameter:reportNames.part:table6B-Line12.part:table6B-Line12-den.modifierExtension
                                                                        Definition

                                                                        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                                                        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                                                        ShortExtensions that cannot be ignored even if unrecognized
                                                                        Comments

                                                                        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                        Control0..*
                                                                        TypeExtension
                                                                        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                                                        Summarytrue
                                                                        Requirements

                                                                        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                                                        Alternate Namesextensions, user content, modifiers
                                                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                        414. Parameters.parameter:reportNames.part:table6B-Line12.part:table6B-Line12-den.name
                                                                        Definition

                                                                        The name of the parameter (reference to the operation definition).

                                                                        ShortName from the definition
                                                                        Control1..1
                                                                        Typestring
                                                                        Is Modifierfalse
                                                                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                        Must Supporttrue
                                                                        Summarytrue
                                                                        Fixed Valuetable6B-Line12-Weight-Assessment-And-Counselling-CMS155-den
                                                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                        416. Parameters.parameter:reportNames.part:table6B-Line12.part:table6B-Line12-den.value[x]
                                                                        Definition

                                                                        If the parameter is a data type.

                                                                        ShortIf parameter is a data type
                                                                        Control1..1
                                                                        This element is affected by the following invariants: inv-1
                                                                        Typeboolean
                                                                        [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                                                        Is Modifierfalse
                                                                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                        Must Supporttrue
                                                                        Summarytrue
                                                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                        418. Parameters.parameter:reportNames.part:table6B-Line12.part:table6B-Line12-den.resource
                                                                        Definition

                                                                        If the parameter is a whole resource.

                                                                        ShortIf parameter is a whole resource
                                                                        Comments

                                                                        When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods.

                                                                        Control0..1
                                                                        This element is affected by the following invariants: inv-1
                                                                        TypeResource
                                                                        Is Modifierfalse
                                                                        Summarytrue
                                                                        420. Parameters.parameter:reportNames.part:table6B-Line12.part:table6B-Line12-den.part
                                                                        Definition

                                                                        A named part of a multi-part parameter.

                                                                        ShortNamed part of a multi-part parameter
                                                                        Comments

                                                                        Only one level of nested parameters is allowed.

                                                                        Control0..*
                                                                        TypeSeettp://hl7.org/fhir/StructureDefinition/Parameters#Parameters.parameter
                                                                        Is Modifierfalse
                                                                        Summarytrue
                                                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                        422. Parameters.parameter:reportNames.part:table6B-Line12.part:table6B-Line12-denexcl
                                                                        Slice Nametable6B-Line12-denexcl
                                                                        Definition

                                                                        A named part of a multi-part parameter.

                                                                        ShortNamed part of a multi-part parameter
                                                                        Comments

                                                                        Only one level of nested parameters is allowed.

                                                                        Control0..1
                                                                        TypeBackboneElement
                                                                        Is Modifierfalse
                                                                        Must Supporttrue
                                                                        Summarytrue
                                                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                        424. Parameters.parameter:reportNames.part:table6B-Line12.part:table6B-Line12-denexcl.id
                                                                        Definition

                                                                        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                                                        ShortUnique id for inter-element referencing
                                                                        Control0..1
                                                                        Typestring
                                                                        Is Modifierfalse
                                                                        XML FormatIn the XML format, this property is represented as an attribute.
                                                                        Summaryfalse
                                                                        426. Parameters.parameter:reportNames.part:table6B-Line12.part:table6B-Line12-denexcl.extension
                                                                        Definition

                                                                        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                                                        ShortAdditional content defined by implementations
                                                                        Comments

                                                                        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                        Control0..*
                                                                        TypeExtension
                                                                        Is Modifierfalse
                                                                        Summaryfalse
                                                                        Alternate Namesextensions, user content
                                                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                        428. Parameters.parameter:reportNames.part:table6B-Line12.part:table6B-Line12-denexcl.modifierExtension
                                                                        Definition

                                                                        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                                                        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                                                        ShortExtensions that cannot be ignored even if unrecognized
                                                                        Comments

                                                                        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                        Control0..*
                                                                        TypeExtension
                                                                        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                                                        Summarytrue
                                                                        Requirements

                                                                        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                                                        Alternate Namesextensions, user content, modifiers
                                                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                        430. Parameters.parameter:reportNames.part:table6B-Line12.part:table6B-Line12-denexcl.name
                                                                        Definition

                                                                        The name of the parameter (reference to the operation definition).

                                                                        ShortName from the definition
                                                                        Control1..1
                                                                        Typestring
                                                                        Is Modifierfalse
                                                                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                        Must Supporttrue
                                                                        Summarytrue
                                                                        Fixed Valuetable6B-Line12-Weight-Assessment-And-Counselling-CMS155-denexcl
                                                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                        432. Parameters.parameter:reportNames.part:table6B-Line12.part:table6B-Line12-denexcl.value[x]
                                                                        Definition

                                                                        If the parameter is a data type.

                                                                        ShortIf parameter is a data type
                                                                        Control1..1
                                                                        This element is affected by the following invariants: inv-1
                                                                        Typeboolean
                                                                        [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                                                        Is Modifierfalse
                                                                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                        Must Supporttrue
                                                                        Summarytrue
                                                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                        434. Parameters.parameter:reportNames.part:table6B-Line12.part:table6B-Line12-denexcl.resource
                                                                        Definition

                                                                        If the parameter is a whole resource.

                                                                        ShortIf parameter is a whole resource
                                                                        Comments

                                                                        When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods.

                                                                        Control0..1
                                                                        This element is affected by the following invariants: inv-1
                                                                        TypeResource
                                                                        Is Modifierfalse
                                                                        Summarytrue
                                                                        436. Parameters.parameter:reportNames.part:table6B-Line12.part:table6B-Line12-denexcl.part
                                                                        Definition

                                                                        A named part of a multi-part parameter.

                                                                        ShortNamed part of a multi-part parameter
                                                                        Comments

                                                                        Only one level of nested parameters is allowed.

                                                                        Control0..*
                                                                        TypeSeettp://hl7.org/fhir/StructureDefinition/Parameters#Parameters.parameter
                                                                        Is Modifierfalse
                                                                        Summarytrue
                                                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                        438. Parameters.parameter:reportNames.part:table6B-Line12.part:table6B-Line12-num
                                                                        Slice Nametable6B-Line12-num
                                                                        Definition

                                                                        A named part of a multi-part parameter.

                                                                        ShortNamed part of a multi-part parameter
                                                                        Comments

                                                                        Only one level of nested parameters is allowed.

                                                                        Control0..1
                                                                        TypeBackboneElement
                                                                        Is Modifierfalse
                                                                        Must Supporttrue
                                                                        Summarytrue
                                                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                        440. Parameters.parameter:reportNames.part:table6B-Line12.part:table6B-Line12-num.id
                                                                        Definition

                                                                        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                                                        ShortUnique id for inter-element referencing
                                                                        Control0..1
                                                                        Typestring
                                                                        Is Modifierfalse
                                                                        XML FormatIn the XML format, this property is represented as an attribute.
                                                                        Summaryfalse
                                                                        442. Parameters.parameter:reportNames.part:table6B-Line12.part:table6B-Line12-num.extension
                                                                        Definition

                                                                        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                                                        ShortAdditional content defined by implementations
                                                                        Comments

                                                                        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                        Control0..*
                                                                        TypeExtension
                                                                        Is Modifierfalse
                                                                        Summaryfalse
                                                                        Alternate Namesextensions, user content
                                                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                        444. Parameters.parameter:reportNames.part:table6B-Line12.part:table6B-Line12-num.modifierExtension
                                                                        Definition

                                                                        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                                                        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                                                        ShortExtensions that cannot be ignored even if unrecognized
                                                                        Comments

                                                                        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                        Control0..*
                                                                        TypeExtension
                                                                        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                                                        Summarytrue
                                                                        Requirements

                                                                        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                                                        Alternate Namesextensions, user content, modifiers
                                                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                        446. Parameters.parameter:reportNames.part:table6B-Line12.part:table6B-Line12-num.name
                                                                        Definition

                                                                        The name of the parameter (reference to the operation definition).

                                                                        ShortName from the definition
                                                                        Control1..1
                                                                        Typestring
                                                                        Is Modifierfalse
                                                                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                        Must Supporttrue
                                                                        Summarytrue
                                                                        Fixed Valuetable6B-Line12-Weight-Assessment-And-Counselling-CMS155-num
                                                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                        448. Parameters.parameter:reportNames.part:table6B-Line12.part:table6B-Line12-num.value[x]
                                                                        Definition

                                                                        If the parameter is a data type.

                                                                        ShortIf parameter is a data type
                                                                        Control1..1
                                                                        This element is affected by the following invariants: inv-1
                                                                        Typeboolean
                                                                        [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                                                        Is Modifierfalse
                                                                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                        Must Supporttrue
                                                                        Summarytrue
                                                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                        450. Parameters.parameter:reportNames.part:table6B-Line12.part:table6B-Line12-num.resource
                                                                        Definition

                                                                        If the parameter is a whole resource.

                                                                        ShortIf parameter is a whole resource
                                                                        Comments

                                                                        When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods.

                                                                        Control0..1
                                                                        This element is affected by the following invariants: inv-1
                                                                        TypeResource
                                                                        Is Modifierfalse
                                                                        Summarytrue
                                                                        452. Parameters.parameter:reportNames.part:table6B-Line12.part:table6B-Line12-num.part
                                                                        Definition

                                                                        A named part of a multi-part parameter.

                                                                        ShortNamed part of a multi-part parameter
                                                                        Comments

                                                                        Only one level of nested parameters is allowed.

                                                                        Control0..*
                                                                        TypeSeettp://hl7.org/fhir/StructureDefinition/Parameters#Parameters.parameter
                                                                        Is Modifierfalse
                                                                        Summarytrue
                                                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                        454. Parameters.parameter:reportNames.part:table6B-Line13
                                                                        Slice Nametable6B-Line13
                                                                        Definition

                                                                        A named part of a multi-part parameter.

                                                                        ShortNamed part of a multi-part parameter
                                                                        Comments

                                                                        Only one level of nested parameters is allowed.

                                                                        Control1..1
                                                                        TypeBackboneElement
                                                                        Is Modifierfalse
                                                                        Must Supporttrue
                                                                        Summarytrue
                                                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                        456. Parameters.parameter:reportNames.part:table6B-Line13.id
                                                                        Definition

                                                                        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                                                        ShortUnique id for inter-element referencing
                                                                        Control0..1
                                                                        Typestring
                                                                        Is Modifierfalse
                                                                        XML FormatIn the XML format, this property is represented as an attribute.
                                                                        Summaryfalse
                                                                        458. Parameters.parameter:reportNames.part:table6B-Line13.extension
                                                                        Definition

                                                                        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                                                        ShortAdditional content defined by implementations
                                                                        Comments

                                                                        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                        Control0..*
                                                                        TypeExtension
                                                                        Is Modifierfalse
                                                                        Summaryfalse
                                                                        Alternate Namesextensions, user content
                                                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                        460. Parameters.parameter:reportNames.part:table6B-Line13.modifierExtension
                                                                        Definition

                                                                        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                                                        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                                                        ShortExtensions that cannot be ignored even if unrecognized
                                                                        Comments

                                                                        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                        Control0..*
                                                                        TypeExtension
                                                                        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                                                        Summarytrue
                                                                        Requirements

                                                                        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                                                        Alternate Namesextensions, user content, modifiers
                                                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                        462. Parameters.parameter:reportNames.part:table6B-Line13.name
                                                                        Definition

                                                                        The name of the parameter (reference to the operation definition).

                                                                        ShortName from the definition
                                                                        Control1..1
                                                                        Typestring
                                                                        Is Modifierfalse
                                                                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                        Must Supporttrue
                                                                        Summarytrue
                                                                        Fixed Valuetable6B-Line13-Preventive-Care-And-Screening-BMI-CMS69
                                                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                        464. Parameters.parameter:reportNames.part:table6B-Line13.value[x]
                                                                        Definition

                                                                        If the parameter is a data type.

                                                                        ShortIf parameter is a data type
                                                                        Control1..1
                                                                        This element is affected by the following invariants: inv-1
                                                                        Typeboolean
                                                                        [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                                                        Is Modifierfalse
                                                                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                        Must Supporttrue
                                                                        Summarytrue
                                                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                        466. Parameters.parameter:reportNames.part:table6B-Line13.resource
                                                                        Definition

                                                                        If the parameter is a whole resource.

                                                                        ShortIf parameter is a whole resource
                                                                        Comments

                                                                        When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods.

                                                                        Control0..1
                                                                        This element is affected by the following invariants: inv-1
                                                                        TypeResource
                                                                        Is Modifierfalse
                                                                        Summarytrue
                                                                        468. Parameters.parameter:reportNames.part:table6B-Line13.part
                                                                        Definition

                                                                        A named part of a multi-part parameter.

                                                                        ShortNamed part of a multi-part parameter
                                                                        Comments

                                                                        Only one level of nested parameters is allowed.

                                                                        Control0..*
                                                                        TypeSeettp://hl7.org/fhir/StructureDefinition/Parameters#Parameters.parameter
                                                                        Is Modifierfalse
                                                                        Must Supporttrue
                                                                        Summarytrue
                                                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                        SlicingThis element introduces a set of slices on Parameters.parameter.part.part. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                                                                        • value @ $this.name
                                                                        • 470. Parameters.parameter:reportNames.part:table6B-Line13.part:table6B-Line13-den
                                                                          Slice Nametable6B-Line13-den
                                                                          Definition

                                                                          A named part of a multi-part parameter.

                                                                          ShortNamed part of a multi-part parameter
                                                                          Comments

                                                                          Only one level of nested parameters is allowed.

                                                                          Control0..1
                                                                          TypeBackboneElement
                                                                          Is Modifierfalse
                                                                          Must Supporttrue
                                                                          Summarytrue
                                                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                          472. Parameters.parameter:reportNames.part:table6B-Line13.part:table6B-Line13-den.id
                                                                          Definition

                                                                          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                                                          ShortUnique id for inter-element referencing
                                                                          Control0..1
                                                                          Typestring
                                                                          Is Modifierfalse
                                                                          XML FormatIn the XML format, this property is represented as an attribute.
                                                                          Summaryfalse
                                                                          474. Parameters.parameter:reportNames.part:table6B-Line13.part:table6B-Line13-den.extension
                                                                          Definition

                                                                          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                                                          ShortAdditional content defined by implementations
                                                                          Comments

                                                                          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                          Control0..*
                                                                          TypeExtension
                                                                          Is Modifierfalse
                                                                          Summaryfalse
                                                                          Alternate Namesextensions, user content
                                                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                          476. Parameters.parameter:reportNames.part:table6B-Line13.part:table6B-Line13-den.modifierExtension
                                                                          Definition

                                                                          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                                                          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                                                          ShortExtensions that cannot be ignored even if unrecognized
                                                                          Comments

                                                                          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                          Control0..*
                                                                          TypeExtension
                                                                          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                                                          Summarytrue
                                                                          Requirements

                                                                          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                                                          Alternate Namesextensions, user content, modifiers
                                                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                          478. Parameters.parameter:reportNames.part:table6B-Line13.part:table6B-Line13-den.name
                                                                          Definition

                                                                          The name of the parameter (reference to the operation definition).

                                                                          ShortName from the definition
                                                                          Control1..1
                                                                          Typestring
                                                                          Is Modifierfalse
                                                                          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                          Must Supporttrue
                                                                          Summarytrue
                                                                          Fixed Valuetable6B-Line13-Preventive-Care-And-Screening-BMI-CMS69-den
                                                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                          480. Parameters.parameter:reportNames.part:table6B-Line13.part:table6B-Line13-den.value[x]
                                                                          Definition

                                                                          If the parameter is a data type.

                                                                          ShortIf parameter is a data type
                                                                          Control1..1
                                                                          This element is affected by the following invariants: inv-1
                                                                          Typeboolean
                                                                          [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                                                          Is Modifierfalse
                                                                          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                          Must Supporttrue
                                                                          Summarytrue
                                                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                          482. Parameters.parameter:reportNames.part:table6B-Line13.part:table6B-Line13-den.resource
                                                                          Definition

                                                                          If the parameter is a whole resource.

                                                                          ShortIf parameter is a whole resource
                                                                          Comments

                                                                          When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods.

                                                                          Control0..1
                                                                          This element is affected by the following invariants: inv-1
                                                                          TypeResource
                                                                          Is Modifierfalse
                                                                          Summarytrue
                                                                          484. Parameters.parameter:reportNames.part:table6B-Line13.part:table6B-Line13-den.part
                                                                          Definition

                                                                          A named part of a multi-part parameter.

                                                                          ShortNamed part of a multi-part parameter
                                                                          Comments

                                                                          Only one level of nested parameters is allowed.

                                                                          Control0..*
                                                                          TypeSeettp://hl7.org/fhir/StructureDefinition/Parameters#Parameters.parameter
                                                                          Is Modifierfalse
                                                                          Summarytrue
                                                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                          486. Parameters.parameter:reportNames.part:table6B-Line13.part:table6B-Line13-denexcl
                                                                          Slice Nametable6B-Line13-denexcl
                                                                          Definition

                                                                          A named part of a multi-part parameter.

                                                                          ShortNamed part of a multi-part parameter
                                                                          Comments

                                                                          Only one level of nested parameters is allowed.

                                                                          Control0..1
                                                                          TypeBackboneElement
                                                                          Is Modifierfalse
                                                                          Must Supporttrue
                                                                          Summarytrue
                                                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                          488. Parameters.parameter:reportNames.part:table6B-Line13.part:table6B-Line13-denexcl.id
                                                                          Definition

                                                                          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                                                          ShortUnique id for inter-element referencing
                                                                          Control0..1
                                                                          Typestring
                                                                          Is Modifierfalse
                                                                          XML FormatIn the XML format, this property is represented as an attribute.
                                                                          Summaryfalse
                                                                          490. Parameters.parameter:reportNames.part:table6B-Line13.part:table6B-Line13-denexcl.extension
                                                                          Definition

                                                                          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                                                          ShortAdditional content defined by implementations
                                                                          Comments

                                                                          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                          Control0..*
                                                                          TypeExtension
                                                                          Is Modifierfalse
                                                                          Summaryfalse
                                                                          Alternate Namesextensions, user content
                                                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                          492. Parameters.parameter:reportNames.part:table6B-Line13.part:table6B-Line13-denexcl.modifierExtension
                                                                          Definition

                                                                          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                                                          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                                                          ShortExtensions that cannot be ignored even if unrecognized
                                                                          Comments

                                                                          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                          Control0..*
                                                                          TypeExtension
                                                                          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                                                          Summarytrue
                                                                          Requirements

                                                                          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                                                          Alternate Namesextensions, user content, modifiers
                                                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                          494. Parameters.parameter:reportNames.part:table6B-Line13.part:table6B-Line13-denexcl.name
                                                                          Definition

                                                                          The name of the parameter (reference to the operation definition).

                                                                          ShortName from the definition
                                                                          Control1..1
                                                                          Typestring
                                                                          Is Modifierfalse
                                                                          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                          Must Supporttrue
                                                                          Summarytrue
                                                                          Fixed Valuetable6B-Line13-Preventive-Care-And-Screening-BMI-CMS69-denexcl
                                                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                          496. Parameters.parameter:reportNames.part:table6B-Line13.part:table6B-Line13-denexcl.value[x]
                                                                          Definition

                                                                          If the parameter is a data type.

                                                                          ShortIf parameter is a data type
                                                                          Control1..1
                                                                          This element is affected by the following invariants: inv-1
                                                                          Typeboolean
                                                                          [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                                                          Is Modifierfalse
                                                                          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                          Must Supporttrue
                                                                          Summarytrue
                                                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                          498. Parameters.parameter:reportNames.part:table6B-Line13.part:table6B-Line13-denexcl.resource
                                                                          Definition

                                                                          If the parameter is a whole resource.

                                                                          ShortIf parameter is a whole resource
                                                                          Comments

                                                                          When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods.

                                                                          Control0..1
                                                                          This element is affected by the following invariants: inv-1
                                                                          TypeResource
                                                                          Is Modifierfalse
                                                                          Summarytrue
                                                                          500. Parameters.parameter:reportNames.part:table6B-Line13.part:table6B-Line13-denexcl.part
                                                                          Definition

                                                                          A named part of a multi-part parameter.

                                                                          ShortNamed part of a multi-part parameter
                                                                          Comments

                                                                          Only one level of nested parameters is allowed.

                                                                          Control0..*
                                                                          TypeSeettp://hl7.org/fhir/StructureDefinition/Parameters#Parameters.parameter
                                                                          Is Modifierfalse
                                                                          Summarytrue
                                                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                          502. Parameters.parameter:reportNames.part:table6B-Line13.part:table6B-Line13-denexp
                                                                          Slice Nametable6B-Line13-denexp
                                                                          Definition

                                                                          A named part of a multi-part parameter.

                                                                          ShortNamed part of a multi-part parameter
                                                                          Comments

                                                                          Only one level of nested parameters is allowed.

                                                                          Control0..1
                                                                          TypeBackboneElement
                                                                          Is Modifierfalse
                                                                          Must Supporttrue
                                                                          Summarytrue
                                                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                          504. Parameters.parameter:reportNames.part:table6B-Line13.part:table6B-Line13-denexp.id
                                                                          Definition

                                                                          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                                                          ShortUnique id for inter-element referencing
                                                                          Control0..1
                                                                          Typestring
                                                                          Is Modifierfalse
                                                                          XML FormatIn the XML format, this property is represented as an attribute.
                                                                          Summaryfalse
                                                                          506. Parameters.parameter:reportNames.part:table6B-Line13.part:table6B-Line13-denexp.extension
                                                                          Definition

                                                                          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                                                          ShortAdditional content defined by implementations
                                                                          Comments

                                                                          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                          Control0..*
                                                                          TypeExtension
                                                                          Is Modifierfalse
                                                                          Summaryfalse
                                                                          Alternate Namesextensions, user content
                                                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                          508. Parameters.parameter:reportNames.part:table6B-Line13.part:table6B-Line13-denexp.modifierExtension
                                                                          Definition

                                                                          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                                                          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                                                          ShortExtensions that cannot be ignored even if unrecognized
                                                                          Comments

                                                                          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                          Control0..*
                                                                          TypeExtension
                                                                          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                                                          Summarytrue
                                                                          Requirements

                                                                          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                                                          Alternate Namesextensions, user content, modifiers
                                                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                          510. Parameters.parameter:reportNames.part:table6B-Line13.part:table6B-Line13-denexp.name
                                                                          Definition

                                                                          The name of the parameter (reference to the operation definition).

                                                                          ShortName from the definition
                                                                          Control1..1
                                                                          Typestring
                                                                          Is Modifierfalse
                                                                          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                          Must Supporttrue
                                                                          Summarytrue
                                                                          Fixed Valuetable6B-Line13-Preventive-Care-And-Screening-BMI-CMS69-denexp
                                                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                          512. Parameters.parameter:reportNames.part:table6B-Line13.part:table6B-Line13-denexp.value[x]
                                                                          Definition

                                                                          If the parameter is a data type.

                                                                          ShortIf parameter is a data type
                                                                          Control1..1
                                                                          This element is affected by the following invariants: inv-1
                                                                          Typeboolean
                                                                          [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                                                          Is Modifierfalse
                                                                          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                          Must Supporttrue
                                                                          Summarytrue
                                                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                          514. Parameters.parameter:reportNames.part:table6B-Line13.part:table6B-Line13-denexp.resource
                                                                          Definition

                                                                          If the parameter is a whole resource.

                                                                          ShortIf parameter is a whole resource
                                                                          Comments

                                                                          When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods.

                                                                          Control0..1
                                                                          This element is affected by the following invariants: inv-1
                                                                          TypeResource
                                                                          Is Modifierfalse
                                                                          Summarytrue
                                                                          516. Parameters.parameter:reportNames.part:table6B-Line13.part:table6B-Line13-denexp.part
                                                                          Definition

                                                                          A named part of a multi-part parameter.

                                                                          ShortNamed part of a multi-part parameter
                                                                          Comments

                                                                          Only one level of nested parameters is allowed.

                                                                          Control0..*
                                                                          TypeSeettp://hl7.org/fhir/StructureDefinition/Parameters#Parameters.parameter
                                                                          Is Modifierfalse
                                                                          Summarytrue
                                                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                          518. Parameters.parameter:reportNames.part:table6B-Line13.part:table6B-Line13-num
                                                                          Slice Nametable6B-Line13-num
                                                                          Definition

                                                                          A named part of a multi-part parameter.

                                                                          ShortNamed part of a multi-part parameter
                                                                          Comments

                                                                          Only one level of nested parameters is allowed.

                                                                          Control0..1
                                                                          TypeBackboneElement
                                                                          Is Modifierfalse
                                                                          Must Supporttrue
                                                                          Summarytrue
                                                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                          520. Parameters.parameter:reportNames.part:table6B-Line13.part:table6B-Line13-num.id
                                                                          Definition

                                                                          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                                                          ShortUnique id for inter-element referencing
                                                                          Control0..1
                                                                          Typestring
                                                                          Is Modifierfalse
                                                                          XML FormatIn the XML format, this property is represented as an attribute.
                                                                          Summaryfalse
                                                                          522. Parameters.parameter:reportNames.part:table6B-Line13.part:table6B-Line13-num.extension
                                                                          Definition

                                                                          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                                                          ShortAdditional content defined by implementations
                                                                          Comments

                                                                          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                          Control0..*
                                                                          TypeExtension
                                                                          Is Modifierfalse
                                                                          Summaryfalse
                                                                          Alternate Namesextensions, user content
                                                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                          524. Parameters.parameter:reportNames.part:table6B-Line13.part:table6B-Line13-num.modifierExtension
                                                                          Definition

                                                                          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                                                          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                                                          ShortExtensions that cannot be ignored even if unrecognized
                                                                          Comments

                                                                          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                          Control0..*
                                                                          TypeExtension
                                                                          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                                                          Summarytrue
                                                                          Requirements

                                                                          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                                                          Alternate Namesextensions, user content, modifiers
                                                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                          526. Parameters.parameter:reportNames.part:table6B-Line13.part:table6B-Line13-num.name
                                                                          Definition

                                                                          The name of the parameter (reference to the operation definition).

                                                                          ShortName from the definition
                                                                          Control1..1
                                                                          Typestring
                                                                          Is Modifierfalse
                                                                          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                          Must Supporttrue
                                                                          Summarytrue
                                                                          Fixed Valuetable6B-Line13-Preventive-Care-And-Screening-BMI-CMS69-num
                                                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                          528. Parameters.parameter:reportNames.part:table6B-Line13.part:table6B-Line13-num.value[x]
                                                                          Definition

                                                                          If the parameter is a data type.

                                                                          ShortIf parameter is a data type
                                                                          Control1..1
                                                                          This element is affected by the following invariants: inv-1
                                                                          Typeboolean
                                                                          [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                                                          Is Modifierfalse
                                                                          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                          Must Supporttrue
                                                                          Summarytrue
                                                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                          530. Parameters.parameter:reportNames.part:table6B-Line13.part:table6B-Line13-num.resource
                                                                          Definition

                                                                          If the parameter is a whole resource.

                                                                          ShortIf parameter is a whole resource
                                                                          Comments

                                                                          When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods.

                                                                          Control0..1
                                                                          This element is affected by the following invariants: inv-1
                                                                          TypeResource
                                                                          Is Modifierfalse
                                                                          Summarytrue
                                                                          532. Parameters.parameter:reportNames.part:table6B-Line13.part:table6B-Line13-num.part
                                                                          Definition

                                                                          A named part of a multi-part parameter.

                                                                          ShortNamed part of a multi-part parameter
                                                                          Comments

                                                                          Only one level of nested parameters is allowed.

                                                                          Control0..*
                                                                          TypeSeettp://hl7.org/fhir/StructureDefinition/Parameters#Parameters.parameter
                                                                          Is Modifierfalse
                                                                          Summarytrue
                                                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                          534. Parameters.parameter:reportNames.part:table6B-Line14a
                                                                          Slice Nametable6B-Line14a
                                                                          Definition

                                                                          A named part of a multi-part parameter.

                                                                          ShortNamed part of a multi-part parameter
                                                                          Comments

                                                                          Only one level of nested parameters is allowed.

                                                                          Control1..1
                                                                          TypeBackboneElement
                                                                          Is Modifierfalse
                                                                          Must Supporttrue
                                                                          Summarytrue
                                                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                          536. Parameters.parameter:reportNames.part:table6B-Line14a.id
                                                                          Definition

                                                                          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                                                          ShortUnique id for inter-element referencing
                                                                          Control0..1
                                                                          Typestring
                                                                          Is Modifierfalse
                                                                          XML FormatIn the XML format, this property is represented as an attribute.
                                                                          Summaryfalse
                                                                          538. Parameters.parameter:reportNames.part:table6B-Line14a.extension
                                                                          Definition

                                                                          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                                                          ShortAdditional content defined by implementations
                                                                          Comments

                                                                          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                          Control0..*
                                                                          TypeExtension
                                                                          Is Modifierfalse
                                                                          Summaryfalse
                                                                          Alternate Namesextensions, user content
                                                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                          540. Parameters.parameter:reportNames.part:table6B-Line14a.modifierExtension
                                                                          Definition

                                                                          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                                                          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                                                          ShortExtensions that cannot be ignored even if unrecognized
                                                                          Comments

                                                                          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                          Control0..*
                                                                          TypeExtension
                                                                          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                                                          Summarytrue
                                                                          Requirements

                                                                          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                                                          Alternate Namesextensions, user content, modifiers
                                                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                          542. Parameters.parameter:reportNames.part:table6B-Line14a.name
                                                                          Definition

                                                                          The name of the parameter (reference to the operation definition).

                                                                          ShortName from the definition
                                                                          Control1..1
                                                                          Typestring
                                                                          Is Modifierfalse
                                                                          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                          Must Supporttrue
                                                                          Summarytrue
                                                                          Fixed Valuetable6B-Line14a-Preventive-Care-And-Screening-Tobacco-Use-CMS138
                                                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                          544. Parameters.parameter:reportNames.part:table6B-Line14a.value[x]
                                                                          Definition

                                                                          If the parameter is a data type.

                                                                          ShortIf parameter is a data type
                                                                          Control1..1
                                                                          This element is affected by the following invariants: inv-1
                                                                          Typeboolean
                                                                          [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                                                          Is Modifierfalse
                                                                          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                          Must Supporttrue
                                                                          Summarytrue
                                                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                          546. Parameters.parameter:reportNames.part:table6B-Line14a.resource
                                                                          Definition

                                                                          If the parameter is a whole resource.

                                                                          ShortIf parameter is a whole resource
                                                                          Comments

                                                                          When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods.

                                                                          Control0..1
                                                                          This element is affected by the following invariants: inv-1
                                                                          TypeResource
                                                                          Is Modifierfalse
                                                                          Summarytrue
                                                                          548. Parameters.parameter:reportNames.part:table6B-Line14a.part
                                                                          Definition

                                                                          A named part of a multi-part parameter.

                                                                          ShortNamed part of a multi-part parameter
                                                                          Comments

                                                                          Only one level of nested parameters is allowed.

                                                                          Control0..*
                                                                          TypeSeettp://hl7.org/fhir/StructureDefinition/Parameters#Parameters.parameter
                                                                          Is Modifierfalse
                                                                          Must Supporttrue
                                                                          Summarytrue
                                                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                          SlicingThis element introduces a set of slices on Parameters.parameter.part.part. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                                                                          • value @ $this.name
                                                                          • 550. Parameters.parameter:reportNames.part:table6B-Line14a.part:table6B-Line14a-den
                                                                            Slice Nametable6B-Line14a-den
                                                                            Definition

                                                                            A named part of a multi-part parameter.

                                                                            ShortNamed part of a multi-part parameter
                                                                            Comments

                                                                            Only one level of nested parameters is allowed.

                                                                            Control0..1
                                                                            TypeBackboneElement
                                                                            Is Modifierfalse
                                                                            Must Supporttrue
                                                                            Summarytrue
                                                                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                            552. Parameters.parameter:reportNames.part:table6B-Line14a.part:table6B-Line14a-den.id
                                                                            Definition

                                                                            Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                                                            ShortUnique id for inter-element referencing
                                                                            Control0..1
                                                                            Typestring
                                                                            Is Modifierfalse
                                                                            XML FormatIn the XML format, this property is represented as an attribute.
                                                                            Summaryfalse
                                                                            554. Parameters.parameter:reportNames.part:table6B-Line14a.part:table6B-Line14a-den.extension
                                                                            Definition

                                                                            May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                                                            ShortAdditional content defined by implementations
                                                                            Comments

                                                                            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                            Control0..*
                                                                            TypeExtension
                                                                            Is Modifierfalse
                                                                            Summaryfalse
                                                                            Alternate Namesextensions, user content
                                                                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                            556. Parameters.parameter:reportNames.part:table6B-Line14a.part:table6B-Line14a-den.modifierExtension
                                                                            Definition

                                                                            May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                                                            Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                                                            ShortExtensions that cannot be ignored even if unrecognized
                                                                            Comments

                                                                            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                            Control0..*
                                                                            TypeExtension
                                                                            Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                                                            Summarytrue
                                                                            Requirements

                                                                            Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                                                            Alternate Namesextensions, user content, modifiers
                                                                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                            558. Parameters.parameter:reportNames.part:table6B-Line14a.part:table6B-Line14a-den.name
                                                                            Definition

                                                                            The name of the parameter (reference to the operation definition).

                                                                            ShortName from the definition
                                                                            Control1..1
                                                                            Typestring
                                                                            Is Modifierfalse
                                                                            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                            Must Supporttrue
                                                                            Summarytrue
                                                                            Fixed Valuetable6B-Line14a-Preventive-Care-And-Screening-Tobacco-Use-CMS138-den
                                                                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                            560. Parameters.parameter:reportNames.part:table6B-Line14a.part:table6B-Line14a-den.value[x]
                                                                            Definition

                                                                            If the parameter is a data type.

                                                                            ShortIf parameter is a data type
                                                                            Control1..1
                                                                            This element is affected by the following invariants: inv-1
                                                                            Typeboolean
                                                                            [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                                                            Is Modifierfalse
                                                                            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                            Must Supporttrue
                                                                            Summarytrue
                                                                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                            562. Parameters.parameter:reportNames.part:table6B-Line14a.part:table6B-Line14a-den.resource
                                                                            Definition

                                                                            If the parameter is a whole resource.

                                                                            ShortIf parameter is a whole resource
                                                                            Comments

                                                                            When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods.

                                                                            Control0..1
                                                                            This element is affected by the following invariants: inv-1
                                                                            TypeResource
                                                                            Is Modifierfalse
                                                                            Summarytrue
                                                                            564. Parameters.parameter:reportNames.part:table6B-Line14a.part:table6B-Line14a-den.part
                                                                            Definition

                                                                            A named part of a multi-part parameter.

                                                                            ShortNamed part of a multi-part parameter
                                                                            Comments

                                                                            Only one level of nested parameters is allowed.

                                                                            Control0..*
                                                                            TypeSeettp://hl7.org/fhir/StructureDefinition/Parameters#Parameters.parameter
                                                                            Is Modifierfalse
                                                                            Summarytrue
                                                                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                            566. Parameters.parameter:reportNames.part:table6B-Line14a.part:table6B-Line14a-denexcl
                                                                            Slice Nametable6B-Line14a-denexcl
                                                                            Definition

                                                                            A named part of a multi-part parameter.

                                                                            ShortNamed part of a multi-part parameter
                                                                            Comments

                                                                            Only one level of nested parameters is allowed.

                                                                            Control0..1
                                                                            TypeBackboneElement
                                                                            Is Modifierfalse
                                                                            Must Supporttrue
                                                                            Summarytrue
                                                                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                            568. Parameters.parameter:reportNames.part:table6B-Line14a.part:table6B-Line14a-denexcl.id
                                                                            Definition

                                                                            Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                                                            ShortUnique id for inter-element referencing
                                                                            Control0..1
                                                                            Typestring
                                                                            Is Modifierfalse
                                                                            XML FormatIn the XML format, this property is represented as an attribute.
                                                                            Summaryfalse
                                                                            570. Parameters.parameter:reportNames.part:table6B-Line14a.part:table6B-Line14a-denexcl.extension
                                                                            Definition

                                                                            May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                                                            ShortAdditional content defined by implementations
                                                                            Comments

                                                                            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                            Control0..*
                                                                            TypeExtension
                                                                            Is Modifierfalse
                                                                            Summaryfalse
                                                                            Alternate Namesextensions, user content
                                                                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                            572. Parameters.parameter:reportNames.part:table6B-Line14a.part:table6B-Line14a-denexcl.modifierExtension
                                                                            Definition

                                                                            May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                                                            Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                                                            ShortExtensions that cannot be ignored even if unrecognized
                                                                            Comments

                                                                            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                            Control0..*
                                                                            TypeExtension
                                                                            Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                                                            Summarytrue
                                                                            Requirements

                                                                            Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                                                            Alternate Namesextensions, user content, modifiers
                                                                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                            574. Parameters.parameter:reportNames.part:table6B-Line14a.part:table6B-Line14a-denexcl.name
                                                                            Definition

                                                                            The name of the parameter (reference to the operation definition).

                                                                            ShortName from the definition
                                                                            Control1..1
                                                                            Typestring
                                                                            Is Modifierfalse
                                                                            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                            Must Supporttrue
                                                                            Summarytrue
                                                                            Fixed Valuetable6B-Line14a-Preventive-Care-And-Screening-Tobacco-Use-CMS138-denexcl
                                                                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                            576. Parameters.parameter:reportNames.part:table6B-Line14a.part:table6B-Line14a-denexcl.value[x]
                                                                            Definition

                                                                            If the parameter is a data type.

                                                                            ShortIf parameter is a data type
                                                                            Control1..1
                                                                            This element is affected by the following invariants: inv-1
                                                                            Typeboolean
                                                                            [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                                                            Is Modifierfalse
                                                                            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                            Must Supporttrue
                                                                            Summarytrue
                                                                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                            578. Parameters.parameter:reportNames.part:table6B-Line14a.part:table6B-Line14a-denexcl.resource
                                                                            Definition

                                                                            If the parameter is a whole resource.

                                                                            ShortIf parameter is a whole resource
                                                                            Comments

                                                                            When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods.

                                                                            Control0..1
                                                                            This element is affected by the following invariants: inv-1
                                                                            TypeResource
                                                                            Is Modifierfalse
                                                                            Summarytrue
                                                                            580. Parameters.parameter:reportNames.part:table6B-Line14a.part:table6B-Line14a-denexcl.part
                                                                            Definition

                                                                            A named part of a multi-part parameter.

                                                                            ShortNamed part of a multi-part parameter
                                                                            Comments

                                                                            Only one level of nested parameters is allowed.

                                                                            Control0..*
                                                                            TypeSeettp://hl7.org/fhir/StructureDefinition/Parameters#Parameters.parameter
                                                                            Is Modifierfalse
                                                                            Summarytrue
                                                                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                            582. Parameters.parameter:reportNames.part:table6B-Line14a.part:table6B-Line14a-num
                                                                            Slice Nametable6B-Line14a-num
                                                                            Definition

                                                                            A named part of a multi-part parameter.

                                                                            ShortNamed part of a multi-part parameter
                                                                            Comments

                                                                            Only one level of nested parameters is allowed.

                                                                            Control0..1
                                                                            TypeBackboneElement
                                                                            Is Modifierfalse
                                                                            Must Supporttrue
                                                                            Summarytrue
                                                                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                            584. Parameters.parameter:reportNames.part:table6B-Line14a.part:table6B-Line14a-num.id
                                                                            Definition

                                                                            Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                                                            ShortUnique id for inter-element referencing
                                                                            Control0..1
                                                                            Typestring
                                                                            Is Modifierfalse
                                                                            XML FormatIn the XML format, this property is represented as an attribute.
                                                                            Summaryfalse
                                                                            586. Parameters.parameter:reportNames.part:table6B-Line14a.part:table6B-Line14a-num.extension
                                                                            Definition

                                                                            May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                                                            ShortAdditional content defined by implementations
                                                                            Comments

                                                                            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                            Control0..*
                                                                            TypeExtension
                                                                            Is Modifierfalse
                                                                            Summaryfalse
                                                                            Alternate Namesextensions, user content
                                                                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                            588. Parameters.parameter:reportNames.part:table6B-Line14a.part:table6B-Line14a-num.modifierExtension
                                                                            Definition

                                                                            May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                                                            Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                                                            ShortExtensions that cannot be ignored even if unrecognized
                                                                            Comments

                                                                            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                            Control0..*
                                                                            TypeExtension
                                                                            Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                                                            Summarytrue
                                                                            Requirements

                                                                            Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                                                            Alternate Namesextensions, user content, modifiers
                                                                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                            590. Parameters.parameter:reportNames.part:table6B-Line14a.part:table6B-Line14a-num.name
                                                                            Definition

                                                                            The name of the parameter (reference to the operation definition).

                                                                            ShortName from the definition
                                                                            Control1..1
                                                                            Typestring
                                                                            Is Modifierfalse
                                                                            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                            Must Supporttrue
                                                                            Summarytrue
                                                                            Fixed Valuetable6B-Line14a-Preventive-Care-And-Screening-Tobacco-Use-CMS138-num
                                                                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                            592. Parameters.parameter:reportNames.part:table6B-Line14a.part:table6B-Line14a-num.value[x]
                                                                            Definition

                                                                            If the parameter is a data type.

                                                                            ShortIf parameter is a data type
                                                                            Control1..1
                                                                            This element is affected by the following invariants: inv-1
                                                                            Typeboolean
                                                                            [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                                                            Is Modifierfalse
                                                                            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                            Must Supporttrue
                                                                            Summarytrue
                                                                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                            594. Parameters.parameter:reportNames.part:table6B-Line14a.part:table6B-Line14a-num.resource
                                                                            Definition

                                                                            If the parameter is a whole resource.

                                                                            ShortIf parameter is a whole resource
                                                                            Comments

                                                                            When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods.

                                                                            Control0..1
                                                                            This element is affected by the following invariants: inv-1
                                                                            TypeResource
                                                                            Is Modifierfalse
                                                                            Summarytrue
                                                                            596. Parameters.parameter:reportNames.part:table6B-Line14a.part:table6B-Line14a-num.part
                                                                            Definition

                                                                            A named part of a multi-part parameter.

                                                                            ShortNamed part of a multi-part parameter
                                                                            Comments

                                                                            Only one level of nested parameters is allowed.

                                                                            Control0..*
                                                                            TypeSeettp://hl7.org/fhir/StructureDefinition/Parameters#Parameters.parameter
                                                                            Is Modifierfalse
                                                                            Summarytrue
                                                                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                            598. Parameters.parameter:reportNames.part:table6B-Line17a
                                                                            Slice Nametable6B-Line17a
                                                                            Definition

                                                                            A named part of a multi-part parameter.

                                                                            ShortNamed part of a multi-part parameter
                                                                            Comments

                                                                            Only one level of nested parameters is allowed.

                                                                            Control1..1
                                                                            TypeBackboneElement
                                                                            Is Modifierfalse
                                                                            Must Supporttrue
                                                                            Summarytrue
                                                                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                            600. Parameters.parameter:reportNames.part:table6B-Line17a.id
                                                                            Definition

                                                                            Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                                                            ShortUnique id for inter-element referencing
                                                                            Control0..1
                                                                            Typestring
                                                                            Is Modifierfalse
                                                                            XML FormatIn the XML format, this property is represented as an attribute.
                                                                            Summaryfalse
                                                                            602. Parameters.parameter:reportNames.part:table6B-Line17a.extension
                                                                            Definition

                                                                            May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                                                            ShortAdditional content defined by implementations
                                                                            Comments

                                                                            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                            Control0..*
                                                                            TypeExtension
                                                                            Is Modifierfalse
                                                                            Summaryfalse
                                                                            Alternate Namesextensions, user content
                                                                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                            604. Parameters.parameter:reportNames.part:table6B-Line17a.modifierExtension
                                                                            Definition

                                                                            May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                                                            Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                                                            ShortExtensions that cannot be ignored even if unrecognized
                                                                            Comments

                                                                            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                            Control0..*
                                                                            TypeExtension
                                                                            Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                                                            Summarytrue
                                                                            Requirements

                                                                            Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                                                            Alternate Namesextensions, user content, modifiers
                                                                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                            606. Parameters.parameter:reportNames.part:table6B-Line17a.name
                                                                            Definition

                                                                            The name of the parameter (reference to the operation definition).

                                                                            ShortName from the definition
                                                                            Control1..1
                                                                            Typestring
                                                                            Is Modifierfalse
                                                                            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                            Must Supporttrue
                                                                            Summarytrue
                                                                            Fixed Valuetable6B-Line17a-Statin-Therapy-CMS347
                                                                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                            608. Parameters.parameter:reportNames.part:table6B-Line17a.value[x]
                                                                            Definition

                                                                            If the parameter is a data type.

                                                                            ShortIf parameter is a data type
                                                                            Control1..1
                                                                            This element is affected by the following invariants: inv-1
                                                                            Typeboolean
                                                                            [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                                                            Is Modifierfalse
                                                                            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                            Must Supporttrue
                                                                            Summarytrue
                                                                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                            610. Parameters.parameter:reportNames.part:table6B-Line17a.resource
                                                                            Definition

                                                                            If the parameter is a whole resource.

                                                                            ShortIf parameter is a whole resource
                                                                            Comments

                                                                            When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods.

                                                                            Control0..1
                                                                            This element is affected by the following invariants: inv-1
                                                                            TypeResource
                                                                            Is Modifierfalse
                                                                            Summarytrue
                                                                            612. Parameters.parameter:reportNames.part:table6B-Line17a.part
                                                                            Definition

                                                                            A named part of a multi-part parameter.

                                                                            ShortNamed part of a multi-part parameter
                                                                            Comments

                                                                            Only one level of nested parameters is allowed.

                                                                            Control0..*
                                                                            TypeSeettp://hl7.org/fhir/StructureDefinition/Parameters#Parameters.parameter
                                                                            Is Modifierfalse
                                                                            Must Supporttrue
                                                                            Summarytrue
                                                                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                            SlicingThis element introduces a set of slices on Parameters.parameter.part.part. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                                                                            • value @ $this.name
                                                                            • 614. Parameters.parameter:reportNames.part:table6B-Line17a.part:table6B-Line17a-den
                                                                              Slice Nametable6B-Line17a-den
                                                                              Definition

                                                                              A named part of a multi-part parameter.

                                                                              ShortNamed part of a multi-part parameter
                                                                              Comments

                                                                              Only one level of nested parameters is allowed.

                                                                              Control0..1
                                                                              TypeBackboneElement
                                                                              Is Modifierfalse
                                                                              Must Supporttrue
                                                                              Summarytrue
                                                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                              616. Parameters.parameter:reportNames.part:table6B-Line17a.part:table6B-Line17a-den.id
                                                                              Definition

                                                                              Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                                                              ShortUnique id for inter-element referencing
                                                                              Control0..1
                                                                              Typestring
                                                                              Is Modifierfalse
                                                                              XML FormatIn the XML format, this property is represented as an attribute.
                                                                              Summaryfalse
                                                                              618. Parameters.parameter:reportNames.part:table6B-Line17a.part:table6B-Line17a-den.extension
                                                                              Definition

                                                                              May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                                                              ShortAdditional content defined by implementations
                                                                              Comments

                                                                              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                              Control0..*
                                                                              TypeExtension
                                                                              Is Modifierfalse
                                                                              Summaryfalse
                                                                              Alternate Namesextensions, user content
                                                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                              620. Parameters.parameter:reportNames.part:table6B-Line17a.part:table6B-Line17a-den.modifierExtension
                                                                              Definition

                                                                              May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                                                              Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                                                              ShortExtensions that cannot be ignored even if unrecognized
                                                                              Comments

                                                                              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                              Control0..*
                                                                              TypeExtension
                                                                              Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                                                              Summarytrue
                                                                              Requirements

                                                                              Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                                                              Alternate Namesextensions, user content, modifiers
                                                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                              622. Parameters.parameter:reportNames.part:table6B-Line17a.part:table6B-Line17a-den.name
                                                                              Definition

                                                                              The name of the parameter (reference to the operation definition).

                                                                              ShortName from the definition
                                                                              Control1..1
                                                                              Typestring
                                                                              Is Modifierfalse
                                                                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                              Must Supporttrue
                                                                              Summarytrue
                                                                              Fixed Valuetable6B-Line17a-Statin-Therapy-CMS347-den
                                                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                              624. Parameters.parameter:reportNames.part:table6B-Line17a.part:table6B-Line17a-den.value[x]
                                                                              Definition

                                                                              If the parameter is a data type.

                                                                              ShortIf parameter is a data type
                                                                              Control1..1
                                                                              This element is affected by the following invariants: inv-1
                                                                              Typeboolean
                                                                              [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                                                              Is Modifierfalse
                                                                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                              Must Supporttrue
                                                                              Summarytrue
                                                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                              626. Parameters.parameter:reportNames.part:table6B-Line17a.part:table6B-Line17a-den.resource
                                                                              Definition

                                                                              If the parameter is a whole resource.

                                                                              ShortIf parameter is a whole resource
                                                                              Comments

                                                                              When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods.

                                                                              Control0..1
                                                                              This element is affected by the following invariants: inv-1
                                                                              TypeResource
                                                                              Is Modifierfalse
                                                                              Summarytrue
                                                                              628. Parameters.parameter:reportNames.part:table6B-Line17a.part:table6B-Line17a-den.part
                                                                              Definition

                                                                              A named part of a multi-part parameter.

                                                                              ShortNamed part of a multi-part parameter
                                                                              Comments

                                                                              Only one level of nested parameters is allowed.

                                                                              Control0..*
                                                                              TypeSeettp://hl7.org/fhir/StructureDefinition/Parameters#Parameters.parameter
                                                                              Is Modifierfalse
                                                                              Summarytrue
                                                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                              630. Parameters.parameter:reportNames.part:table6B-Line17a.part:table6B-Line17a-denexcl
                                                                              Slice Nametable6B-Line17a-denexcl
                                                                              Definition

                                                                              A named part of a multi-part parameter.

                                                                              ShortNamed part of a multi-part parameter
                                                                              Comments

                                                                              Only one level of nested parameters is allowed.

                                                                              Control0..1
                                                                              TypeBackboneElement
                                                                              Is Modifierfalse
                                                                              Must Supporttrue
                                                                              Summarytrue
                                                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                              632. Parameters.parameter:reportNames.part:table6B-Line17a.part:table6B-Line17a-denexcl.id
                                                                              Definition

                                                                              Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                                                              ShortUnique id for inter-element referencing
                                                                              Control0..1
                                                                              Typestring
                                                                              Is Modifierfalse
                                                                              XML FormatIn the XML format, this property is represented as an attribute.
                                                                              Summaryfalse
                                                                              634. Parameters.parameter:reportNames.part:table6B-Line17a.part:table6B-Line17a-denexcl.extension
                                                                              Definition

                                                                              May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                                                              ShortAdditional content defined by implementations
                                                                              Comments

                                                                              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                              Control0..*
                                                                              TypeExtension
                                                                              Is Modifierfalse
                                                                              Summaryfalse
                                                                              Alternate Namesextensions, user content
                                                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                              636. Parameters.parameter:reportNames.part:table6B-Line17a.part:table6B-Line17a-denexcl.modifierExtension
                                                                              Definition

                                                                              May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                                                              Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                                                              ShortExtensions that cannot be ignored even if unrecognized
                                                                              Comments

                                                                              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                              Control0..*
                                                                              TypeExtension
                                                                              Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                                                              Summarytrue
                                                                              Requirements

                                                                              Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                                                              Alternate Namesextensions, user content, modifiers
                                                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                              638. Parameters.parameter:reportNames.part:table6B-Line17a.part:table6B-Line17a-denexcl.name
                                                                              Definition

                                                                              The name of the parameter (reference to the operation definition).

                                                                              ShortName from the definition
                                                                              Control1..1
                                                                              Typestring
                                                                              Is Modifierfalse
                                                                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                              Must Supporttrue
                                                                              Summarytrue
                                                                              Fixed Valuetable6B-Line17a-Statin-Therapy-CMS347-denexcl
                                                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                              640. Parameters.parameter:reportNames.part:table6B-Line17a.part:table6B-Line17a-denexcl.value[x]
                                                                              Definition

                                                                              If the parameter is a data type.

                                                                              ShortIf parameter is a data type
                                                                              Control1..1
                                                                              This element is affected by the following invariants: inv-1
                                                                              Typeboolean
                                                                              [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                                                              Is Modifierfalse
                                                                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                              Must Supporttrue
                                                                              Summarytrue
                                                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                              642. Parameters.parameter:reportNames.part:table6B-Line17a.part:table6B-Line17a-denexcl.resource
                                                                              Definition

                                                                              If the parameter is a whole resource.

                                                                              ShortIf parameter is a whole resource
                                                                              Comments

                                                                              When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods.

                                                                              Control0..1
                                                                              This element is affected by the following invariants: inv-1
                                                                              TypeResource
                                                                              Is Modifierfalse
                                                                              Summarytrue
                                                                              644. Parameters.parameter:reportNames.part:table6B-Line17a.part:table6B-Line17a-denexcl.part
                                                                              Definition

                                                                              A named part of a multi-part parameter.

                                                                              ShortNamed part of a multi-part parameter
                                                                              Comments

                                                                              Only one level of nested parameters is allowed.

                                                                              Control0..*
                                                                              TypeSeettp://hl7.org/fhir/StructureDefinition/Parameters#Parameters.parameter
                                                                              Is Modifierfalse
                                                                              Summarytrue
                                                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                              646. Parameters.parameter:reportNames.part:table6B-Line17a.part:table6B-Line17a-denexp
                                                                              Slice Nametable6B-Line17a-denexp
                                                                              Definition

                                                                              A named part of a multi-part parameter.

                                                                              ShortNamed part of a multi-part parameter
                                                                              Comments

                                                                              Only one level of nested parameters is allowed.

                                                                              Control0..1
                                                                              TypeBackboneElement
                                                                              Is Modifierfalse
                                                                              Must Supporttrue
                                                                              Summarytrue
                                                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                              648. Parameters.parameter:reportNames.part:table6B-Line17a.part:table6B-Line17a-denexp.id
                                                                              Definition

                                                                              Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                                                              ShortUnique id for inter-element referencing
                                                                              Control0..1
                                                                              Typestring
                                                                              Is Modifierfalse
                                                                              XML FormatIn the XML format, this property is represented as an attribute.
                                                                              Summaryfalse
                                                                              650. Parameters.parameter:reportNames.part:table6B-Line17a.part:table6B-Line17a-denexp.extension
                                                                              Definition

                                                                              May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                                                              ShortAdditional content defined by implementations
                                                                              Comments

                                                                              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                              Control0..*
                                                                              TypeExtension
                                                                              Is Modifierfalse
                                                                              Summaryfalse
                                                                              Alternate Namesextensions, user content
                                                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                              652. Parameters.parameter:reportNames.part:table6B-Line17a.part:table6B-Line17a-denexp.modifierExtension
                                                                              Definition

                                                                              May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                                                              Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                                                              ShortExtensions that cannot be ignored even if unrecognized
                                                                              Comments

                                                                              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                              Control0..*
                                                                              TypeExtension
                                                                              Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                                                              Summarytrue
                                                                              Requirements

                                                                              Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                                                              Alternate Namesextensions, user content, modifiers
                                                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                              654. Parameters.parameter:reportNames.part:table6B-Line17a.part:table6B-Line17a-denexp.name
                                                                              Definition

                                                                              The name of the parameter (reference to the operation definition).

                                                                              ShortName from the definition
                                                                              Control1..1
                                                                              Typestring
                                                                              Is Modifierfalse
                                                                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                              Must Supporttrue
                                                                              Summarytrue
                                                                              Fixed Valuetable6B-Line17a-Statin-Therapy-CMS347-denexp
                                                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                              656. Parameters.parameter:reportNames.part:table6B-Line17a.part:table6B-Line17a-denexp.value[x]
                                                                              Definition

                                                                              If the parameter is a data type.

                                                                              ShortIf parameter is a data type
                                                                              Control1..1
                                                                              This element is affected by the following invariants: inv-1
                                                                              Typeboolean
                                                                              [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                                                              Is Modifierfalse
                                                                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                              Must Supporttrue
                                                                              Summarytrue
                                                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                              658. Parameters.parameter:reportNames.part:table6B-Line17a.part:table6B-Line17a-denexp.resource
                                                                              Definition

                                                                              If the parameter is a whole resource.

                                                                              ShortIf parameter is a whole resource
                                                                              Comments

                                                                              When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods.

                                                                              Control0..1
                                                                              This element is affected by the following invariants: inv-1
                                                                              TypeResource
                                                                              Is Modifierfalse
                                                                              Summarytrue
                                                                              660. Parameters.parameter:reportNames.part:table6B-Line17a.part:table6B-Line17a-denexp.part
                                                                              Definition

                                                                              A named part of a multi-part parameter.

                                                                              ShortNamed part of a multi-part parameter
                                                                              Comments

                                                                              Only one level of nested parameters is allowed.

                                                                              Control0..*
                                                                              TypeSeettp://hl7.org/fhir/StructureDefinition/Parameters#Parameters.parameter
                                                                              Is Modifierfalse
                                                                              Summarytrue
                                                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                              662. Parameters.parameter:reportNames.part:table6B-Line17a.part:table6B-Line17a-num
                                                                              Slice Nametable6B-Line17a-num
                                                                              Definition

                                                                              A named part of a multi-part parameter.

                                                                              ShortNamed part of a multi-part parameter
                                                                              Comments

                                                                              Only one level of nested parameters is allowed.

                                                                              Control0..1
                                                                              TypeBackboneElement
                                                                              Is Modifierfalse
                                                                              Must Supporttrue
                                                                              Summarytrue
                                                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                              664. Parameters.parameter:reportNames.part:table6B-Line17a.part:table6B-Line17a-num.id
                                                                              Definition

                                                                              Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                                                              ShortUnique id for inter-element referencing
                                                                              Control0..1
                                                                              Typestring
                                                                              Is Modifierfalse
                                                                              XML FormatIn the XML format, this property is represented as an attribute.
                                                                              Summaryfalse
                                                                              666. Parameters.parameter:reportNames.part:table6B-Line17a.part:table6B-Line17a-num.extension
                                                                              Definition

                                                                              May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                                                              ShortAdditional content defined by implementations
                                                                              Comments

                                                                              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                              Control0..*
                                                                              TypeExtension
                                                                              Is Modifierfalse
                                                                              Summaryfalse
                                                                              Alternate Namesextensions, user content
                                                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                              668. Parameters.parameter:reportNames.part:table6B-Line17a.part:table6B-Line17a-num.modifierExtension
                                                                              Definition

                                                                              May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                                                              Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                                                              ShortExtensions that cannot be ignored even if unrecognized
                                                                              Comments

                                                                              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                              Control0..*
                                                                              TypeExtension
                                                                              Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                                                              Summarytrue
                                                                              Requirements

                                                                              Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                                                              Alternate Namesextensions, user content, modifiers
                                                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                              670. Parameters.parameter:reportNames.part:table6B-Line17a.part:table6B-Line17a-num.name
                                                                              Definition

                                                                              The name of the parameter (reference to the operation definition).

                                                                              ShortName from the definition
                                                                              Control1..1
                                                                              Typestring
                                                                              Is Modifierfalse
                                                                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                              Must Supporttrue
                                                                              Summarytrue
                                                                              Fixed Valuetable6B-Line17a-Statin-Therapy-CMS347-num
                                                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                              672. Parameters.parameter:reportNames.part:table6B-Line17a.part:table6B-Line17a-num.value[x]
                                                                              Definition

                                                                              If the parameter is a data type.

                                                                              ShortIf parameter is a data type
                                                                              Control1..1
                                                                              This element is affected by the following invariants: inv-1
                                                                              Typeboolean
                                                                              [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                                                              Is Modifierfalse
                                                                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                              Must Supporttrue
                                                                              Summarytrue
                                                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                              674. Parameters.parameter:reportNames.part:table6B-Line17a.part:table6B-Line17a-num.resource
                                                                              Definition

                                                                              If the parameter is a whole resource.

                                                                              ShortIf parameter is a whole resource
                                                                              Comments

                                                                              When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods.

                                                                              Control0..1
                                                                              This element is affected by the following invariants: inv-1
                                                                              TypeResource
                                                                              Is Modifierfalse
                                                                              Summarytrue
                                                                              676. Parameters.parameter:reportNames.part:table6B-Line17a.part:table6B-Line17a-num.part
                                                                              Definition

                                                                              A named part of a multi-part parameter.

                                                                              ShortNamed part of a multi-part parameter
                                                                              Comments

                                                                              Only one level of nested parameters is allowed.

                                                                              Control0..*
                                                                              TypeSeettp://hl7.org/fhir/StructureDefinition/Parameters#Parameters.parameter
                                                                              Is Modifierfalse
                                                                              Summarytrue
                                                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                              678. Parameters.parameter:reportNames.part:table6B-Line18
                                                                              Slice Nametable6B-Line18
                                                                              Definition

                                                                              A named part of a multi-part parameter.

                                                                              ShortNamed part of a multi-part parameter
                                                                              Comments

                                                                              Only one level of nested parameters is allowed.

                                                                              Control1..1
                                                                              TypeBackboneElement
                                                                              Is Modifierfalse
                                                                              Must Supporttrue
                                                                              Summarytrue
                                                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                              680. Parameters.parameter:reportNames.part:table6B-Line18.id
                                                                              Definition

                                                                              Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                                                              ShortUnique id for inter-element referencing
                                                                              Control0..1
                                                                              Typestring
                                                                              Is Modifierfalse
                                                                              XML FormatIn the XML format, this property is represented as an attribute.
                                                                              Summaryfalse
                                                                              682. Parameters.parameter:reportNames.part:table6B-Line18.extension
                                                                              Definition

                                                                              May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                                                              ShortAdditional content defined by implementations
                                                                              Comments

                                                                              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                              Control0..*
                                                                              TypeExtension
                                                                              Is Modifierfalse
                                                                              Summaryfalse
                                                                              Alternate Namesextensions, user content
                                                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                              684. Parameters.parameter:reportNames.part:table6B-Line18.modifierExtension
                                                                              Definition

                                                                              May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                                                              Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                                                              ShortExtensions that cannot be ignored even if unrecognized
                                                                              Comments

                                                                              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                              Control0..*
                                                                              TypeExtension
                                                                              Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                                                              Summarytrue
                                                                              Requirements

                                                                              Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                                                              Alternate Namesextensions, user content, modifiers
                                                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                              686. Parameters.parameter:reportNames.part:table6B-Line18.name
                                                                              Definition

                                                                              The name of the parameter (reference to the operation definition).

                                                                              ShortName from the definition
                                                                              Control1..1
                                                                              Typestring
                                                                              Is Modifierfalse
                                                                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                              Must Supporttrue
                                                                              Summarytrue
                                                                              Fixed Valuetable6B-Line18-Ischmic-Vascular-Disease-CMS164
                                                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                              688. Parameters.parameter:reportNames.part:table6B-Line18.value[x]
                                                                              Definition

                                                                              If the parameter is a data type.

                                                                              ShortIf parameter is a data type
                                                                              Control1..1
                                                                              This element is affected by the following invariants: inv-1
                                                                              Typeboolean
                                                                              [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                                                              Is Modifierfalse
                                                                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                              Must Supporttrue
                                                                              Summarytrue
                                                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                              690. Parameters.parameter:reportNames.part:table6B-Line18.resource
                                                                              Definition

                                                                              If the parameter is a whole resource.

                                                                              ShortIf parameter is a whole resource
                                                                              Comments

                                                                              When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods.

                                                                              Control0..1
                                                                              This element is affected by the following invariants: inv-1
                                                                              TypeResource
                                                                              Is Modifierfalse
                                                                              Summarytrue
                                                                              692. Parameters.parameter:reportNames.part:table6B-Line18.part
                                                                              Definition

                                                                              A named part of a multi-part parameter.

                                                                              ShortNamed part of a multi-part parameter
                                                                              Comments

                                                                              Only one level of nested parameters is allowed.

                                                                              Control0..*
                                                                              TypeSeettp://hl7.org/fhir/StructureDefinition/Parameters#Parameters.parameter
                                                                              Is Modifierfalse
                                                                              Must Supporttrue
                                                                              Summarytrue
                                                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                              SlicingThis element introduces a set of slices on Parameters.parameter.part.part. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                                                                              • value @ $this.name
                                                                              • 694. Parameters.parameter:reportNames.part:table6B-Line18.part:table6B-Line18-den
                                                                                Slice Nametable6B-Line18-den
                                                                                Definition

                                                                                A named part of a multi-part parameter.

                                                                                ShortNamed part of a multi-part parameter
                                                                                Comments

                                                                                Only one level of nested parameters is allowed.

                                                                                Control0..1
                                                                                TypeBackboneElement
                                                                                Is Modifierfalse
                                                                                Must Supporttrue
                                                                                Summarytrue
                                                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                696. Parameters.parameter:reportNames.part:table6B-Line18.part:table6B-Line18-den.id
                                                                                Definition

                                                                                Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                                                                ShortUnique id for inter-element referencing
                                                                                Control0..1
                                                                                Typestring
                                                                                Is Modifierfalse
                                                                                XML FormatIn the XML format, this property is represented as an attribute.
                                                                                Summaryfalse
                                                                                698. Parameters.parameter:reportNames.part:table6B-Line18.part:table6B-Line18-den.extension
                                                                                Definition

                                                                                May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                                                                ShortAdditional content defined by implementations
                                                                                Comments

                                                                                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                                Control0..*
                                                                                TypeExtension
                                                                                Is Modifierfalse
                                                                                Summaryfalse
                                                                                Alternate Namesextensions, user content
                                                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                                700. Parameters.parameter:reportNames.part:table6B-Line18.part:table6B-Line18-den.modifierExtension
                                                                                Definition

                                                                                May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                                                                Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                                                                ShortExtensions that cannot be ignored even if unrecognized
                                                                                Comments

                                                                                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                                Control0..*
                                                                                TypeExtension
                                                                                Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                                                                Summarytrue
                                                                                Requirements

                                                                                Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                                                                Alternate Namesextensions, user content, modifiers
                                                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                                702. Parameters.parameter:reportNames.part:table6B-Line18.part:table6B-Line18-den.name
                                                                                Definition

                                                                                The name of the parameter (reference to the operation definition).

                                                                                ShortName from the definition
                                                                                Control1..1
                                                                                Typestring
                                                                                Is Modifierfalse
                                                                                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                                Must Supporttrue
                                                                                Summarytrue
                                                                                Fixed Valuetable6B-Line18-Ischmic-Vascular-Disease-CMS164-den
                                                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                704. Parameters.parameter:reportNames.part:table6B-Line18.part:table6B-Line18-den.value[x]
                                                                                Definition

                                                                                If the parameter is a data type.

                                                                                ShortIf parameter is a data type
                                                                                Control1..1
                                                                                This element is affected by the following invariants: inv-1
                                                                                Typeboolean
                                                                                [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                                                                Is Modifierfalse
                                                                                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                                Must Supporttrue
                                                                                Summarytrue
                                                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                706. Parameters.parameter:reportNames.part:table6B-Line18.part:table6B-Line18-den.resource
                                                                                Definition

                                                                                If the parameter is a whole resource.

                                                                                ShortIf parameter is a whole resource
                                                                                Comments

                                                                                When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods.

                                                                                Control0..1
                                                                                This element is affected by the following invariants: inv-1
                                                                                TypeResource
                                                                                Is Modifierfalse
                                                                                Summarytrue
                                                                                708. Parameters.parameter:reportNames.part:table6B-Line18.part:table6B-Line18-den.part
                                                                                Definition

                                                                                A named part of a multi-part parameter.

                                                                                ShortNamed part of a multi-part parameter
                                                                                Comments

                                                                                Only one level of nested parameters is allowed.

                                                                                Control0..*
                                                                                TypeSeettp://hl7.org/fhir/StructureDefinition/Parameters#Parameters.parameter
                                                                                Is Modifierfalse
                                                                                Summarytrue
                                                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                710. Parameters.parameter:reportNames.part:table6B-Line18.part:table6B-Line18-denexcl
                                                                                Slice Nametable6B-Line18-denexcl
                                                                                Definition

                                                                                A named part of a multi-part parameter.

                                                                                ShortNamed part of a multi-part parameter
                                                                                Comments

                                                                                Only one level of nested parameters is allowed.

                                                                                Control0..1
                                                                                TypeBackboneElement
                                                                                Is Modifierfalse
                                                                                Must Supporttrue
                                                                                Summarytrue
                                                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                712. Parameters.parameter:reportNames.part:table6B-Line18.part:table6B-Line18-denexcl.id
                                                                                Definition

                                                                                Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                                                                ShortUnique id for inter-element referencing
                                                                                Control0..1
                                                                                Typestring
                                                                                Is Modifierfalse
                                                                                XML FormatIn the XML format, this property is represented as an attribute.
                                                                                Summaryfalse
                                                                                714. Parameters.parameter:reportNames.part:table6B-Line18.part:table6B-Line18-denexcl.extension
                                                                                Definition

                                                                                May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                                                                ShortAdditional content defined by implementations
                                                                                Comments

                                                                                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                                Control0..*
                                                                                TypeExtension
                                                                                Is Modifierfalse
                                                                                Summaryfalse
                                                                                Alternate Namesextensions, user content
                                                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                                716. Parameters.parameter:reportNames.part:table6B-Line18.part:table6B-Line18-denexcl.modifierExtension
                                                                                Definition

                                                                                May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                                                                Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                                                                ShortExtensions that cannot be ignored even if unrecognized
                                                                                Comments

                                                                                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                                Control0..*
                                                                                TypeExtension
                                                                                Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                                                                Summarytrue
                                                                                Requirements

                                                                                Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                                                                Alternate Namesextensions, user content, modifiers
                                                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                                718. Parameters.parameter:reportNames.part:table6B-Line18.part:table6B-Line18-denexcl.name
                                                                                Definition

                                                                                The name of the parameter (reference to the operation definition).

                                                                                ShortName from the definition
                                                                                Control1..1
                                                                                Typestring
                                                                                Is Modifierfalse
                                                                                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                                Must Supporttrue
                                                                                Summarytrue
                                                                                Fixed Valuetable6B-Line18-Ischmic-Vascular-Disease-CMS164-denexcl
                                                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                720. Parameters.parameter:reportNames.part:table6B-Line18.part:table6B-Line18-denexcl.value[x]
                                                                                Definition

                                                                                If the parameter is a data type.

                                                                                ShortIf parameter is a data type
                                                                                Control1..1
                                                                                This element is affected by the following invariants: inv-1
                                                                                Typeboolean
                                                                                [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                                                                Is Modifierfalse
                                                                                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                                Must Supporttrue
                                                                                Summarytrue
                                                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                722. Parameters.parameter:reportNames.part:table6B-Line18.part:table6B-Line18-denexcl.resource
                                                                                Definition

                                                                                If the parameter is a whole resource.

                                                                                ShortIf parameter is a whole resource
                                                                                Comments

                                                                                When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods.

                                                                                Control0..1
                                                                                This element is affected by the following invariants: inv-1
                                                                                TypeResource
                                                                                Is Modifierfalse
                                                                                Summarytrue
                                                                                724. Parameters.parameter:reportNames.part:table6B-Line18.part:table6B-Line18-denexcl.part
                                                                                Definition

                                                                                A named part of a multi-part parameter.

                                                                                ShortNamed part of a multi-part parameter
                                                                                Comments

                                                                                Only one level of nested parameters is allowed.

                                                                                Control0..*
                                                                                TypeSeettp://hl7.org/fhir/StructureDefinition/Parameters#Parameters.parameter
                                                                                Is Modifierfalse
                                                                                Summarytrue
                                                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                726. Parameters.parameter:reportNames.part:table6B-Line18.part:table6B-Line18-num
                                                                                Slice Nametable6B-Line18-num
                                                                                Definition

                                                                                A named part of a multi-part parameter.

                                                                                ShortNamed part of a multi-part parameter
                                                                                Comments

                                                                                Only one level of nested parameters is allowed.

                                                                                Control0..1
                                                                                TypeBackboneElement
                                                                                Is Modifierfalse
                                                                                Must Supporttrue
                                                                                Summarytrue
                                                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                728. Parameters.parameter:reportNames.part:table6B-Line18.part:table6B-Line18-num.id
                                                                                Definition

                                                                                Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                                                                ShortUnique id for inter-element referencing
                                                                                Control0..1
                                                                                Typestring
                                                                                Is Modifierfalse
                                                                                XML FormatIn the XML format, this property is represented as an attribute.
                                                                                Summaryfalse
                                                                                730. Parameters.parameter:reportNames.part:table6B-Line18.part:table6B-Line18-num.extension
                                                                                Definition

                                                                                May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                                                                ShortAdditional content defined by implementations
                                                                                Comments

                                                                                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                                Control0..*
                                                                                TypeExtension
                                                                                Is Modifierfalse
                                                                                Summaryfalse
                                                                                Alternate Namesextensions, user content
                                                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                                732. Parameters.parameter:reportNames.part:table6B-Line18.part:table6B-Line18-num.modifierExtension
                                                                                Definition

                                                                                May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                                                                Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                                                                ShortExtensions that cannot be ignored even if unrecognized
                                                                                Comments

                                                                                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                                Control0..*
                                                                                TypeExtension
                                                                                Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                                                                Summarytrue
                                                                                Requirements

                                                                                Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                                                                Alternate Namesextensions, user content, modifiers
                                                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                                734. Parameters.parameter:reportNames.part:table6B-Line18.part:table6B-Line18-num.name
                                                                                Definition

                                                                                The name of the parameter (reference to the operation definition).

                                                                                ShortName from the definition
                                                                                Control1..1
                                                                                Typestring
                                                                                Is Modifierfalse
                                                                                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                                Must Supporttrue
                                                                                Summarytrue
                                                                                Fixed Valuetable6B-Line18-Ischmic-Vascular-Disease-CMS164-num
                                                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                736. Parameters.parameter:reportNames.part:table6B-Line18.part:table6B-Line18-num.value[x]
                                                                                Definition

                                                                                If the parameter is a data type.

                                                                                ShortIf parameter is a data type
                                                                                Control1..1
                                                                                This element is affected by the following invariants: inv-1
                                                                                Typeboolean
                                                                                [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                                                                Is Modifierfalse
                                                                                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                                Must Supporttrue
                                                                                Summarytrue
                                                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                738. Parameters.parameter:reportNames.part:table6B-Line18.part:table6B-Line18-num.resource
                                                                                Definition

                                                                                If the parameter is a whole resource.

                                                                                ShortIf parameter is a whole resource
                                                                                Comments

                                                                                When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods.

                                                                                Control0..1
                                                                                This element is affected by the following invariants: inv-1
                                                                                TypeResource
                                                                                Is Modifierfalse
                                                                                Summarytrue
                                                                                740. Parameters.parameter:reportNames.part:table6B-Line18.part:table6B-Line18-num.part
                                                                                Definition

                                                                                A named part of a multi-part parameter.

                                                                                ShortNamed part of a multi-part parameter
                                                                                Comments

                                                                                Only one level of nested parameters is allowed.

                                                                                Control0..*
                                                                                TypeSeettp://hl7.org/fhir/StructureDefinition/Parameters#Parameters.parameter
                                                                                Is Modifierfalse
                                                                                Summarytrue
                                                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                742. Parameters.parameter:reportNames.part:table6B-Line19
                                                                                Slice Nametable6B-Line19
                                                                                Definition

                                                                                A named part of a multi-part parameter.

                                                                                ShortNamed part of a multi-part parameter
                                                                                Comments

                                                                                Only one level of nested parameters is allowed.

                                                                                Control1..1
                                                                                TypeBackboneElement
                                                                                Is Modifierfalse
                                                                                Must Supporttrue
                                                                                Summarytrue
                                                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                744. Parameters.parameter:reportNames.part:table6B-Line19.id
                                                                                Definition

                                                                                Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                                                                ShortUnique id for inter-element referencing
                                                                                Control0..1
                                                                                Typestring
                                                                                Is Modifierfalse
                                                                                XML FormatIn the XML format, this property is represented as an attribute.
                                                                                Summaryfalse
                                                                                746. Parameters.parameter:reportNames.part:table6B-Line19.extension
                                                                                Definition

                                                                                May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                                                                ShortAdditional content defined by implementations
                                                                                Comments

                                                                                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                                Control0..*
                                                                                TypeExtension
                                                                                Is Modifierfalse
                                                                                Summaryfalse
                                                                                Alternate Namesextensions, user content
                                                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                                748. Parameters.parameter:reportNames.part:table6B-Line19.modifierExtension
                                                                                Definition

                                                                                May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                                                                Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                                                                ShortExtensions that cannot be ignored even if unrecognized
                                                                                Comments

                                                                                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                                Control0..*
                                                                                TypeExtension
                                                                                Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                                                                Summarytrue
                                                                                Requirements

                                                                                Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                                                                Alternate Namesextensions, user content, modifiers
                                                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                                750. Parameters.parameter:reportNames.part:table6B-Line19.name
                                                                                Definition

                                                                                The name of the parameter (reference to the operation definition).

                                                                                ShortName from the definition
                                                                                Control1..1
                                                                                Typestring
                                                                                Is Modifierfalse
                                                                                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                                Must Supporttrue
                                                                                Summarytrue
                                                                                Fixed Valuetable6B-Line19-Colorectal-Cancer-Screening-CMS130
                                                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                752. Parameters.parameter:reportNames.part:table6B-Line19.value[x]
                                                                                Definition

                                                                                If the parameter is a data type.

                                                                                ShortIf parameter is a data type
                                                                                Control1..1
                                                                                This element is affected by the following invariants: inv-1
                                                                                Typeboolean
                                                                                [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                                                                Is Modifierfalse
                                                                                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                                Must Supporttrue
                                                                                Summarytrue
                                                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                754. Parameters.parameter:reportNames.part:table6B-Line19.resource
                                                                                Definition

                                                                                If the parameter is a whole resource.

                                                                                ShortIf parameter is a whole resource
                                                                                Comments

                                                                                When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods.

                                                                                Control0..1
                                                                                This element is affected by the following invariants: inv-1
                                                                                TypeResource
                                                                                Is Modifierfalse
                                                                                Summarytrue
                                                                                756. Parameters.parameter:reportNames.part:table6B-Line19.part
                                                                                Definition

                                                                                A named part of a multi-part parameter.

                                                                                ShortNamed part of a multi-part parameter
                                                                                Comments

                                                                                Only one level of nested parameters is allowed.

                                                                                Control0..*
                                                                                TypeSeettp://hl7.org/fhir/StructureDefinition/Parameters#Parameters.parameter
                                                                                Is Modifierfalse
                                                                                Must Supporttrue
                                                                                Summarytrue
                                                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                SlicingThis element introduces a set of slices on Parameters.parameter.part.part. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                                                                                • value @ $this.name
                                                                                • 758. Parameters.parameter:reportNames.part:table6B-Line19.part:table6B-Line19-den
                                                                                  Slice Nametable6B-Line19-den
                                                                                  Definition

                                                                                  A named part of a multi-part parameter.

                                                                                  ShortNamed part of a multi-part parameter
                                                                                  Comments

                                                                                  Only one level of nested parameters is allowed.

                                                                                  Control0..1
                                                                                  TypeBackboneElement
                                                                                  Is Modifierfalse
                                                                                  Must Supporttrue
                                                                                  Summarytrue
                                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                  760. Parameters.parameter:reportNames.part:table6B-Line19.part:table6B-Line19-den.id
                                                                                  Definition

                                                                                  Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                                                                  ShortUnique id for inter-element referencing
                                                                                  Control0..1
                                                                                  Typestring
                                                                                  Is Modifierfalse
                                                                                  XML FormatIn the XML format, this property is represented as an attribute.
                                                                                  Summaryfalse
                                                                                  762. Parameters.parameter:reportNames.part:table6B-Line19.part:table6B-Line19-den.extension
                                                                                  Definition

                                                                                  May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                                                                  ShortAdditional content defined by implementations
                                                                                  Comments

                                                                                  There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                                  Control0..*
                                                                                  TypeExtension
                                                                                  Is Modifierfalse
                                                                                  Summaryfalse
                                                                                  Alternate Namesextensions, user content
                                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                                  764. Parameters.parameter:reportNames.part:table6B-Line19.part:table6B-Line19-den.modifierExtension
                                                                                  Definition

                                                                                  May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                                                                  Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                                                                  ShortExtensions that cannot be ignored even if unrecognized
                                                                                  Comments

                                                                                  There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                                  Control0..*
                                                                                  TypeExtension
                                                                                  Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                                                                  Summarytrue
                                                                                  Requirements

                                                                                  Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                                                                  Alternate Namesextensions, user content, modifiers
                                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                                  766. Parameters.parameter:reportNames.part:table6B-Line19.part:table6B-Line19-den.name
                                                                                  Definition

                                                                                  The name of the parameter (reference to the operation definition).

                                                                                  ShortName from the definition
                                                                                  Control1..1
                                                                                  Typestring
                                                                                  Is Modifierfalse
                                                                                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                                  Must Supporttrue
                                                                                  Summarytrue
                                                                                  Fixed Valuetable6B-Line19-Colorectal-Cancer-Screening-CMS130-den
                                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                  768. Parameters.parameter:reportNames.part:table6B-Line19.part:table6B-Line19-den.value[x]
                                                                                  Definition

                                                                                  If the parameter is a data type.

                                                                                  ShortIf parameter is a data type
                                                                                  Control1..1
                                                                                  This element is affected by the following invariants: inv-1
                                                                                  Typeboolean
                                                                                  [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                                                                  Is Modifierfalse
                                                                                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                                  Must Supporttrue
                                                                                  Summarytrue
                                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                  770. Parameters.parameter:reportNames.part:table6B-Line19.part:table6B-Line19-den.resource
                                                                                  Definition

                                                                                  If the parameter is a whole resource.

                                                                                  ShortIf parameter is a whole resource
                                                                                  Comments

                                                                                  When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods.

                                                                                  Control0..1
                                                                                  This element is affected by the following invariants: inv-1
                                                                                  TypeResource
                                                                                  Is Modifierfalse
                                                                                  Summarytrue
                                                                                  772. Parameters.parameter:reportNames.part:table6B-Line19.part:table6B-Line19-den.part
                                                                                  Definition

                                                                                  A named part of a multi-part parameter.

                                                                                  ShortNamed part of a multi-part parameter
                                                                                  Comments

                                                                                  Only one level of nested parameters is allowed.

                                                                                  Control0..*
                                                                                  TypeSeettp://hl7.org/fhir/StructureDefinition/Parameters#Parameters.parameter
                                                                                  Is Modifierfalse
                                                                                  Summarytrue
                                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                  774. Parameters.parameter:reportNames.part:table6B-Line19.part:table6B-Line19-denexcl
                                                                                  Slice Nametable6B-Line19-denexcl
                                                                                  Definition

                                                                                  A named part of a multi-part parameter.

                                                                                  ShortNamed part of a multi-part parameter
                                                                                  Comments

                                                                                  Only one level of nested parameters is allowed.

                                                                                  Control0..1
                                                                                  TypeBackboneElement
                                                                                  Is Modifierfalse
                                                                                  Must Supporttrue
                                                                                  Summarytrue
                                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                  776. Parameters.parameter:reportNames.part:table6B-Line19.part:table6B-Line19-denexcl.id
                                                                                  Definition

                                                                                  Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                                                                  ShortUnique id for inter-element referencing
                                                                                  Control0..1
                                                                                  Typestring
                                                                                  Is Modifierfalse
                                                                                  XML FormatIn the XML format, this property is represented as an attribute.
                                                                                  Summaryfalse
                                                                                  778. Parameters.parameter:reportNames.part:table6B-Line19.part:table6B-Line19-denexcl.extension
                                                                                  Definition

                                                                                  May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                                                                  ShortAdditional content defined by implementations
                                                                                  Comments

                                                                                  There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                                  Control0..*
                                                                                  TypeExtension
                                                                                  Is Modifierfalse
                                                                                  Summaryfalse
                                                                                  Alternate Namesextensions, user content
                                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                                  780. Parameters.parameter:reportNames.part:table6B-Line19.part:table6B-Line19-denexcl.modifierExtension
                                                                                  Definition

                                                                                  May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                                                                  Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                                                                  ShortExtensions that cannot be ignored even if unrecognized
                                                                                  Comments

                                                                                  There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                                  Control0..*
                                                                                  TypeExtension
                                                                                  Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                                                                  Summarytrue
                                                                                  Requirements

                                                                                  Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                                                                  Alternate Namesextensions, user content, modifiers
                                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                                  782. Parameters.parameter:reportNames.part:table6B-Line19.part:table6B-Line19-denexcl.name
                                                                                  Definition

                                                                                  The name of the parameter (reference to the operation definition).

                                                                                  ShortName from the definition
                                                                                  Control1..1
                                                                                  Typestring
                                                                                  Is Modifierfalse
                                                                                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                                  Must Supporttrue
                                                                                  Summarytrue
                                                                                  Fixed Valuetable6B-Line19-Colorectal-Cancer-Screening-CMS130-denexcl
                                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                  784. Parameters.parameter:reportNames.part:table6B-Line19.part:table6B-Line19-denexcl.value[x]
                                                                                  Definition

                                                                                  If the parameter is a data type.

                                                                                  ShortIf parameter is a data type
                                                                                  Control1..1
                                                                                  This element is affected by the following invariants: inv-1
                                                                                  Typeboolean
                                                                                  [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                                                                  Is Modifierfalse
                                                                                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                                  Must Supporttrue
                                                                                  Summarytrue
                                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                  786. Parameters.parameter:reportNames.part:table6B-Line19.part:table6B-Line19-denexcl.resource
                                                                                  Definition

                                                                                  If the parameter is a whole resource.

                                                                                  ShortIf parameter is a whole resource
                                                                                  Comments

                                                                                  When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods.

                                                                                  Control0..1
                                                                                  This element is affected by the following invariants: inv-1
                                                                                  TypeResource
                                                                                  Is Modifierfalse
                                                                                  Summarytrue
                                                                                  788. Parameters.parameter:reportNames.part:table6B-Line19.part:table6B-Line19-denexcl.part
                                                                                  Definition

                                                                                  A named part of a multi-part parameter.

                                                                                  ShortNamed part of a multi-part parameter
                                                                                  Comments

                                                                                  Only one level of nested parameters is allowed.

                                                                                  Control0..*
                                                                                  TypeSeettp://hl7.org/fhir/StructureDefinition/Parameters#Parameters.parameter
                                                                                  Is Modifierfalse
                                                                                  Summarytrue
                                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                  790. Parameters.parameter:reportNames.part:table6B-Line19.part:table6B-Line19-num
                                                                                  Slice Nametable6B-Line19-num
                                                                                  Definition

                                                                                  A named part of a multi-part parameter.

                                                                                  ShortNamed part of a multi-part parameter
                                                                                  Comments

                                                                                  Only one level of nested parameters is allowed.

                                                                                  Control0..1
                                                                                  TypeBackboneElement
                                                                                  Is Modifierfalse
                                                                                  Must Supporttrue
                                                                                  Summarytrue
                                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                  792. Parameters.parameter:reportNames.part:table6B-Line19.part:table6B-Line19-num.id
                                                                                  Definition

                                                                                  Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                                                                  ShortUnique id for inter-element referencing
                                                                                  Control0..1
                                                                                  Typestring
                                                                                  Is Modifierfalse
                                                                                  XML FormatIn the XML format, this property is represented as an attribute.
                                                                                  Summaryfalse
                                                                                  794. Parameters.parameter:reportNames.part:table6B-Line19.part:table6B-Line19-num.extension
                                                                                  Definition

                                                                                  May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                                                                  ShortAdditional content defined by implementations
                                                                                  Comments

                                                                                  There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                                  Control0..*
                                                                                  TypeExtension
                                                                                  Is Modifierfalse
                                                                                  Summaryfalse
                                                                                  Alternate Namesextensions, user content
                                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                                  796. Parameters.parameter:reportNames.part:table6B-Line19.part:table6B-Line19-num.modifierExtension
                                                                                  Definition

                                                                                  May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                                                                  Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                                                                  ShortExtensions that cannot be ignored even if unrecognized
                                                                                  Comments

                                                                                  There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                                  Control0..*
                                                                                  TypeExtension
                                                                                  Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                                                                  Summarytrue
                                                                                  Requirements

                                                                                  Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                                                                  Alternate Namesextensions, user content, modifiers
                                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                                  798. Parameters.parameter:reportNames.part:table6B-Line19.part:table6B-Line19-num.name
                                                                                  Definition

                                                                                  The name of the parameter (reference to the operation definition).

                                                                                  ShortName from the definition
                                                                                  Control1..1
                                                                                  Typestring
                                                                                  Is Modifierfalse
                                                                                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                                  Must Supporttrue
                                                                                  Summarytrue
                                                                                  Fixed Valuetable6B-Line19-Colorectal-Cancer-Screening-CMS130-num
                                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                  800. Parameters.parameter:reportNames.part:table6B-Line19.part:table6B-Line19-num.value[x]
                                                                                  Definition

                                                                                  If the parameter is a data type.

                                                                                  ShortIf parameter is a data type
                                                                                  Control1..1
                                                                                  This element is affected by the following invariants: inv-1
                                                                                  Typeboolean
                                                                                  [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                                                                  Is Modifierfalse
                                                                                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                                  Must Supporttrue
                                                                                  Summarytrue
                                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                  802. Parameters.parameter:reportNames.part:table6B-Line19.part:table6B-Line19-num.resource
                                                                                  Definition

                                                                                  If the parameter is a whole resource.

                                                                                  ShortIf parameter is a whole resource
                                                                                  Comments

                                                                                  When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods.

                                                                                  Control0..1
                                                                                  This element is affected by the following invariants: inv-1
                                                                                  TypeResource
                                                                                  Is Modifierfalse
                                                                                  Summarytrue
                                                                                  804. Parameters.parameter:reportNames.part:table6B-Line19.part:table6B-Line19-num.part
                                                                                  Definition

                                                                                  A named part of a multi-part parameter.

                                                                                  ShortNamed part of a multi-part parameter
                                                                                  Comments

                                                                                  Only one level of nested parameters is allowed.

                                                                                  Control0..*
                                                                                  TypeSeettp://hl7.org/fhir/StructureDefinition/Parameters#Parameters.parameter
                                                                                  Is Modifierfalse
                                                                                  Summarytrue
                                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                  806. Parameters.parameter:reportNames.part:table6B-Line20
                                                                                  Slice Nametable6B-Line20
                                                                                  Definition

                                                                                  A named part of a multi-part parameter.

                                                                                  ShortNamed part of a multi-part parameter
                                                                                  Comments

                                                                                  Only one level of nested parameters is allowed.

                                                                                  Control1..1
                                                                                  TypeBackboneElement
                                                                                  Is Modifierfalse
                                                                                  Must Supporttrue
                                                                                  Summarytrue
                                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                  808. Parameters.parameter:reportNames.part:table6B-Line20.id
                                                                                  Definition

                                                                                  Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                                                                  ShortUnique id for inter-element referencing
                                                                                  Control0..1
                                                                                  Typestring
                                                                                  Is Modifierfalse
                                                                                  XML FormatIn the XML format, this property is represented as an attribute.
                                                                                  Summaryfalse
                                                                                  810. Parameters.parameter:reportNames.part:table6B-Line20.extension
                                                                                  Definition

                                                                                  May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                                                                  ShortAdditional content defined by implementations
                                                                                  Comments

                                                                                  There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                                  Control0..*
                                                                                  TypeExtension
                                                                                  Is Modifierfalse
                                                                                  Summaryfalse
                                                                                  Alternate Namesextensions, user content
                                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                                  812. Parameters.parameter:reportNames.part:table6B-Line20.modifierExtension
                                                                                  Definition

                                                                                  May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                                                                  Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                                                                  ShortExtensions that cannot be ignored even if unrecognized
                                                                                  Comments

                                                                                  There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                                  Control0..*
                                                                                  TypeExtension
                                                                                  Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                                                                  Summarytrue
                                                                                  Requirements

                                                                                  Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                                                                  Alternate Namesextensions, user content, modifiers
                                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                                  814. Parameters.parameter:reportNames.part:table6B-Line20.name
                                                                                  Definition

                                                                                  The name of the parameter (reference to the operation definition).

                                                                                  ShortName from the definition
                                                                                  Control1..1
                                                                                  Typestring
                                                                                  Is Modifierfalse
                                                                                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                                  Must Supporttrue
                                                                                  Summarytrue
                                                                                  Fixed Valuetable6B-Line20-HIV-Linkage-To-Care
                                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                  816. Parameters.parameter:reportNames.part:table6B-Line20.value[x]
                                                                                  Definition

                                                                                  If the parameter is a data type.

                                                                                  ShortIf parameter is a data type
                                                                                  Control1..1
                                                                                  This element is affected by the following invariants: inv-1
                                                                                  Typeboolean
                                                                                  [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                                                                  Is Modifierfalse
                                                                                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                                  Must Supporttrue
                                                                                  Summarytrue
                                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                  818. Parameters.parameter:reportNames.part:table6B-Line20.resource
                                                                                  Definition

                                                                                  If the parameter is a whole resource.

                                                                                  ShortIf parameter is a whole resource
                                                                                  Comments

                                                                                  When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods.

                                                                                  Control0..1
                                                                                  This element is affected by the following invariants: inv-1
                                                                                  TypeResource
                                                                                  Is Modifierfalse
                                                                                  Summarytrue
                                                                                  820. Parameters.parameter:reportNames.part:table6B-Line20.part
                                                                                  Definition

                                                                                  A named part of a multi-part parameter.

                                                                                  ShortNamed part of a multi-part parameter
                                                                                  Comments

                                                                                  Only one level of nested parameters is allowed.

                                                                                  Control0..*
                                                                                  TypeSeettp://hl7.org/fhir/StructureDefinition/Parameters#Parameters.parameter
                                                                                  Is Modifierfalse
                                                                                  Must Supporttrue
                                                                                  Summarytrue
                                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                  SlicingThis element introduces a set of slices on Parameters.parameter.part.part. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                                                                                  • value @ $this.name
                                                                                  • 822. Parameters.parameter:reportNames.part:table6B-Line20.part:table6B-Line20-den
                                                                                    Slice Nametable6B-Line20-den
                                                                                    Definition

                                                                                    A named part of a multi-part parameter.

                                                                                    ShortNamed part of a multi-part parameter
                                                                                    Comments

                                                                                    Only one level of nested parameters is allowed.

                                                                                    Control0..1
                                                                                    TypeBackboneElement
                                                                                    Is Modifierfalse
                                                                                    Must Supporttrue
                                                                                    Summarytrue
                                                                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                    824. Parameters.parameter:reportNames.part:table6B-Line20.part:table6B-Line20-den.id
                                                                                    Definition

                                                                                    Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                                                                    ShortUnique id for inter-element referencing
                                                                                    Control0..1
                                                                                    Typestring
                                                                                    Is Modifierfalse
                                                                                    XML FormatIn the XML format, this property is represented as an attribute.
                                                                                    Summaryfalse
                                                                                    826. Parameters.parameter:reportNames.part:table6B-Line20.part:table6B-Line20-den.extension
                                                                                    Definition

                                                                                    May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                                                                    ShortAdditional content defined by implementations
                                                                                    Comments

                                                                                    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                                    Control0..*
                                                                                    TypeExtension
                                                                                    Is Modifierfalse
                                                                                    Summaryfalse
                                                                                    Alternate Namesextensions, user content
                                                                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                                    828. Parameters.parameter:reportNames.part:table6B-Line20.part:table6B-Line20-den.modifierExtension
                                                                                    Definition

                                                                                    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                                                                    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                                                                    ShortExtensions that cannot be ignored even if unrecognized
                                                                                    Comments

                                                                                    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                                    Control0..*
                                                                                    TypeExtension
                                                                                    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                                                                    Summarytrue
                                                                                    Requirements

                                                                                    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                                                                    Alternate Namesextensions, user content, modifiers
                                                                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                                    830. Parameters.parameter:reportNames.part:table6B-Line20.part:table6B-Line20-den.name
                                                                                    Definition

                                                                                    The name of the parameter (reference to the operation definition).

                                                                                    ShortName from the definition
                                                                                    Control1..1
                                                                                    Typestring
                                                                                    Is Modifierfalse
                                                                                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                                    Must Supporttrue
                                                                                    Summarytrue
                                                                                    Fixed Valuetable6B-Line20-HIV-Linkage-To-Care-den
                                                                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                    832. Parameters.parameter:reportNames.part:table6B-Line20.part:table6B-Line20-den.value[x]
                                                                                    Definition

                                                                                    If the parameter is a data type.

                                                                                    ShortIf parameter is a data type
                                                                                    Control1..1
                                                                                    This element is affected by the following invariants: inv-1
                                                                                    Typeboolean
                                                                                    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                                                                    Is Modifierfalse
                                                                                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                                    Must Supporttrue
                                                                                    Summarytrue
                                                                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                    834. Parameters.parameter:reportNames.part:table6B-Line20.part:table6B-Line20-den.resource
                                                                                    Definition

                                                                                    If the parameter is a whole resource.

                                                                                    ShortIf parameter is a whole resource
                                                                                    Comments

                                                                                    When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods.

                                                                                    Control0..1
                                                                                    This element is affected by the following invariants: inv-1
                                                                                    TypeResource
                                                                                    Is Modifierfalse
                                                                                    Summarytrue
                                                                                    836. Parameters.parameter:reportNames.part:table6B-Line20.part:table6B-Line20-den.part
                                                                                    Definition

                                                                                    A named part of a multi-part parameter.

                                                                                    ShortNamed part of a multi-part parameter
                                                                                    Comments

                                                                                    Only one level of nested parameters is allowed.

                                                                                    Control0..*
                                                                                    TypeSeettp://hl7.org/fhir/StructureDefinition/Parameters#Parameters.parameter
                                                                                    Is Modifierfalse
                                                                                    Summarytrue
                                                                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                    838. Parameters.parameter:reportNames.part:table6B-Line20.part:table6B-Line20-denexcl
                                                                                    Slice Nametable6B-Line20-denexcl
                                                                                    Definition

                                                                                    A named part of a multi-part parameter.

                                                                                    ShortNamed part of a multi-part parameter
                                                                                    Comments

                                                                                    Only one level of nested parameters is allowed.

                                                                                    Control0..1
                                                                                    TypeBackboneElement
                                                                                    Is Modifierfalse
                                                                                    Must Supporttrue
                                                                                    Summarytrue
                                                                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                    840. Parameters.parameter:reportNames.part:table6B-Line20.part:table6B-Line20-denexcl.id
                                                                                    Definition

                                                                                    Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                                                                    ShortUnique id for inter-element referencing
                                                                                    Control0..1
                                                                                    Typestring
                                                                                    Is Modifierfalse
                                                                                    XML FormatIn the XML format, this property is represented as an attribute.
                                                                                    Summaryfalse
                                                                                    842. Parameters.parameter:reportNames.part:table6B-Line20.part:table6B-Line20-denexcl.extension
                                                                                    Definition

                                                                                    May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                                                                    ShortAdditional content defined by implementations
                                                                                    Comments

                                                                                    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                                    Control0..*
                                                                                    TypeExtension
                                                                                    Is Modifierfalse
                                                                                    Summaryfalse
                                                                                    Alternate Namesextensions, user content
                                                                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                                    844. Parameters.parameter:reportNames.part:table6B-Line20.part:table6B-Line20-denexcl.modifierExtension
                                                                                    Definition

                                                                                    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                                                                    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                                                                    ShortExtensions that cannot be ignored even if unrecognized
                                                                                    Comments

                                                                                    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                                    Control0..*
                                                                                    TypeExtension
                                                                                    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                                                                    Summarytrue
                                                                                    Requirements

                                                                                    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                                                                    Alternate Namesextensions, user content, modifiers
                                                                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                                    846. Parameters.parameter:reportNames.part:table6B-Line20.part:table6B-Line20-denexcl.name
                                                                                    Definition

                                                                                    The name of the parameter (reference to the operation definition).

                                                                                    ShortName from the definition
                                                                                    Control1..1
                                                                                    Typestring
                                                                                    Is Modifierfalse
                                                                                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                                    Must Supporttrue
                                                                                    Summarytrue
                                                                                    Fixed Valuetable6B-Line20-HIV-Linkage-To-Care-denexcl
                                                                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                    848. Parameters.parameter:reportNames.part:table6B-Line20.part:table6B-Line20-denexcl.value[x]
                                                                                    Definition

                                                                                    If the parameter is a data type.

                                                                                    ShortIf parameter is a data type
                                                                                    Control1..1
                                                                                    This element is affected by the following invariants: inv-1
                                                                                    Typeboolean
                                                                                    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                                                                    Is Modifierfalse
                                                                                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                                    Must Supporttrue
                                                                                    Summarytrue
                                                                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                    850. Parameters.parameter:reportNames.part:table6B-Line20.part:table6B-Line20-denexcl.resource
                                                                                    Definition

                                                                                    If the parameter is a whole resource.

                                                                                    ShortIf parameter is a whole resource
                                                                                    Comments

                                                                                    When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods.

                                                                                    Control0..1
                                                                                    This element is affected by the following invariants: inv-1
                                                                                    TypeResource
                                                                                    Is Modifierfalse
                                                                                    Summarytrue
                                                                                    852. Parameters.parameter:reportNames.part:table6B-Line20.part:table6B-Line20-denexcl.part
                                                                                    Definition

                                                                                    A named part of a multi-part parameter.

                                                                                    ShortNamed part of a multi-part parameter
                                                                                    Comments

                                                                                    Only one level of nested parameters is allowed.

                                                                                    Control0..*
                                                                                    TypeSeettp://hl7.org/fhir/StructureDefinition/Parameters#Parameters.parameter
                                                                                    Is Modifierfalse
                                                                                    Summarytrue
                                                                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                    854. Parameters.parameter:reportNames.part:table6B-Line20.part:table6B-Line20-num
                                                                                    Slice Nametable6B-Line20-num
                                                                                    Definition

                                                                                    A named part of a multi-part parameter.

                                                                                    ShortNamed part of a multi-part parameter
                                                                                    Comments

                                                                                    Only one level of nested parameters is allowed.

                                                                                    Control0..1
                                                                                    TypeBackboneElement
                                                                                    Is Modifierfalse
                                                                                    Must Supporttrue
                                                                                    Summarytrue
                                                                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                    856. Parameters.parameter:reportNames.part:table6B-Line20.part:table6B-Line20-num.id
                                                                                    Definition

                                                                                    Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                                                                    ShortUnique id for inter-element referencing
                                                                                    Control0..1
                                                                                    Typestring
                                                                                    Is Modifierfalse
                                                                                    XML FormatIn the XML format, this property is represented as an attribute.
                                                                                    Summaryfalse
                                                                                    858. Parameters.parameter:reportNames.part:table6B-Line20.part:table6B-Line20-num.extension
                                                                                    Definition

                                                                                    May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                                                                    ShortAdditional content defined by implementations
                                                                                    Comments

                                                                                    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                                    Control0..*
                                                                                    TypeExtension
                                                                                    Is Modifierfalse
                                                                                    Summaryfalse
                                                                                    Alternate Namesextensions, user content
                                                                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                                    860. Parameters.parameter:reportNames.part:table6B-Line20.part:table6B-Line20-num.modifierExtension
                                                                                    Definition

                                                                                    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                                                                    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                                                                    ShortExtensions that cannot be ignored even if unrecognized
                                                                                    Comments

                                                                                    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                                    Control0..*
                                                                                    TypeExtension
                                                                                    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                                                                    Summarytrue
                                                                                    Requirements

                                                                                    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                                                                    Alternate Namesextensions, user content, modifiers
                                                                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                                    862. Parameters.parameter:reportNames.part:table6B-Line20.part:table6B-Line20-num.name
                                                                                    Definition

                                                                                    The name of the parameter (reference to the operation definition).

                                                                                    ShortName from the definition
                                                                                    Control1..1
                                                                                    Typestring
                                                                                    Is Modifierfalse
                                                                                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                                    Must Supporttrue
                                                                                    Summarytrue
                                                                                    Fixed Valuetable6B-Line20-HIV-Linkage-To-Care-num
                                                                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                    864. Parameters.parameter:reportNames.part:table6B-Line20.part:table6B-Line20-num.value[x]
                                                                                    Definition

                                                                                    If the parameter is a data type.

                                                                                    ShortIf parameter is a data type
                                                                                    Control1..1
                                                                                    This element is affected by the following invariants: inv-1
                                                                                    Typeboolean
                                                                                    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                                                                    Is Modifierfalse
                                                                                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                                    Must Supporttrue
                                                                                    Summarytrue
                                                                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                    866. Parameters.parameter:reportNames.part:table6B-Line20.part:table6B-Line20-num.resource
                                                                                    Definition

                                                                                    If the parameter is a whole resource.

                                                                                    ShortIf parameter is a whole resource
                                                                                    Comments

                                                                                    When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods.

                                                                                    Control0..1
                                                                                    This element is affected by the following invariants: inv-1
                                                                                    TypeResource
                                                                                    Is Modifierfalse
                                                                                    Summarytrue
                                                                                    868. Parameters.parameter:reportNames.part:table6B-Line20.part:table6B-Line20-num.part
                                                                                    Definition

                                                                                    A named part of a multi-part parameter.

                                                                                    ShortNamed part of a multi-part parameter
                                                                                    Comments

                                                                                    Only one level of nested parameters is allowed.

                                                                                    Control0..*
                                                                                    TypeSeettp://hl7.org/fhir/StructureDefinition/Parameters#Parameters.parameter
                                                                                    Is Modifierfalse
                                                                                    Summarytrue
                                                                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                    870. Parameters.parameter:reportNames.part:table6B-Line20a
                                                                                    Slice Nametable6B-Line20a
                                                                                    Definition

                                                                                    A named part of a multi-part parameter.

                                                                                    ShortNamed part of a multi-part parameter
                                                                                    Comments

                                                                                    Only one level of nested parameters is allowed.

                                                                                    Control1..1
                                                                                    TypeBackboneElement
                                                                                    Is Modifierfalse
                                                                                    Must Supporttrue
                                                                                    Summarytrue
                                                                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                    872. Parameters.parameter:reportNames.part:table6B-Line20a.id
                                                                                    Definition

                                                                                    Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                                                                    ShortUnique id for inter-element referencing
                                                                                    Control0..1
                                                                                    Typestring
                                                                                    Is Modifierfalse
                                                                                    XML FormatIn the XML format, this property is represented as an attribute.
                                                                                    Summaryfalse
                                                                                    874. Parameters.parameter:reportNames.part:table6B-Line20a.extension
                                                                                    Definition

                                                                                    May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                                                                    ShortAdditional content defined by implementations
                                                                                    Comments

                                                                                    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                                    Control0..*
                                                                                    TypeExtension
                                                                                    Is Modifierfalse
                                                                                    Summaryfalse
                                                                                    Alternate Namesextensions, user content
                                                                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                                    876. Parameters.parameter:reportNames.part:table6B-Line20a.modifierExtension
                                                                                    Definition

                                                                                    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                                                                    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                                                                    ShortExtensions that cannot be ignored even if unrecognized
                                                                                    Comments

                                                                                    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                                    Control0..*
                                                                                    TypeExtension
                                                                                    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                                                                    Summarytrue
                                                                                    Requirements

                                                                                    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                                                                    Alternate Namesextensions, user content, modifiers
                                                                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                                    878. Parameters.parameter:reportNames.part:table6B-Line20a.name
                                                                                    Definition

                                                                                    The name of the parameter (reference to the operation definition).

                                                                                    ShortName from the definition
                                                                                    Control1..1
                                                                                    Typestring
                                                                                    Is Modifierfalse
                                                                                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                                    Must Supporttrue
                                                                                    Summarytrue
                                                                                    Fixed Valuetable6B-Line20a-HIV-Screening-CMS349
                                                                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                    880. Parameters.parameter:reportNames.part:table6B-Line20a.value[x]
                                                                                    Definition

                                                                                    If the parameter is a data type.

                                                                                    ShortIf parameter is a data type
                                                                                    Control1..1
                                                                                    This element is affected by the following invariants: inv-1
                                                                                    Typeboolean
                                                                                    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                                                                    Is Modifierfalse
                                                                                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                                    Must Supporttrue
                                                                                    Summarytrue
                                                                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                    882. Parameters.parameter:reportNames.part:table6B-Line20a.resource
                                                                                    Definition

                                                                                    If the parameter is a whole resource.

                                                                                    ShortIf parameter is a whole resource
                                                                                    Comments

                                                                                    When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods.

                                                                                    Control0..1
                                                                                    This element is affected by the following invariants: inv-1
                                                                                    TypeResource
                                                                                    Is Modifierfalse
                                                                                    Summarytrue
                                                                                    884. Parameters.parameter:reportNames.part:table6B-Line20a.part
                                                                                    Definition

                                                                                    A named part of a multi-part parameter.

                                                                                    ShortNamed part of a multi-part parameter
                                                                                    Comments

                                                                                    Only one level of nested parameters is allowed.

                                                                                    Control0..*
                                                                                    TypeSeettp://hl7.org/fhir/StructureDefinition/Parameters#Parameters.parameter
                                                                                    Is Modifierfalse
                                                                                    Must Supporttrue
                                                                                    Summarytrue
                                                                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                    SlicingThis element introduces a set of slices on Parameters.parameter.part.part. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                                                                                    • value @ $this.name
                                                                                    • 886. Parameters.parameter:reportNames.part:table6B-Line20a.part:table6B-Line20a-den
                                                                                      Slice Nametable6B-Line20a-den
                                                                                      Definition

                                                                                      A named part of a multi-part parameter.

                                                                                      ShortNamed part of a multi-part parameter
                                                                                      Comments

                                                                                      Only one level of nested parameters is allowed.

                                                                                      Control0..1
                                                                                      TypeBackboneElement
                                                                                      Is Modifierfalse
                                                                                      Must Supporttrue
                                                                                      Summarytrue
                                                                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                      888. Parameters.parameter:reportNames.part:table6B-Line20a.part:table6B-Line20a-den.id
                                                                                      Definition

                                                                                      Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                                                                      ShortUnique id for inter-element referencing
                                                                                      Control0..1
                                                                                      Typestring
                                                                                      Is Modifierfalse
                                                                                      XML FormatIn the XML format, this property is represented as an attribute.
                                                                                      Summaryfalse
                                                                                      890. Parameters.parameter:reportNames.part:table6B-Line20a.part:table6B-Line20a-den.extension
                                                                                      Definition

                                                                                      May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                                                                      ShortAdditional content defined by implementations
                                                                                      Comments

                                                                                      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                                      Control0..*
                                                                                      TypeExtension
                                                                                      Is Modifierfalse
                                                                                      Summaryfalse
                                                                                      Alternate Namesextensions, user content
                                                                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                                      892. Parameters.parameter:reportNames.part:table6B-Line20a.part:table6B-Line20a-den.modifierExtension
                                                                                      Definition

                                                                                      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                                                                      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                                                                      ShortExtensions that cannot be ignored even if unrecognized
                                                                                      Comments

                                                                                      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                                      Control0..*
                                                                                      TypeExtension
                                                                                      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                                                                      Summarytrue
                                                                                      Requirements

                                                                                      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                                                                      Alternate Namesextensions, user content, modifiers
                                                                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                                      894. Parameters.parameter:reportNames.part:table6B-Line20a.part:table6B-Line20a-den.name
                                                                                      Definition

                                                                                      The name of the parameter (reference to the operation definition).

                                                                                      ShortName from the definition
                                                                                      Control1..1
                                                                                      Typestring
                                                                                      Is Modifierfalse
                                                                                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                                      Must Supporttrue
                                                                                      Summarytrue
                                                                                      Fixed Valuetable6B-Line20a-HIV-Screening-CMS349-den
                                                                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                      896. Parameters.parameter:reportNames.part:table6B-Line20a.part:table6B-Line20a-den.value[x]
                                                                                      Definition

                                                                                      If the parameter is a data type.

                                                                                      ShortIf parameter is a data type
                                                                                      Control1..1
                                                                                      This element is affected by the following invariants: inv-1
                                                                                      Typeboolean
                                                                                      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                                                                      Is Modifierfalse
                                                                                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                                      Must Supporttrue
                                                                                      Summarytrue
                                                                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                      898. Parameters.parameter:reportNames.part:table6B-Line20a.part:table6B-Line20a-den.resource
                                                                                      Definition

                                                                                      If the parameter is a whole resource.

                                                                                      ShortIf parameter is a whole resource
                                                                                      Comments

                                                                                      When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods.

                                                                                      Control0..1
                                                                                      This element is affected by the following invariants: inv-1
                                                                                      TypeResource
                                                                                      Is Modifierfalse
                                                                                      Summarytrue
                                                                                      900. Parameters.parameter:reportNames.part:table6B-Line20a.part:table6B-Line20a-den.part
                                                                                      Definition

                                                                                      A named part of a multi-part parameter.

                                                                                      ShortNamed part of a multi-part parameter
                                                                                      Comments

                                                                                      Only one level of nested parameters is allowed.

                                                                                      Control0..*
                                                                                      TypeSeettp://hl7.org/fhir/StructureDefinition/Parameters#Parameters.parameter
                                                                                      Is Modifierfalse
                                                                                      Summarytrue
                                                                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                      902. Parameters.parameter:reportNames.part:table6B-Line20a.part:table6B-Line20a-denexcl
                                                                                      Slice Nametable6B-Line20a-denexcl
                                                                                      Definition

                                                                                      A named part of a multi-part parameter.

                                                                                      ShortNamed part of a multi-part parameter
                                                                                      Comments

                                                                                      Only one level of nested parameters is allowed.

                                                                                      Control0..1
                                                                                      TypeBackboneElement
                                                                                      Is Modifierfalse
                                                                                      Must Supporttrue
                                                                                      Summarytrue
                                                                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                      904. Parameters.parameter:reportNames.part:table6B-Line20a.part:table6B-Line20a-denexcl.id
                                                                                      Definition

                                                                                      Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                                                                      ShortUnique id for inter-element referencing
                                                                                      Control0..1
                                                                                      Typestring
                                                                                      Is Modifierfalse
                                                                                      XML FormatIn the XML format, this property is represented as an attribute.
                                                                                      Summaryfalse
                                                                                      906. Parameters.parameter:reportNames.part:table6B-Line20a.part:table6B-Line20a-denexcl.extension
                                                                                      Definition

                                                                                      May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                                                                      ShortAdditional content defined by implementations
                                                                                      Comments

                                                                                      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                                      Control0..*
                                                                                      TypeExtension
                                                                                      Is Modifierfalse
                                                                                      Summaryfalse
                                                                                      Alternate Namesextensions, user content
                                                                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                                      908. Parameters.parameter:reportNames.part:table6B-Line20a.part:table6B-Line20a-denexcl.modifierExtension
                                                                                      Definition

                                                                                      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                                                                      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                                                                      ShortExtensions that cannot be ignored even if unrecognized
                                                                                      Comments

                                                                                      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                                      Control0..*
                                                                                      TypeExtension
                                                                                      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                                                                      Summarytrue
                                                                                      Requirements

                                                                                      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                                                                      Alternate Namesextensions, user content, modifiers
                                                                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                                      910. Parameters.parameter:reportNames.part:table6B-Line20a.part:table6B-Line20a-denexcl.name
                                                                                      Definition

                                                                                      The name of the parameter (reference to the operation definition).

                                                                                      ShortName from the definition
                                                                                      Control1..1
                                                                                      Typestring
                                                                                      Is Modifierfalse
                                                                                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                                      Must Supporttrue
                                                                                      Summarytrue
                                                                                      Fixed Valuetable6B-Line20a-HIV-Screening-CMS349-denexcl
                                                                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                      912. Parameters.parameter:reportNames.part:table6B-Line20a.part:table6B-Line20a-denexcl.value[x]
                                                                                      Definition

                                                                                      If the parameter is a data type.

                                                                                      ShortIf parameter is a data type
                                                                                      Control1..1
                                                                                      This element is affected by the following invariants: inv-1
                                                                                      Typeboolean
                                                                                      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                                                                      Is Modifierfalse
                                                                                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                                      Must Supporttrue
                                                                                      Summarytrue
                                                                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                      914. Parameters.parameter:reportNames.part:table6B-Line20a.part:table6B-Line20a-denexcl.resource
                                                                                      Definition

                                                                                      If the parameter is a whole resource.

                                                                                      ShortIf parameter is a whole resource
                                                                                      Comments

                                                                                      When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods.

                                                                                      Control0..1
                                                                                      This element is affected by the following invariants: inv-1
                                                                                      TypeResource
                                                                                      Is Modifierfalse
                                                                                      Summarytrue
                                                                                      916. Parameters.parameter:reportNames.part:table6B-Line20a.part:table6B-Line20a-denexcl.part
                                                                                      Definition

                                                                                      A named part of a multi-part parameter.

                                                                                      ShortNamed part of a multi-part parameter
                                                                                      Comments

                                                                                      Only one level of nested parameters is allowed.

                                                                                      Control0..*
                                                                                      TypeSeettp://hl7.org/fhir/StructureDefinition/Parameters#Parameters.parameter
                                                                                      Is Modifierfalse
                                                                                      Summarytrue
                                                                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                      918. Parameters.parameter:reportNames.part:table6B-Line20a.part:table6B-Line20a-num
                                                                                      Slice Nametable6B-Line20a-num
                                                                                      Definition

                                                                                      A named part of a multi-part parameter.

                                                                                      ShortNamed part of a multi-part parameter
                                                                                      Comments

                                                                                      Only one level of nested parameters is allowed.

                                                                                      Control0..1
                                                                                      TypeBackboneElement
                                                                                      Is Modifierfalse
                                                                                      Must Supporttrue
                                                                                      Summarytrue
                                                                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                      920. Parameters.parameter:reportNames.part:table6B-Line20a.part:table6B-Line20a-num.id
                                                                                      Definition

                                                                                      Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                                                                      ShortUnique id for inter-element referencing
                                                                                      Control0..1
                                                                                      Typestring
                                                                                      Is Modifierfalse
                                                                                      XML FormatIn the XML format, this property is represented as an attribute.
                                                                                      Summaryfalse
                                                                                      922. Parameters.parameter:reportNames.part:table6B-Line20a.part:table6B-Line20a-num.extension
                                                                                      Definition

                                                                                      May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                                                                      ShortAdditional content defined by implementations
                                                                                      Comments

                                                                                      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                                      Control0..*
                                                                                      TypeExtension
                                                                                      Is Modifierfalse
                                                                                      Summaryfalse
                                                                                      Alternate Namesextensions, user content
                                                                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                                      924. Parameters.parameter:reportNames.part:table6B-Line20a.part:table6B-Line20a-num.modifierExtension
                                                                                      Definition

                                                                                      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                                                                      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                                                                      ShortExtensions that cannot be ignored even if unrecognized
                                                                                      Comments

                                                                                      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                                      Control0..*
                                                                                      TypeExtension
                                                                                      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                                                                      Summarytrue
                                                                                      Requirements

                                                                                      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                                                                      Alternate Namesextensions, user content, modifiers
                                                                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                                      926. Parameters.parameter:reportNames.part:table6B-Line20a.part:table6B-Line20a-num.name
                                                                                      Definition

                                                                                      The name of the parameter (reference to the operation definition).

                                                                                      ShortName from the definition
                                                                                      Control1..1
                                                                                      Typestring
                                                                                      Is Modifierfalse
                                                                                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                                      Must Supporttrue
                                                                                      Summarytrue
                                                                                      Fixed Valuetable6B-Line20a-HIV-Screening-CMS349-num
                                                                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                      928. Parameters.parameter:reportNames.part:table6B-Line20a.part:table6B-Line20a-num.value[x]
                                                                                      Definition

                                                                                      If the parameter is a data type.

                                                                                      ShortIf parameter is a data type
                                                                                      Control1..1
                                                                                      This element is affected by the following invariants: inv-1
                                                                                      Typeboolean
                                                                                      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                                                                      Is Modifierfalse
                                                                                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                                      Must Supporttrue
                                                                                      Summarytrue
                                                                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                      930. Parameters.parameter:reportNames.part:table6B-Line20a.part:table6B-Line20a-num.resource
                                                                                      Definition

                                                                                      If the parameter is a whole resource.

                                                                                      ShortIf parameter is a whole resource
                                                                                      Comments

                                                                                      When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods.

                                                                                      Control0..1
                                                                                      This element is affected by the following invariants: inv-1
                                                                                      TypeResource
                                                                                      Is Modifierfalse
                                                                                      Summarytrue
                                                                                      932. Parameters.parameter:reportNames.part:table6B-Line20a.part:table6B-Line20a-num.part
                                                                                      Definition

                                                                                      A named part of a multi-part parameter.

                                                                                      ShortNamed part of a multi-part parameter
                                                                                      Comments

                                                                                      Only one level of nested parameters is allowed.

                                                                                      Control0..*
                                                                                      TypeSeettp://hl7.org/fhir/StructureDefinition/Parameters#Parameters.parameter
                                                                                      Is Modifierfalse
                                                                                      Summarytrue
                                                                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                      934. Parameters.parameter:reportNames.part:table6B-Line21
                                                                                      Slice Nametable6B-Line21
                                                                                      Definition

                                                                                      A named part of a multi-part parameter.

                                                                                      ShortNamed part of a multi-part parameter
                                                                                      Comments

                                                                                      Only one level of nested parameters is allowed.

                                                                                      Control1..1
                                                                                      TypeBackboneElement
                                                                                      Is Modifierfalse
                                                                                      Must Supporttrue
                                                                                      Summarytrue
                                                                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                      936. Parameters.parameter:reportNames.part:table6B-Line21.id
                                                                                      Definition

                                                                                      Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                                                                      ShortUnique id for inter-element referencing
                                                                                      Control0..1
                                                                                      Typestring
                                                                                      Is Modifierfalse
                                                                                      XML FormatIn the XML format, this property is represented as an attribute.
                                                                                      Summaryfalse
                                                                                      938. Parameters.parameter:reportNames.part:table6B-Line21.extension
                                                                                      Definition

                                                                                      May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                                                                      ShortAdditional content defined by implementations
                                                                                      Comments

                                                                                      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                                      Control0..*
                                                                                      TypeExtension
                                                                                      Is Modifierfalse
                                                                                      Summaryfalse
                                                                                      Alternate Namesextensions, user content
                                                                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                                      940. Parameters.parameter:reportNames.part:table6B-Line21.modifierExtension
                                                                                      Definition

                                                                                      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                                                                      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                                                                      ShortExtensions that cannot be ignored even if unrecognized
                                                                                      Comments

                                                                                      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                                      Control0..*
                                                                                      TypeExtension
                                                                                      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                                                                      Summarytrue
                                                                                      Requirements

                                                                                      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                                                                      Alternate Namesextensions, user content, modifiers
                                                                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                                      942. Parameters.parameter:reportNames.part:table6B-Line21.name
                                                                                      Definition

                                                                                      The name of the parameter (reference to the operation definition).

                                                                                      ShortName from the definition
                                                                                      Control1..1
                                                                                      Typestring
                                                                                      Is Modifierfalse
                                                                                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                                      Must Supporttrue
                                                                                      Summarytrue
                                                                                      Fixed Valuetable6B-Line21-Preventive-Care-And-Screening-For-Depression-CMS2
                                                                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                      944. Parameters.parameter:reportNames.part:table6B-Line21.value[x]
                                                                                      Definition

                                                                                      If the parameter is a data type.

                                                                                      ShortIf parameter is a data type
                                                                                      Control1..1
                                                                                      This element is affected by the following invariants: inv-1
                                                                                      Typeboolean
                                                                                      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                                                                      Is Modifierfalse
                                                                                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                                      Must Supporttrue
                                                                                      Summarytrue
                                                                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                      946. Parameters.parameter:reportNames.part:table6B-Line21.resource
                                                                                      Definition

                                                                                      If the parameter is a whole resource.

                                                                                      ShortIf parameter is a whole resource
                                                                                      Comments

                                                                                      When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods.

                                                                                      Control0..1
                                                                                      This element is affected by the following invariants: inv-1
                                                                                      TypeResource
                                                                                      Is Modifierfalse
                                                                                      Summarytrue
                                                                                      948. Parameters.parameter:reportNames.part:table6B-Line21.part
                                                                                      Definition

                                                                                      A named part of a multi-part parameter.

                                                                                      ShortNamed part of a multi-part parameter
                                                                                      Comments

                                                                                      Only one level of nested parameters is allowed.

                                                                                      Control0..*
                                                                                      TypeSeettp://hl7.org/fhir/StructureDefinition/Parameters#Parameters.parameter
                                                                                      Is Modifierfalse
                                                                                      Must Supporttrue
                                                                                      Summarytrue
                                                                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                      SlicingThis element introduces a set of slices on Parameters.parameter.part.part. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                                                                                      • value @ $this.name
                                                                                      • 950. Parameters.parameter:reportNames.part:table6B-Line21.part:table6B-Line21-den
                                                                                        Slice Nametable6B-Line21-den
                                                                                        Definition

                                                                                        A named part of a multi-part parameter.

                                                                                        ShortNamed part of a multi-part parameter
                                                                                        Comments

                                                                                        Only one level of nested parameters is allowed.

                                                                                        Control0..1
                                                                                        TypeBackboneElement
                                                                                        Is Modifierfalse
                                                                                        Must Supporttrue
                                                                                        Summarytrue
                                                                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                        952. Parameters.parameter:reportNames.part:table6B-Line21.part:table6B-Line21-den.id
                                                                                        Definition

                                                                                        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                                                                        ShortUnique id for inter-element referencing
                                                                                        Control0..1
                                                                                        Typestring
                                                                                        Is Modifierfalse
                                                                                        XML FormatIn the XML format, this property is represented as an attribute.
                                                                                        Summaryfalse
                                                                                        954. Parameters.parameter:reportNames.part:table6B-Line21.part:table6B-Line21-den.extension
                                                                                        Definition

                                                                                        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                                                                        ShortAdditional content defined by implementations
                                                                                        Comments

                                                                                        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                                        Control0..*
                                                                                        TypeExtension
                                                                                        Is Modifierfalse
                                                                                        Summaryfalse
                                                                                        Alternate Namesextensions, user content
                                                                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                                        956. Parameters.parameter:reportNames.part:table6B-Line21.part:table6B-Line21-den.modifierExtension
                                                                                        Definition

                                                                                        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                                                                        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                                                                        ShortExtensions that cannot be ignored even if unrecognized
                                                                                        Comments

                                                                                        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                                        Control0..*
                                                                                        TypeExtension
                                                                                        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                                                                        Summarytrue
                                                                                        Requirements

                                                                                        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                                                                        Alternate Namesextensions, user content, modifiers
                                                                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                                        958. Parameters.parameter:reportNames.part:table6B-Line21.part:table6B-Line21-den.name
                                                                                        Definition

                                                                                        The name of the parameter (reference to the operation definition).

                                                                                        ShortName from the definition
                                                                                        Control1..1
                                                                                        Typestring
                                                                                        Is Modifierfalse
                                                                                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                                        Must Supporttrue
                                                                                        Summarytrue
                                                                                        Fixed Valuetable6B-Line20a-HIV-Screening-CMS349-den
                                                                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                        960. Parameters.parameter:reportNames.part:table6B-Line21.part:table6B-Line21-den.value[x]
                                                                                        Definition

                                                                                        If the parameter is a data type.

                                                                                        ShortIf parameter is a data type
                                                                                        Control1..1
                                                                                        This element is affected by the following invariants: inv-1
                                                                                        Typeboolean
                                                                                        [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                                                                        Is Modifierfalse
                                                                                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                                        Must Supporttrue
                                                                                        Summarytrue
                                                                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                        962. Parameters.parameter:reportNames.part:table6B-Line21.part:table6B-Line21-den.resource
                                                                                        Definition

                                                                                        If the parameter is a whole resource.

                                                                                        ShortIf parameter is a whole resource
                                                                                        Comments

                                                                                        When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods.

                                                                                        Control0..1
                                                                                        This element is affected by the following invariants: inv-1
                                                                                        TypeResource
                                                                                        Is Modifierfalse
                                                                                        Summarytrue
                                                                                        964. Parameters.parameter:reportNames.part:table6B-Line21.part:table6B-Line21-den.part
                                                                                        Definition

                                                                                        A named part of a multi-part parameter.

                                                                                        ShortNamed part of a multi-part parameter
                                                                                        Comments

                                                                                        Only one level of nested parameters is allowed.

                                                                                        Control0..*
                                                                                        TypeSeettp://hl7.org/fhir/StructureDefinition/Parameters#Parameters.parameter
                                                                                        Is Modifierfalse
                                                                                        Summarytrue
                                                                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                        966. Parameters.parameter:reportNames.part:table6B-Line21.part:table6B-Line21-denexcl
                                                                                        Slice Nametable6B-Line21-denexcl
                                                                                        Definition

                                                                                        A named part of a multi-part parameter.

                                                                                        ShortNamed part of a multi-part parameter
                                                                                        Comments

                                                                                        Only one level of nested parameters is allowed.

                                                                                        Control0..1
                                                                                        TypeBackboneElement
                                                                                        Is Modifierfalse
                                                                                        Must Supporttrue
                                                                                        Summarytrue
                                                                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                        968. Parameters.parameter:reportNames.part:table6B-Line21.part:table6B-Line21-denexcl.id
                                                                                        Definition

                                                                                        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                                                                        ShortUnique id for inter-element referencing
                                                                                        Control0..1
                                                                                        Typestring
                                                                                        Is Modifierfalse
                                                                                        XML FormatIn the XML format, this property is represented as an attribute.
                                                                                        Summaryfalse
                                                                                        970. Parameters.parameter:reportNames.part:table6B-Line21.part:table6B-Line21-denexcl.extension
                                                                                        Definition

                                                                                        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                                                                        ShortAdditional content defined by implementations
                                                                                        Comments

                                                                                        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                                        Control0..*
                                                                                        TypeExtension
                                                                                        Is Modifierfalse
                                                                                        Summaryfalse
                                                                                        Alternate Namesextensions, user content
                                                                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                                        972. Parameters.parameter:reportNames.part:table6B-Line21.part:table6B-Line21-denexcl.modifierExtension
                                                                                        Definition

                                                                                        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                                                                        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                                                                        ShortExtensions that cannot be ignored even if unrecognized
                                                                                        Comments

                                                                                        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                                        Control0..*
                                                                                        TypeExtension
                                                                                        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                                                                        Summarytrue
                                                                                        Requirements

                                                                                        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                                                                        Alternate Namesextensions, user content, modifiers
                                                                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                                        974. Parameters.parameter:reportNames.part:table6B-Line21.part:table6B-Line21-denexcl.name
                                                                                        Definition

                                                                                        The name of the parameter (reference to the operation definition).

                                                                                        ShortName from the definition
                                                                                        Control1..1
                                                                                        Typestring
                                                                                        Is Modifierfalse
                                                                                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                                        Must Supporttrue
                                                                                        Summarytrue
                                                                                        Fixed Valuetable6B-Line20a-HIV-Screening-CMS349-denexcl
                                                                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                        976. Parameters.parameter:reportNames.part:table6B-Line21.part:table6B-Line21-denexcl.value[x]
                                                                                        Definition

                                                                                        If the parameter is a data type.

                                                                                        ShortIf parameter is a data type
                                                                                        Control1..1
                                                                                        This element is affected by the following invariants: inv-1
                                                                                        Typeboolean
                                                                                        [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                                                                        Is Modifierfalse
                                                                                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                                        Must Supporttrue
                                                                                        Summarytrue
                                                                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                        978. Parameters.parameter:reportNames.part:table6B-Line21.part:table6B-Line21-denexcl.resource
                                                                                        Definition

                                                                                        If the parameter is a whole resource.

                                                                                        ShortIf parameter is a whole resource
                                                                                        Comments

                                                                                        When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods.

                                                                                        Control0..1
                                                                                        This element is affected by the following invariants: inv-1
                                                                                        TypeResource
                                                                                        Is Modifierfalse
                                                                                        Summarytrue
                                                                                        980. Parameters.parameter:reportNames.part:table6B-Line21.part:table6B-Line21-denexcl.part
                                                                                        Definition

                                                                                        A named part of a multi-part parameter.

                                                                                        ShortNamed part of a multi-part parameter
                                                                                        Comments

                                                                                        Only one level of nested parameters is allowed.

                                                                                        Control0..*
                                                                                        TypeSeettp://hl7.org/fhir/StructureDefinition/Parameters#Parameters.parameter
                                                                                        Is Modifierfalse
                                                                                        Summarytrue
                                                                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                        982. Parameters.parameter:reportNames.part:table6B-Line21.part:table6B-Line21-num
                                                                                        Slice Nametable6B-Line21-num
                                                                                        Definition

                                                                                        A named part of a multi-part parameter.

                                                                                        ShortNamed part of a multi-part parameter
                                                                                        Comments

                                                                                        Only one level of nested parameters is allowed.

                                                                                        Control0..1
                                                                                        TypeBackboneElement
                                                                                        Is Modifierfalse
                                                                                        Must Supporttrue
                                                                                        Summarytrue
                                                                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                        984. Parameters.parameter:reportNames.part:table6B-Line21.part:table6B-Line21-num.id
                                                                                        Definition

                                                                                        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                                                                        ShortUnique id for inter-element referencing
                                                                                        Control0..1
                                                                                        Typestring
                                                                                        Is Modifierfalse
                                                                                        XML FormatIn the XML format, this property is represented as an attribute.
                                                                                        Summaryfalse
                                                                                        986. Parameters.parameter:reportNames.part:table6B-Line21.part:table6B-Line21-num.extension
                                                                                        Definition

                                                                                        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                                                                        ShortAdditional content defined by implementations
                                                                                        Comments

                                                                                        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                                        Control0..*
                                                                                        TypeExtension
                                                                                        Is Modifierfalse
                                                                                        Summaryfalse
                                                                                        Alternate Namesextensions, user content
                                                                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                                        988. Parameters.parameter:reportNames.part:table6B-Line21.part:table6B-Line21-num.modifierExtension
                                                                                        Definition

                                                                                        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                                                                        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                                                                        ShortExtensions that cannot be ignored even if unrecognized
                                                                                        Comments

                                                                                        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                                        Control0..*
                                                                                        TypeExtension
                                                                                        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                                                                        Summarytrue
                                                                                        Requirements

                                                                                        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                                                                        Alternate Namesextensions, user content, modifiers
                                                                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                                        990. Parameters.parameter:reportNames.part:table6B-Line21.part:table6B-Line21-num.name
                                                                                        Definition

                                                                                        The name of the parameter (reference to the operation definition).

                                                                                        ShortName from the definition
                                                                                        Control1..1
                                                                                        Typestring
                                                                                        Is Modifierfalse
                                                                                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                                        Must Supporttrue
                                                                                        Summarytrue
                                                                                        Fixed Valuetable6B-Line20a-HIV-Screening-CMS349-num
                                                                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                        992. Parameters.parameter:reportNames.part:table6B-Line21.part:table6B-Line21-num.value[x]
                                                                                        Definition

                                                                                        If the parameter is a data type.

                                                                                        ShortIf parameter is a data type
                                                                                        Control1..1
                                                                                        This element is affected by the following invariants: inv-1
                                                                                        Typeboolean
                                                                                        [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                                                                        Is Modifierfalse
                                                                                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                                        Must Supporttrue
                                                                                        Summarytrue
                                                                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                        994. Parameters.parameter:reportNames.part:table6B-Line21.part:table6B-Line21-num.resource
                                                                                        Definition

                                                                                        If the parameter is a whole resource.

                                                                                        ShortIf parameter is a whole resource
                                                                                        Comments

                                                                                        When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods.

                                                                                        Control0..1
                                                                                        This element is affected by the following invariants: inv-1
                                                                                        TypeResource
                                                                                        Is Modifierfalse
                                                                                        Summarytrue
                                                                                        996. Parameters.parameter:reportNames.part:table6B-Line21.part:table6B-Line21-num.part
                                                                                        Definition

                                                                                        A named part of a multi-part parameter.

                                                                                        ShortNamed part of a multi-part parameter
                                                                                        Comments

                                                                                        Only one level of nested parameters is allowed.

                                                                                        Control0..*
                                                                                        TypeSeettp://hl7.org/fhir/StructureDefinition/Parameters#Parameters.parameter
                                                                                        Is Modifierfalse
                                                                                        Summarytrue
                                                                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                        998. Parameters.parameter:reportNames.part:table6B-Line21a
                                                                                        Slice Nametable6B-Line21a
                                                                                        Definition

                                                                                        A named part of a multi-part parameter.

                                                                                        ShortNamed part of a multi-part parameter
                                                                                        Comments

                                                                                        Only one level of nested parameters is allowed.

                                                                                        Control1..1
                                                                                        TypeBackboneElement
                                                                                        Is Modifierfalse
                                                                                        Must Supporttrue
                                                                                        Summarytrue
                                                                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                        1000. Parameters.parameter:reportNames.part:table6B-Line21a.id
                                                                                        Definition

                                                                                        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                                                                        ShortUnique id for inter-element referencing
                                                                                        Control0..1
                                                                                        Typestring
                                                                                        Is Modifierfalse
                                                                                        XML FormatIn the XML format, this property is represented as an attribute.
                                                                                        Summaryfalse
                                                                                        1002. Parameters.parameter:reportNames.part:table6B-Line21a.extension
                                                                                        Definition

                                                                                        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                                                                        ShortAdditional content defined by implementations
                                                                                        Comments

                                                                                        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                                        Control0..*
                                                                                        TypeExtension
                                                                                        Is Modifierfalse
                                                                                        Summaryfalse
                                                                                        Alternate Namesextensions, user content
                                                                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                                        1004. Parameters.parameter:reportNames.part:table6B-Line21a.modifierExtension
                                                                                        Definition

                                                                                        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                                                                        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                                                                        ShortExtensions that cannot be ignored even if unrecognized
                                                                                        Comments

                                                                                        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                                        Control0..*
                                                                                        TypeExtension
                                                                                        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                                                                        Summarytrue
                                                                                        Requirements

                                                                                        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                                                                        Alternate Namesextensions, user content, modifiers
                                                                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                                        1006. Parameters.parameter:reportNames.part:table6B-Line21a.name
                                                                                        Definition

                                                                                        The name of the parameter (reference to the operation definition).

                                                                                        ShortName from the definition
                                                                                        Control1..1
                                                                                        Typestring
                                                                                        Is Modifierfalse
                                                                                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                                        Must Supporttrue
                                                                                        Summarytrue
                                                                                        Fixed Valuetable6B-Line21a-Depression-Remission-At-Twelve-Months-CMS159
                                                                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                        1008. Parameters.parameter:reportNames.part:table6B-Line21a.value[x]
                                                                                        Definition

                                                                                        If the parameter is a data type.

                                                                                        ShortIf parameter is a data type
                                                                                        Control1..1
                                                                                        This element is affected by the following invariants: inv-1
                                                                                        Typeboolean
                                                                                        [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                                                                        Is Modifierfalse
                                                                                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                                        Must Supporttrue
                                                                                        Summarytrue
                                                                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                        1010. Parameters.parameter:reportNames.part:table6B-Line21a.resource
                                                                                        Definition

                                                                                        If the parameter is a whole resource.

                                                                                        ShortIf parameter is a whole resource
                                                                                        Comments

                                                                                        When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods.

                                                                                        Control0..1
                                                                                        This element is affected by the following invariants: inv-1
                                                                                        TypeResource
                                                                                        Is Modifierfalse
                                                                                        Summarytrue
                                                                                        1012. Parameters.parameter:reportNames.part:table6B-Line21a.part
                                                                                        Definition

                                                                                        A named part of a multi-part parameter.

                                                                                        ShortNamed part of a multi-part parameter
                                                                                        Comments

                                                                                        Only one level of nested parameters is allowed.

                                                                                        Control0..*
                                                                                        TypeSeettp://hl7.org/fhir/StructureDefinition/Parameters#Parameters.parameter
                                                                                        Is Modifierfalse
                                                                                        Summarytrue
                                                                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                        1014. Parameters.parameter:reportNames.part:table6B-Line22
                                                                                        Slice Nametable6B-Line22
                                                                                        Definition

                                                                                        A named part of a multi-part parameter.

                                                                                        ShortNamed part of a multi-part parameter
                                                                                        Comments

                                                                                        Only one level of nested parameters is allowed.

                                                                                        Control1..1
                                                                                        TypeBackboneElement
                                                                                        Is Modifierfalse
                                                                                        Must Supporttrue
                                                                                        Summarytrue
                                                                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                        1016. Parameters.parameter:reportNames.part:table6B-Line22.id
                                                                                        Definition

                                                                                        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                                                                        ShortUnique id for inter-element referencing
                                                                                        Control0..1
                                                                                        Typestring
                                                                                        Is Modifierfalse
                                                                                        XML FormatIn the XML format, this property is represented as an attribute.
                                                                                        Summaryfalse
                                                                                        1018. Parameters.parameter:reportNames.part:table6B-Line22.extension
                                                                                        Definition

                                                                                        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                                                                        ShortAdditional content defined by implementations
                                                                                        Comments

                                                                                        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                                        Control0..*
                                                                                        TypeExtension
                                                                                        Is Modifierfalse
                                                                                        Summaryfalse
                                                                                        Alternate Namesextensions, user content
                                                                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                                        1020. Parameters.parameter:reportNames.part:table6B-Line22.modifierExtension
                                                                                        Definition

                                                                                        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                                                                        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                                                                        ShortExtensions that cannot be ignored even if unrecognized
                                                                                        Comments

                                                                                        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                                        Control0..*
                                                                                        TypeExtension
                                                                                        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                                                                        Summarytrue
                                                                                        Requirements

                                                                                        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                                                                        Alternate Namesextensions, user content, modifiers
                                                                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                                        1022. Parameters.parameter:reportNames.part:table6B-Line22.name
                                                                                        Definition

                                                                                        The name of the parameter (reference to the operation definition).

                                                                                        ShortName from the definition
                                                                                        Control1..1
                                                                                        Typestring
                                                                                        Is Modifierfalse
                                                                                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                                        Must Supporttrue
                                                                                        Summarytrue
                                                                                        Fixed Valuetable6B-Line22-Dental-Sealants-For-Children-CMS277
                                                                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                        1024. Parameters.parameter:reportNames.part:table6B-Line22.value[x]
                                                                                        Definition

                                                                                        If the parameter is a data type.

                                                                                        ShortIf parameter is a data type
                                                                                        Control1..1
                                                                                        This element is affected by the following invariants: inv-1
                                                                                        Typeboolean
                                                                                        [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                                                                        Is Modifierfalse
                                                                                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                                        Must Supporttrue
                                                                                        Summarytrue
                                                                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                        1026. Parameters.parameter:reportNames.part:table6B-Line22.resource
                                                                                        Definition

                                                                                        If the parameter is a whole resource.

                                                                                        ShortIf parameter is a whole resource
                                                                                        Comments

                                                                                        When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods.

                                                                                        Control0..1
                                                                                        This element is affected by the following invariants: inv-1
                                                                                        TypeResource
                                                                                        Is Modifierfalse
                                                                                        Summarytrue
                                                                                        1028. Parameters.parameter:reportNames.part:table6B-Line22.part
                                                                                        Definition

                                                                                        A named part of a multi-part parameter.

                                                                                        ShortNamed part of a multi-part parameter
                                                                                        Comments

                                                                                        Only one level of nested parameters is allowed.

                                                                                        Control0..*
                                                                                        TypeSeettp://hl7.org/fhir/StructureDefinition/Parameters#Parameters.parameter
                                                                                        Is Modifierfalse
                                                                                        Summarytrue
                                                                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                        1030. Parameters.parameter:reportNames.part:table7-Line0
                                                                                        Slice Nametable7-Line0
                                                                                        Definition

                                                                                        A named part of a multi-part parameter.

                                                                                        ShortNamed part of a multi-part parameter
                                                                                        Comments

                                                                                        Only one level of nested parameters is allowed.

                                                                                        Control1..1
                                                                                        TypeBackboneElement
                                                                                        Is Modifierfalse
                                                                                        Must Supporttrue
                                                                                        Summarytrue
                                                                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                        1032. Parameters.parameter:reportNames.part:table7-Line0.id
                                                                                        Definition

                                                                                        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                                                                        ShortUnique id for inter-element referencing
                                                                                        Control0..1
                                                                                        Typestring
                                                                                        Is Modifierfalse
                                                                                        XML FormatIn the XML format, this property is represented as an attribute.
                                                                                        Summaryfalse
                                                                                        1034. Parameters.parameter:reportNames.part:table7-Line0.extension
                                                                                        Definition

                                                                                        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                                                                        ShortAdditional content defined by implementations
                                                                                        Comments

                                                                                        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                                        Control0..*
                                                                                        TypeExtension
                                                                                        Is Modifierfalse
                                                                                        Summaryfalse
                                                                                        Alternate Namesextensions, user content
                                                                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                                        1036. Parameters.parameter:reportNames.part:table7-Line0.modifierExtension
                                                                                        Definition

                                                                                        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                                                                        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                                                                        ShortExtensions that cannot be ignored even if unrecognized
                                                                                        Comments

                                                                                        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                                        Control0..*
                                                                                        TypeExtension
                                                                                        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                                                                        Summarytrue
                                                                                        Requirements

                                                                                        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                                                                        Alternate Namesextensions, user content, modifiers
                                                                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                                        1038. Parameters.parameter:reportNames.part:table7-Line0.name
                                                                                        Definition

                                                                                        The name of the parameter (reference to the operation definition).

                                                                                        ShortName from the definition
                                                                                        Control1..1
                                                                                        Typestring
                                                                                        Is Modifierfalse
                                                                                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                                        Must Supporttrue
                                                                                        Summarytrue
                                                                                        Fixed Valuetable7-Line0-HIV-Positive-Pregnant-Patients
                                                                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                        1040. Parameters.parameter:reportNames.part:table7-Line0.value[x]
                                                                                        Definition

                                                                                        If the parameter is a data type.

                                                                                        ShortIf parameter is a data type
                                                                                        Control1..1
                                                                                        This element is affected by the following invariants: inv-1
                                                                                        Typeboolean
                                                                                        [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                                                                        Is Modifierfalse
                                                                                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                                        Must Supporttrue
                                                                                        Summarytrue
                                                                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                        1042. Parameters.parameter:reportNames.part:table7-Line0.resource
                                                                                        Definition

                                                                                        If the parameter is a whole resource.

                                                                                        ShortIf parameter is a whole resource
                                                                                        Comments

                                                                                        When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods.

                                                                                        Control0..1
                                                                                        This element is affected by the following invariants: inv-1
                                                                                        TypeResource
                                                                                        Is Modifierfalse
                                                                                        Summarytrue
                                                                                        1044. Parameters.parameter:reportNames.part:table7-Line0.part
                                                                                        Definition

                                                                                        A named part of a multi-part parameter.

                                                                                        ShortNamed part of a multi-part parameter
                                                                                        Comments

                                                                                        Only one level of nested parameters is allowed.

                                                                                        Control0..*
                                                                                        TypeSeettp://hl7.org/fhir/StructureDefinition/Parameters#Parameters.parameter
                                                                                        Is Modifierfalse
                                                                                        Summarytrue
                                                                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                        1046. Parameters.parameter:reportNames.part:table7-Line2
                                                                                        Slice Nametable7-Line2
                                                                                        Definition

                                                                                        A named part of a multi-part parameter.

                                                                                        ShortNamed part of a multi-part parameter
                                                                                        Comments

                                                                                        Only one level of nested parameters is allowed.

                                                                                        Control1..1
                                                                                        TypeBackboneElement
                                                                                        Is Modifierfalse
                                                                                        Must Supporttrue
                                                                                        Summarytrue
                                                                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                        1048. Parameters.parameter:reportNames.part:table7-Line2.id
                                                                                        Definition

                                                                                        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                                                                        ShortUnique id for inter-element referencing
                                                                                        Control0..1
                                                                                        Typestring
                                                                                        Is Modifierfalse
                                                                                        XML FormatIn the XML format, this property is represented as an attribute.
                                                                                        Summaryfalse
                                                                                        1050. Parameters.parameter:reportNames.part:table7-Line2.extension
                                                                                        Definition

                                                                                        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                                                                        ShortAdditional content defined by implementations
                                                                                        Comments

                                                                                        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                                        Control0..*
                                                                                        TypeExtension
                                                                                        Is Modifierfalse
                                                                                        Summaryfalse
                                                                                        Alternate Namesextensions, user content
                                                                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                                        1052. Parameters.parameter:reportNames.part:table7-Line2.modifierExtension
                                                                                        Definition

                                                                                        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                                                                        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                                                                        ShortExtensions that cannot be ignored even if unrecognized
                                                                                        Comments

                                                                                        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                                        Control0..*
                                                                                        TypeExtension
                                                                                        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                                                                        Summarytrue
                                                                                        Requirements

                                                                                        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                                                                        Alternate Namesextensions, user content, modifiers
                                                                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                                        1054. Parameters.parameter:reportNames.part:table7-Line2.name
                                                                                        Definition

                                                                                        The name of the parameter (reference to the operation definition).

                                                                                        ShortName from the definition
                                                                                        Control1..1
                                                                                        Typestring
                                                                                        Is Modifierfalse
                                                                                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                                        Must Supporttrue
                                                                                        Summarytrue
                                                                                        Fixed Valuetable7-Line2-Deliveries-Performed-By-Health-Center
                                                                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                        1056. Parameters.parameter:reportNames.part:table7-Line2.value[x]
                                                                                        Definition

                                                                                        If the parameter is a data type.

                                                                                        ShortIf parameter is a data type
                                                                                        Control1..1
                                                                                        This element is affected by the following invariants: inv-1
                                                                                        Typeboolean
                                                                                        [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                                                                        Is Modifierfalse
                                                                                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                                        Must Supporttrue
                                                                                        Summarytrue
                                                                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                        1058. Parameters.parameter:reportNames.part:table7-Line2.resource
                                                                                        Definition

                                                                                        If the parameter is a whole resource.

                                                                                        ShortIf parameter is a whole resource
                                                                                        Comments

                                                                                        When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods.

                                                                                        Control0..1
                                                                                        This element is affected by the following invariants: inv-1
                                                                                        TypeResource
                                                                                        Is Modifierfalse
                                                                                        Summarytrue
                                                                                        1060. Parameters.parameter:reportNames.part:table7-Line2.part
                                                                                        Definition

                                                                                        A named part of a multi-part parameter.

                                                                                        ShortNamed part of a multi-part parameter
                                                                                        Comments

                                                                                        Only one level of nested parameters is allowed.

                                                                                        Control0..*
                                                                                        TypeSeettp://hl7.org/fhir/StructureDefinition/Parameters#Parameters.parameter
                                                                                        Is Modifierfalse
                                                                                        Summarytrue
                                                                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                        1062. Parameters.parameter:reportNames.part:table7-Line1a-d
                                                                                        Slice Nametable7-Line1a-d
                                                                                        Definition

                                                                                        A named part of a multi-part parameter.

                                                                                        ShortNamed part of a multi-part parameter
                                                                                        Comments

                                                                                        Only one level of nested parameters is allowed.

                                                                                        Control1..1
                                                                                        TypeBackboneElement
                                                                                        Is Modifierfalse
                                                                                        Must Supporttrue
                                                                                        Summarytrue
                                                                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                        1064. Parameters.parameter:reportNames.part:table7-Line1a-d.id
                                                                                        Definition

                                                                                        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                                                                        ShortUnique id for inter-element referencing
                                                                                        Control0..1
                                                                                        Typestring
                                                                                        Is Modifierfalse
                                                                                        XML FormatIn the XML format, this property is represented as an attribute.
                                                                                        Summaryfalse
                                                                                        1066. Parameters.parameter:reportNames.part:table7-Line1a-d.extension
                                                                                        Definition

                                                                                        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                                                                        ShortAdditional content defined by implementations
                                                                                        Comments

                                                                                        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                                        Control0..*
                                                                                        TypeExtension
                                                                                        Is Modifierfalse
                                                                                        Summaryfalse
                                                                                        Alternate Namesextensions, user content
                                                                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                                        1068. Parameters.parameter:reportNames.part:table7-Line1a-d.modifierExtension
                                                                                        Definition

                                                                                        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                                                                        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                                                                        ShortExtensions that cannot be ignored even if unrecognized
                                                                                        Comments

                                                                                        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                                        Control0..*
                                                                                        TypeExtension
                                                                                        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                                                                        Summarytrue
                                                                                        Requirements

                                                                                        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                                                                        Alternate Namesextensions, user content, modifiers
                                                                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                                        1070. Parameters.parameter:reportNames.part:table7-Line1a-d.name
                                                                                        Definition

                                                                                        The name of the parameter (reference to the operation definition).

                                                                                        ShortName from the definition
                                                                                        Control1..1
                                                                                        Typestring
                                                                                        Is Modifierfalse
                                                                                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                                        Must Supporttrue
                                                                                        Summarytrue
                                                                                        Fixed Valuetable7-Line1a-d-Prenatal-Care-Patient-Deliveries
                                                                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                        1072. Parameters.parameter:reportNames.part:table7-Line1a-d.value[x]
                                                                                        Definition

                                                                                        If the parameter is a data type.

                                                                                        ShortIf parameter is a data type
                                                                                        Control1..1
                                                                                        This element is affected by the following invariants: inv-1
                                                                                        Typeboolean
                                                                                        [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                                                                        Is Modifierfalse
                                                                                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                                        Must Supporttrue
                                                                                        Summarytrue
                                                                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                        1074. Parameters.parameter:reportNames.part:table7-Line1a-d.resource
                                                                                        Definition

                                                                                        If the parameter is a whole resource.

                                                                                        ShortIf parameter is a whole resource
                                                                                        Comments

                                                                                        When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods.

                                                                                        Control0..1
                                                                                        This element is affected by the following invariants: inv-1
                                                                                        TypeResource
                                                                                        Is Modifierfalse
                                                                                        Summarytrue
                                                                                        1076. Parameters.parameter:reportNames.part:table7-Line1a-d.part
                                                                                        Definition

                                                                                        A named part of a multi-part parameter.

                                                                                        ShortNamed part of a multi-part parameter
                                                                                        Comments

                                                                                        Only one level of nested parameters is allowed.

                                                                                        Control0..*
                                                                                        TypeSeettp://hl7.org/fhir/StructureDefinition/Parameters#Parameters.parameter
                                                                                        Is Modifierfalse
                                                                                        Summarytrue
                                                                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                        1078. Parameters.parameter:reportNames.part:table7-Line2a-c
                                                                                        Slice Nametable7-Line2a-c
                                                                                        Definition

                                                                                        A named part of a multi-part parameter.

                                                                                        ShortNamed part of a multi-part parameter
                                                                                        Comments

                                                                                        Only one level of nested parameters is allowed.

                                                                                        Control1..1
                                                                                        TypeBackboneElement
                                                                                        Is Modifierfalse
                                                                                        Must Supporttrue
                                                                                        Summarytrue
                                                                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                        1080. Parameters.parameter:reportNames.part:table7-Line2a-c.id
                                                                                        Definition

                                                                                        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                                                                        ShortUnique id for inter-element referencing
                                                                                        Control0..1
                                                                                        Typestring
                                                                                        Is Modifierfalse
                                                                                        XML FormatIn the XML format, this property is represented as an attribute.
                                                                                        Summaryfalse
                                                                                        1082. Parameters.parameter:reportNames.part:table7-Line2a-c.extension
                                                                                        Definition

                                                                                        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                                                                        ShortAdditional content defined by implementations
                                                                                        Comments

                                                                                        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                                        Control0..*
                                                                                        TypeExtension
                                                                                        Is Modifierfalse
                                                                                        Summaryfalse
                                                                                        Alternate Namesextensions, user content
                                                                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                                        1084. Parameters.parameter:reportNames.part:table7-Line2a-c.modifierExtension
                                                                                        Definition

                                                                                        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                                                                        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                                                                        ShortExtensions that cannot be ignored even if unrecognized
                                                                                        Comments

                                                                                        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                                        Control0..*
                                                                                        TypeExtension
                                                                                        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                                                                        Summarytrue
                                                                                        Requirements

                                                                                        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                                                                        Alternate Namesextensions, user content, modifiers
                                                                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                                        1086. Parameters.parameter:reportNames.part:table7-Line2a-c.name
                                                                                        Definition

                                                                                        The name of the parameter (reference to the operation definition).

                                                                                        ShortName from the definition
                                                                                        Control1..1
                                                                                        Typestring
                                                                                        Is Modifierfalse
                                                                                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                                        Must Supporttrue
                                                                                        Summarytrue
                                                                                        Fixed Valuetable7-Line2a-c-Controlling-High-Blood-Pressure-CMS165
                                                                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                        1088. Parameters.parameter:reportNames.part:table7-Line2a-c.value[x]
                                                                                        Definition

                                                                                        If the parameter is a data type.

                                                                                        ShortIf parameter is a data type
                                                                                        Control1..1
                                                                                        This element is affected by the following invariants: inv-1
                                                                                        Typeboolean
                                                                                        [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                                                                        Is Modifierfalse
                                                                                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                                        Must Supporttrue
                                                                                        Summarytrue
                                                                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                        1090. Parameters.parameter:reportNames.part:table7-Line2a-c.resource
                                                                                        Definition

                                                                                        If the parameter is a whole resource.

                                                                                        ShortIf parameter is a whole resource
                                                                                        Comments

                                                                                        When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods.

                                                                                        Control0..1
                                                                                        This element is affected by the following invariants: inv-1
                                                                                        TypeResource
                                                                                        Is Modifierfalse
                                                                                        Summarytrue
                                                                                        1092. Parameters.parameter:reportNames.part:table7-Line2a-c.part
                                                                                        Definition

                                                                                        A named part of a multi-part parameter.

                                                                                        ShortNamed part of a multi-part parameter
                                                                                        Comments

                                                                                        Only one level of nested parameters is allowed.

                                                                                        Control0..*
                                                                                        TypeSeettp://hl7.org/fhir/StructureDefinition/Parameters#Parameters.parameter
                                                                                        Is Modifierfalse
                                                                                        Summarytrue
                                                                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                        1094. Parameters.parameter:reportNames.part:table7-Line3a-f
                                                                                        Slice Nametable7-Line3a-f
                                                                                        Definition

                                                                                        A named part of a multi-part parameter.

                                                                                        ShortNamed part of a multi-part parameter
                                                                                        Comments

                                                                                        Only one level of nested parameters is allowed.

                                                                                        Control1..1
                                                                                        TypeBackboneElement
                                                                                        Is Modifierfalse
                                                                                        Must Supporttrue
                                                                                        Summarytrue
                                                                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                        1096. Parameters.parameter:reportNames.part:table7-Line3a-f.id
                                                                                        Definition

                                                                                        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                                                                        ShortUnique id for inter-element referencing
                                                                                        Control0..1
                                                                                        Typestring
                                                                                        Is Modifierfalse
                                                                                        XML FormatIn the XML format, this property is represented as an attribute.
                                                                                        Summaryfalse
                                                                                        1098. Parameters.parameter:reportNames.part:table7-Line3a-f.extension
                                                                                        Definition

                                                                                        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                                                                        ShortAdditional content defined by implementations
                                                                                        Comments

                                                                                        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                                        Control0..*
                                                                                        TypeExtension
                                                                                        Is Modifierfalse
                                                                                        Summaryfalse
                                                                                        Alternate Namesextensions, user content
                                                                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                                        1100. Parameters.parameter:reportNames.part:table7-Line3a-f.modifierExtension
                                                                                        Definition

                                                                                        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                                                                        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                                                                        ShortExtensions that cannot be ignored even if unrecognized
                                                                                        Comments

                                                                                        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                                        Control0..*
                                                                                        TypeExtension
                                                                                        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                                                                        Summarytrue
                                                                                        Requirements

                                                                                        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                                                                        Alternate Namesextensions, user content, modifiers
                                                                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                                        1102. Parameters.parameter:reportNames.part:table7-Line3a-f.name
                                                                                        Definition

                                                                                        The name of the parameter (reference to the operation definition).

                                                                                        ShortName from the definition
                                                                                        Control1..1
                                                                                        Typestring
                                                                                        Is Modifierfalse
                                                                                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                                        Must Supporttrue
                                                                                        Summarytrue
                                                                                        Fixed Valuetable7-Line3a-f-HbA1c-Poor-Control-CMS122
                                                                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                        1104. Parameters.parameter:reportNames.part:table7-Line3a-f.value[x]
                                                                                        Definition

                                                                                        If the parameter is a data type.

                                                                                        ShortIf parameter is a data type
                                                                                        Control1..1
                                                                                        This element is affected by the following invariants: inv-1
                                                                                        Typeboolean
                                                                                        [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                                                                        Is Modifierfalse
                                                                                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                                        Must Supporttrue
                                                                                        Summarytrue
                                                                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                        1106. Parameters.parameter:reportNames.part:table7-Line3a-f.resource
                                                                                        Definition

                                                                                        If the parameter is a whole resource.

                                                                                        ShortIf parameter is a whole resource
                                                                                        Comments

                                                                                        When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods.

                                                                                        Control0..1
                                                                                        This element is affected by the following invariants: inv-1
                                                                                        TypeResource
                                                                                        Is Modifierfalse
                                                                                        Summarytrue
                                                                                        1108. Parameters.parameter:reportNames.part:table7-Line3a-f.part
                                                                                        Definition

                                                                                        A named part of a multi-part parameter.

                                                                                        ShortNamed part of a multi-part parameter
                                                                                        Comments

                                                                                        Only one level of nested parameters is allowed.

                                                                                        Control0..*
                                                                                        TypeSeettp://hl7.org/fhir/StructureDefinition/Parameters#Parameters.parameter
                                                                                        Is Modifierfalse
                                                                                        Summarytrue
                                                                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))